[Sun Aug 12 10:23:53 2012] Detection parameters:
  Position = (366.9, 189.1) = 13 33 37.96 -31 40 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.7 +/- 22.5
  Background counts = 81.0
  Rate = 0.01 +/- 0.001

[Sun Aug 12 10:23:55 2012] Off-axis axis estimate = 9.36'
[Sun Aug 12 14:50:23 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:50:23 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Sun Aug 12 14:50:23 2012] source mask rpix=2.6, npix_max = 37, mask sum = 26, frac = 0.697
[Sun Aug 12 14:50:23 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.11"
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src6.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src6.csv
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src6.csv
[Sun Aug 12 16:44:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Aug 12 16:44:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:45:19 2012] Warning, spatial fit 6 centroid is now closest to src. 29
[Sun Aug 12 16:45:19 2012] Source 4 is offset by -2.187451 and -0.946394 pixels which is larger than
2 X fitted extent = 1.267848 x 1.267848, not incorporating fit results
[Sun Aug 12 16:45:19 2012] Spatial fit model total counts = 1730.060000, observed total counts = 1475.000000
[Sun Aug 12 16:45:19 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 16:45:19 2012] Source 4 is offset by 1.251975 and -4.124757 pixels which is larger than
2 X fitted extent = 1.359412 x 1.359412, not incorporating fit results
[Sun Aug 12 16:45:19 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:45:19 2012] Assessing source extent using major
[Sun Aug 12 16:45:19 2012] Source does appear to be extended
[Sun Aug 12 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:45:20 2012] Source is confused with source 5
[Sun Aug 12 19:45:48 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 19:45:48 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Sun Aug 12 19:45:48 2012] source mask rpix=2.6, npix_max = 37, mask sum = 26, frac = 0.697
[Sun Aug 12 19:45:48 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.11"
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Aug 12 21:23:01 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Aug 12 21:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Aug 12 21:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Aug 12 21:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:21 2012] Warning, spatial fit 5 centroid is now closest to src. 31
[Sun Aug 12 21:23:21 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.774415 pixels away
[Sun Aug 12 21:23:21 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:21 2012] Assessing source extent using major
[Sun Aug 12 21:23:21 2012] Source does appear to be extended
[Sun Aug 12 21:23:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:39:43 2012] XMMSAS src. selection expression = ellipse(31874.613800, 16399.790146, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 22:39:43 2012] Writing source region out to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src4_src.reg
[Sun Aug 12 22:39:43 2012] Extracting stamp from image fullrun_mos2_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (329, 152) - (404, 227)
[Sun Aug 12 22:39:43 2012] XMMSAS bgd. selection expression = annulus(31874.613800, 16399.790146, 1087.500000, 2175.000000, X, Y) && !ellipse(32395.006000, 16149.598000, 1463.896042, 836.208024, 32.255000, X, Y) && !ellipse(32459.694000, 15384.066000, 977.128028, 977.128028, 0.000000, X, Y) && !ellipse(32897.704000, 15728.610000, 1897.592055, 1897.592055, 0.000000, X, Y) && !ellipse(31225.424622, 16300.176102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32410.465088, 17783.552917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31727.018066, 15437.506638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33588.756000, 15376.728400, 2051.096059, 256.660007, 215.412348, X, Y) && !ellipse(31415.527374, 15797.839249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33056.624878, 18058.705551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32442.036041, 18488.106094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.438000, 16816.804000, 3795.184109, 3795.184109, -0.000000, X, Y) && !ellipse(33883.836426, 16576.681473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33197.583038, 14793.291656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34164.544708, 15129.174103, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 22:39:43 2012] Writing fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src4.gif
[Sun Aug 12 22:41:24 2012] Mean detx,y = (-374.99, -12798.14) 
[Sun Aug 12 22:41:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:41:39 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:41:39 2012] Setting source spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 12 22:41:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Aug 12 23:10:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 23:10:44 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:25:34 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:34 2012] Error reading totcts from fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 12 23:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:34 2012] Using photon index=1.80, rate=0.01, arf fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src4.arf
[Sun Aug 12 23:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:34 2012] Updating source flux to 5.1e-13
[Sun Aug 12 23:26:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting