[Sun Aug 12 10:22:40 2012] Detection parameters:
  Position = (208.5, 338.7) = 13 34 31.88 -31 29 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.5 +/- 12.4
  Background counts = 32.0
  Rate = 0.007 +/- 0.001

[Sun Aug 12 10:22:41 2012] Off-axis axis estimate = 7.14'
[Sun Aug 12 10:26:58 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 10:26:58 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Sun Aug 12 10:26:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.798
[Sun Aug 12 10:26:58 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.00"
[Sun Aug 12 13:22:13 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src24.ximg exists
[Sun Aug 12 13:22:13 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Aug 12 13:22:13 2012] Fit fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src24 appears to have run properly
[Sun Aug 12 13:22:14 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Aug 12 13:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Aug 12 13:22:14 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Aug 12 13:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Aug 12 13:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:44:58 2012] Source 25 is offset by 9.695343 and -0.137617 pixels which is larger than
2 X fitted extent = 9.195862 x 9.195862, not incorporating fit results
[Sun Aug 12 16:44:58 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:44:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:44:58 2012] Assessing source extent using major
[Sun Aug 12 16:44:58 2012] Source does appear to be extended
[Sun Aug 12 16:44:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:45:32 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:45:32 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Sun Aug 12 16:45:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.798
[Sun Aug 12 16:45:32 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.00"
[Sun Aug 12 18:28:23 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src22.ximg exists
[Sun Aug 12 18:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src22.csv
[Sun Aug 12 18:28:23 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Aug 12 18:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src22.csv
[Sun Aug 12 18:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:28:23 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Aug 12 18:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 12 18:28:23 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Aug 12 18:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 12 18:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:11 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 89.406969 pixels away
[Sun Aug 12 21:23:11 2012] Spatial fit model total counts = 367.577000, observed total counts = 319.000000
[Sun Aug 12 21:23:11 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 21:23:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:11 2012] Assessing source extent using major
[Sun Aug 12 21:23:11 2012] Source does appear to be extended
[Sun Aug 12 21:23:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 21:23:30 2012] XMMSAS src. selection expression = ellipse(18090.954865, 29417.811646, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 21:23:30 2012] Writing source region out to fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src25_src.reg
[Sun Aug 12 21:23:30 2012] Extracting stamp from image fullrun_pn_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (171, 301) - (246, 376)
[Sun Aug 12 21:23:30 2012] XMMSAS bgd. selection expression = annulus(18090.954865, 29417.811646, 1087.500000, 2175.000000, X, Y) && !ellipse(18430.722946, 30700.058044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20332.609000, 27920.533400, 406.017816, 406.017816, 0.000000, X, Y)
[Sun Aug 12 21:23:30 2012] Writing fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src25.gif
[Sun Aug 12 21:35:28 2012] Mean detx,y = (-6711.56, -4965.16) 
[Sun Aug 12 21:35:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 21:35:51 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 21:35:51 2012] Setting source spectrum file to fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug 12 21:35:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Aug 12 21:55:03 2012] Not generating rmf since there are only 65 counts
[Sun Aug 12 21:55:03 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:25:32 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:32 2012] Error reading totcts from fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug 12 23:25:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:33 2012] Using photon index=1.80, rate=0.00667, arf fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src25.arf
[Sun Aug 12 23:25:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:33 2012] Updating source flux to 3e-14
[Sun Aug 12 23:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting