[Sun Aug 12 10:23:54 2012] Detection parameters:
  Position = (356.1, 196.6) = 13 33 41.65 -31 39 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.0 +/- 15.0
  Background counts = 67.9
  Rate = 0.004 +/- 0.0007

[Sun Aug 12 10:23:55 2012] Off-axis axis estimate = 8.48'
[Sun Aug 12 14:50:23 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:50:23 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Sun Aug 12 14:50:23 2012] source mask rpix=2.5, npix_max = 34, mask sum = 32, frac = 0.917
[Sun Aug 12 14:50:23 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.67"
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src21.csv
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 12 16:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src21.csv
[Sun Aug 12 16:44:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:44:40 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 12 16:44:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 12 16:44:40 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 12 16:44:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 12 16:44:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:45:19 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.045261 pixels away
[Sun Aug 12 16:45:19 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:45:19 2012] Assessing source extent using major
[Sun Aug 12 16:45:19 2012] Source does appear to be extended
[Sun Aug 12 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 19:45:48 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 19:45:48 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Sun Aug 12 19:45:48 2012] source mask rpix=2.5, npix_max = 34, mask sum = 32, frac = 0.917
[Sun Aug 12 19:45:48 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.67"
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src18.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src18.csv
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src18.csv
[Sun Aug 12 21:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Aug 12 21:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Aug 12 21:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Aug 12 21:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:21 2012] Spatial fit model total counts = 1912.870000, observed total counts = 1860.000000
[Sun Aug 12 21:23:21 2012] Offset between fit and detection position for source 31 = 3.115433 pixels
[Sun Aug 12 21:23:21 2012] Warning, changing simple spatial fit ID from 18 to 5
[Sun Aug 12 21:23:21 2012] 1925.367000 total counts/ 535.797000 bgd. counts: snr = 60.031651
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.115433 pixels
  Position = (357.6, 193.9) = 13 33 41.16 -31 39 39.5
  Extent = 47.4" x 47.4", rotation angle = -0
  Source counts = 1389.6 +/- 43.9
  Background counts = 535.8
  Rate = 0.06 +/- 0.002
[Sun Aug 12 21:23:21 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:21 2012] Assessing source extent using major
[Sun Aug 12 21:23:21 2012] Source does appear to be extended
[Sun Aug 12 21:23:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 21:23:21 2012] Source is confused with source 29
[Sun Aug 12 22:39:44 2012] Counts = 1389.570000, rescaling region sizes by 2.000000
[Sun Aug 12 22:39:44 2012] XMMSAS src. selection expression = ellipse(31059.438000, 16816.804000, 5692.776164, 5692.776164, -0.000000, X, Y)
[Sun Aug 12 22:39:44 2012] Writing source region out to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src31_src.reg
[Sun Aug 12 22:39:44 2012] Extracting stamp from image fullrun_mos2_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (30, 0) - (595, 521)
[Sun Aug 12 22:39:44 2012] XMMSAS bgd. selection expression = annulus(31059.438000, 16816.804000, 18975.920546, 37951.841092, X, Y) && !ellipse(17182.919660, 21228.871800, 486.102414, 486.102414, 0.000000, X, Y) && !ellipse(32395.006000, 16149.598000, 1463.896042, 836.208024, 32.255000, X, Y) && !ellipse(34296.740180, 20152.044400, 409.891212, 409.891212, 0.000000, X, Y) && !ellipse(32459.694000, 15384.066000, 977.128028, 977.128028, 0.000000, X, Y) && !ellipse(31874.613800, 16399.790146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32897.704000, 15728.610000, 1897.592055, 1897.592055, 0.000000, X, Y) && !ellipse(31225.424622, 16300.176102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32410.465088, 17783.552917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31727.018066, 15437.506638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33588.756000, 15376.728400, 2051.096059, 256.660007, 215.412348, X, Y) && !ellipse(31415.527374, 15797.839249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33056.624878, 18058.705551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37115.272583, 30222.508545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33406.637390, 29073.937561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32442.036041, 18488.106094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36892.178436, 26020.112244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33883.836426, 16576.681473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33197.583038, 14793.291656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34164.544708, 15129.174103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18439.073013, 30766.314301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15791.264069, 32329.595551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.486511, 38946.881714, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 22:39:44 2012] Writing fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src31.gif
[Sun Aug 12 22:45:21 2012] Mean detx,y = (-416.09, -12198.17) 
[Sun Aug 12 22:45:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:53:45 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:53:45 2012] Setting source spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Aug 12 22:53:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Aug 12 23:25:34 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:34 2012] Error reading totcts from fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Aug 12 23:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:34 2012] Using photon index=1.80, rate=0.0625, arf fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src31.arf
[Sun Aug 12 23:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:34 2012] Updating source flux to 9.8e-13
[Sun Aug 12 23:26:34 2012] Flag c found in src. 31 procflags, skipping spectral fitting