[Sun Aug 12 10:23:55 2012] Detection parameters:
  Position = (380.4, 182.2) = 13 33 33.36 -31 40 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.4 +/- 22.4
  Background counts = 87.6
  Rate = 0.008 +/- 0.001

[Sun Aug 12 10:23:55 2012] Off-axis axis estimate = 10.31'
[Sun Aug 12 14:50:23 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:50:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 14:50:23 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Sun Aug 12 14:50:23 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.050
[Sun Aug 12 14:50:23 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.58"
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src9.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src9.csv
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src9.csv
[Sun Aug 12 16:44:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Aug 12 16:44:39 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Aug 12 16:45:19 2012] Warning, spatial fit 9 centroid is now closest to src. 25
[Sun Aug 12 16:45:19 2012] Spatial fit model total counts = 1605.880000, observed total counts = 1599.000000
[Sun Aug 12 16:45:19 2012] Offset between fit and detection position for source 35 = 1.934045 pixels
[Sun Aug 12 16:45:19 2012] Warning, changing simple spatial fit ID from 9 to 13
[Sun Aug 12 16:45:19 2012] 1585.276000 total counts/ 1269.420000 bgd. counts: snr = 8.865158
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.934045 pixels
  Position = (378.7, 181.3) = 13 33 33.95 -31 40 33.9
  Extent = 23.7 (17.9-47.4)", rotation angle = 0
  Source counts = 315.9 +/- 39.8
  Background counts = 1269.4
  Rate = 0.01 +/- 0.002
[Sun Aug 12 16:45:19 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:45:19 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 16:45:19 2012] Source does appear to be extended
[Sun Aug 12 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:45:20 2012] Source is confused with source 5
[Sun Aug 12 19:45:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 19:45:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 19:45:48 2012] Initial guess for spatial extent in simple fitting = 23.72"
[Sun Aug 12 19:45:48 2012] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.016
[Sun Aug 12 19:45:48 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 23.72"
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src6.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src6.csv
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src6.csv
[Sun Aug 12 21:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Aug 12 21:23:02 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Aug 12 21:23:21 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Sun Aug 12 21:23:21 2012] Spatial fit model total counts = 1589.830000, observed total counts = 1235.000000
[Sun Aug 12 21:23:21 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 21:23:21 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:21 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 21:23:21 2012] Source does appear to be extended
[Sun Aug 12 21:23:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:39:43 2012] XMMSAS src. selection expression = ellipse(32897.704000, 15728.610000, 1423.194041, 1423.194041, 0.000000, X, Y)
[Sun Aug 12 22:39:43 2012] Writing source region out to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src35_src.reg
[Sun Aug 12 22:39:43 2012] Extracting stamp from image fullrun_mos2_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (297, 100) - (460, 263)
[Sun Aug 12 22:39:43 2012] XMMSAS bgd. selection expression = annulus(32897.704000, 15728.610000, 2371.990068, 4743.980137, X, Y) && !ellipse(32395.006000, 16149.598000, 1463.896042, 836.208024, 32.255000, X, Y) && !ellipse(34296.740180, 20152.044400, 409.891212, 409.891212, 0.000000, X, Y) && !ellipse(32459.694000, 15384.066000, 977.128028, 977.128028, 0.000000, X, Y) && !ellipse(31874.613800, 16399.790146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31225.424622, 16300.176102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32410.465088, 17783.552917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31727.018066, 15437.506638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33588.756000, 15376.728400, 2051.096059, 256.660007, 215.412348, X, Y) && !ellipse(31415.527374, 15797.839249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33056.624878, 18058.705551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32442.036041, 18488.106094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.438000, 16816.804000, 3795.184109, 3795.184109, -0.000000, X, Y) && !ellipse(33883.836426, 16576.681473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33197.583038, 14793.291656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34164.544708, 15129.174103, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 22:39:43 2012] Writing fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src35.gif
[Sun Aug 12 22:41:42 2012] Mean detx,y = (-941.13, -13657.52) 
[Sun Aug 12 22:41:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:42:16 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:42:16 2012] Setting source spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Aug 12 22:42:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Aug 12 23:25:34 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:34 2012] Error reading totcts from fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Aug 12 23:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:34 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src35.arf
[Sun Aug 12 23:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:34 2012] Updating source flux to 2.7e-13
[Sun Aug 12 23:26:34 2012] Flag p found in src. 35 procflags, skipping spectral fitting
[Sun Aug 12 23:26:34 2012] Flag c found in src. 35 procflags, skipping spectral fitting