[Sun Aug 12 10:23:54 2012] Detection parameters:
  Position = (393.3, 174.5) = 13 33 28.99 -31 41 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.9 +/- 16.4
  Background counts = 75.8
  Rate = 0.003 +/- 0.0007

[Sun Aug 12 10:23:55 2012] Off-axis axis estimate = 11.32'
[Sun Aug 12 14:50:23 2012] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:50:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 14:50:23 2012] Initial guess for spatial extent in simple fitting = 12.09"
[Sun Aug 12 14:50:23 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.140
[Sun Aug 12 14:50:23 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.09"
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src25.ximg exists
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Aug 12 16:44:39 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src25 appears to have run properly
[Sun Aug 12 16:44:40 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Aug 12 16:44:40 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Aug 12 16:44:40 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Aug 12 16:45:19 2012] Source 25 is offset by 2.601364 and 2.108047 pixels which is larger than
2 X fitted extent = 1.331503 x 1.331503, not incorporating fit results
[Sun Aug 12 16:45:19 2012] Warning, spatial fit 25 centroid is now closest to src. 37
[Sun Aug 12 16:45:19 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:45:19 2012] Assessing source extent using major
[Sun Aug 12 16:45:19 2012] Source does appear to be extended
[Sun Aug 12 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:45:20 2012] Source is confused with source 35
[Sun Aug 12 16:45:20 2012] Source is confused with source 37
[Sun Aug 12 19:45:48 2012] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 19:45:48 2012] Initial guess for spatial extent in simple fitting = 12.09"
[Sun Aug 12 19:45:48 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.140
[Sun Aug 12 19:45:48 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 12.09"
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src22.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src22.csv
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src22.csv
[Sun Aug 12 21:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Aug 12 21:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 12 21:23:02 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Aug 12 21:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 12 21:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:21 2012] Warning, spatial fit 22 centroid is now closest to src. 35
[Sun Aug 12 21:23:21 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:21 2012] Assessing source extent using major
[Sun Aug 12 21:23:21 2012] Source does appear to be extended
[Sun Aug 12 21:23:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:39:44 2012] XMMSAS src. selection expression = ellipse(34164.544708, 15129.174103, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 22:39:44 2012] Writing source region out to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src25_src.reg
[Sun Aug 12 22:39:44 2012] Extracting stamp from image fullrun_mos2_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (356, 137) - (431, 212)
[Sun Aug 12 22:39:44 2012] XMMSAS bgd. selection expression = annulus(34164.544708, 15129.174103, 1087.500000, 2175.000000, X, Y) && !ellipse(32395.006000, 16149.598000, 1463.896042, 836.208024, 32.255000, X, Y) && !ellipse(32459.694000, 15384.066000, 977.128028, 977.128028, 0.000000, X, Y) && !ellipse(31874.613800, 16399.790146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32897.704000, 15728.610000, 1897.592055, 1897.592055, 0.000000, X, Y) && !ellipse(31225.424622, 16300.176102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32410.465088, 17783.552917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31727.018066, 15437.506638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33588.756000, 15376.728400, 2051.096059, 256.660007, 215.412348, X, Y) && !ellipse(31415.527374, 15797.839249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33056.624878, 18058.705551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.438000, 16816.804000, 3795.184109, 3795.184109, -0.000000, X, Y) && !ellipse(33883.836426, 16576.681473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33197.583038, 14793.291656, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 22:39:44 2012] Writing fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src25.gif
[Sun Aug 12 22:54:22 2012] Mean detx,y = (-1838.31, -14818.73) 
[Sun Aug 12 22:54:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:54:33 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:54:33 2012] Setting source spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug 12 22:54:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Aug 12 23:24:29 2012] Not generating rmf since there are only 70 counts
[Sun Aug 12 23:24:29 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:25:34 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:34 2012] Error reading totcts from fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug 12 23:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:34 2012] Using photon index=1.80, rate=0.00318, arf fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src25.arf
[Sun Aug 12 23:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:34 2012] Updating source flux to 7.5e-14
[Sun Aug 12 23:26:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting