[Sun Aug 12 10:22:41 2012] Detection parameters:
  Position = (381.7, 223.7) = 13 33 32.94 -31 37 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.1 +/- 17.4
  Background counts = 139.8
  Rate = 0.005 +/- 0.0009

[Sun Aug 12 10:22:41 2012] Off-axis axis estimate = 8.11'
[Sun Aug 12 10:26:58 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 10:26:58 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Sun Aug 12 10:26:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.003
[Sun Aug 12 10:26:58 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 10.49"
[Sun Aug 12 13:22:13 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src34.ximg exists
[Sun Aug 12 13:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src34.csv
[Sun Aug 12 13:22:13 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Aug 12 13:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src34.csv
[Sun Aug 12 13:22:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:22:14 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Aug 12 13:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Aug 12 13:22:14 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Aug 12 13:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Aug 12 13:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:44:58 2012] Source 35 is offset by -3.470063 and 0.490874 pixels which is larger than
2 X fitted extent = 1.227462 x 1.227462, not incorporating fit results
[Sun Aug 12 16:44:58 2012] Warning, spatial fit 34 centroid is now closest to src. 36
[Sun Aug 12 16:44:58 2012] Spatial fit model total counts = 2276.210000, observed total counts = 2275.000000
[Sun Aug 12 16:44:58 2012] Offset between fit and detection position for source 35 = 2.319986 pixels
[Sun Aug 12 16:44:58 2012] Warning, changing simple spatial fit ID from 34 to 35
[Sun Aug 12 16:44:58 2012] 2183.535500 total counts/ 2150.810000 bgd. counts: snr = 0.705643
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.319986 pixels
  Position = (380.5, 225.6) = 13 33 33.36 -31 37 21.2
  Extent = 10.3 (6.5-21.0)", rotation angle = 0
  Source counts = 32.7 +/- 46.7
  Background counts = 2150.8
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability