[Sun Aug 12 10:22:39 2012] Detection parameters:
  Position = (197.8, 244.9) = 13 34 35.57 -31 35 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7355.9 +/- 103.1
  Background counts = 38.9
  Rate = 0.4 +/- 0.005

[Sun Aug 12 10:22:41 2012] Off-axis axis estimate = 8.27'
[Sun Aug 12 10:26:58 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 10:26:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 10:26:58 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Sun Aug 12 10:26:58 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.050
[Sun Aug 12 10:26:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.56"
[Sun Aug 12 13:22:12 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 13:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 13:22:12 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 13:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 13:22:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:22:13 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 13:22:13 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 13:22:13 2012] Fit fullrun_pn_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 12 16:44:57 2012] Spatial fit model total counts = 7335.970000, observed total counts = 7322.000000
[Sun Aug 12 16:44:58 2012] Offset between fit and detection position for source 1 = 0.151614 pixels
[Sun Aug 12 16:44:58 2012] 7381.480000 total counts/ 1912.360000 bgd. counts: snr = 125.064090
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.151614 pixels
  Position = (197.9, 244.9) = 13 34 35.52 -31 35 57.3
  Extent = 6.5 (6.4-6.7)", rotation angle = 0
  Source counts = 5469.1 +/- 85.9
  Background counts = 1912.4
  Rate = 0.3 +/- 0.005
[Sun Aug 12 16:44:58 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:44:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:44:58 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 16:44:58 2012] Source does appear to be extended
[Sun Aug 12 16:44:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:45:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:45:32 2012] Initial guess for spatial extent in simple fitting = 6.55"
[Sun Aug 12 16:45:32 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.995
[Sun Aug 12 16:45:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.55"
[Sun Aug 12 18:28:22 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 12 18:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 18:28:22 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 12 18:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 18:28:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:28:23 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 12 18:28:23 2012] fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 12 18:28:23 2012] Fit fullrun_pn_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 12 21:23:11 2012] Warning, spatial fit 1 centroid is now closest to src. 25
[Sun Aug 12 21:23:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:11 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 21:23:11 2012] Source does appear to be extended
[Sun Aug 12 21:23:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 21:23:30 2012] Counts = 5469.120000, rescaling region sizes by 2.000000
[Sun Aug 12 21:23:30 2012] XMMSAS src. selection expression = ellipse(17170.487800, 21258.256800, 785.538023, 785.538023, 0.000000, X, Y)
[Sun Aug 12 21:23:30 2012] Writing source region out to fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 21:23:30 2012] Extracting stamp from image fullrun_pn_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (153, 200) - (243, 290)
[Sun Aug 12 21:23:30 2012] XMMSAS bgd. selection expression = annulus(17170.487800, 21258.256800, 2618.460075, 5236.920151, X, Y) && !ellipse(23174.066864, 26444.327515, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 21:23:30 2012] Writing fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 21:23:38 2012] Mean detx,y = (-10947.84, 2029.05) 
[Sun Aug 12 21:23:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 21:24:46 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 21:24:47 2012] Setting source spectrum file to fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 21:24:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 23:25:32 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:32 2012] Error reading totcts from fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 23:25:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:32 2012] Using photon index=1.80, rate=0.29, arf fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 23:25:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:32 2012] Updating source flux to 1.5e-12
[Sun Aug 12 23:28:24 2012] Reading fit data from xmm0105261501/analysis//spectral/fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug 12 23:28:24 2012] Spectral fit parameter nH value = 4.65613e+14
[Sun Aug 12 23:28:24 2012] Spectral fit parameter PhoIndex value = 2.13699
[Sun Aug 12 23:28:24 2012] Failed to get F(0.3-8.0) from xmm0105261501/analysis//spectral/fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 23:28:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:28:24 2012] Using Nh = 4.7e+14, photon index=2.14, rate=0.29, arf fullrun_pn_xmm0105261501_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 23:28:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:28:24 2012] Updating source flux to 1.2e-12