[Sun Aug 12 10:23:53 2012] Detection parameters:
  Position = (198.0, 244.8) = 13 34 35.51 -31 35 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2681.7 +/- 60.9
  Background counts = 13.1
  Rate = 0.1 +/- 0.003

[Sun Aug 12 10:23:55 2012] Off-axis axis estimate = 8.26'
[Sun Aug 12 14:50:23 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:50:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 14:50:23 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Sun Aug 12 14:50:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.050
[Sun Aug 12 14:50:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.56"
[Sun Aug 12 16:44:38 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 16:44:38 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 16:44:39 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 16:44:39 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 12 16:45:19 2012] Spatial fit model total counts = 2685.770000, observed total counts = 2689.000000
[Sun Aug 12 16:45:19 2012] Offset between fit and detection position for source 1 = 0.207824 pixels
[Sun Aug 12 16:45:19 2012] 2696.489000 total counts/ 666.429000 bgd. counts: snr = 78.637904
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.207824 pixels
  Position = (198.1, 244.6) = 13 34 35.48 -31 35 58.7
  Extent = 6.3 (6.1-6.5)", rotation angle = 0
  Source counts = 2030.1 +/- 51.9
  Background counts = 666.4
  Rate = 0.09 +/- 0.002
[Sun Aug 12 16:45:19 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:45:19 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 16:45:19 2012] Source does appear to be extended
[Sun Aug 12 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 19:45:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 19:45:48 2012] Initial guess for spatial extent in simple fitting = 6.32"
[Sun Aug 12 19:45:48 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.049
[Sun Aug 12 19:45:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.32"
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 12 21:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 21:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 12 21:23:01 2012] fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 12 21:23:01 2012] Fit fullrun_mos2_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 12 21:23:21 2012] Spatial fit model total counts = 2581.000000, observed total counts = 2581.000000
[Sun Aug 12 21:23:21 2012] Offset between fit and detection position for source 1 = 0.014533 pixels
[Sun Aug 12 21:23:21 2012] 2593.892000 total counts/ 620.042000 bgd. counts: snr = 79.269039
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014533 pixels
  Position = (198.1, 244.6) = 13 34 35.48 -31 35 58.7
  Extent = 6.1 (5.9-6.3)", rotation angle = 0
  Source counts = 1973.8 +/- 50.9
  Background counts = 620.0
  Rate = 0.09 +/- 0.002
[Sun Aug 12 21:23:21 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:21 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 21:23:21 2012] Source does appear to be extended
[Sun Aug 12 21:23:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:39:43 2012] Counts = 1973.850000, rescaling region sizes by 2.000000
[Sun Aug 12 22:39:43 2012] XMMSAS src. selection expression = ellipse(17182.919660, 21228.871800, 729.153621, 729.153621, 0.000000, X, Y)
[Sun Aug 12 22:39:43 2012] Writing source region out to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 22:39:43 2012] Extracting stamp from image fullrun_mos2_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (156, 203) - (240, 286)
[Sun Aug 12 22:39:43 2012] XMMSAS bgd. selection expression = annulus(17182.919660, 21228.871800, 2430.512070, 4861.024140, X, Y)
[Sun Aug 12 22:39:43 2012] Writing fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 22:39:46 2012] Mean detx,y = (11076.52, -2297.90) 
[Sun Aug 12 22:39:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:40:30 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:40:30 2012] Setting source spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 22:40:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 23:25:34 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:34 2012] Error reading totcts from fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 23:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:34 2012] Using photon index=1.80, rate=0.0888, arf fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 23:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:34 2012] Updating source flux to 1.8e-12
[Sun Aug 12 23:27:40 2012] Reading fit data from xmm0105261501/analysis//spectral/fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug 12 23:27:40 2012] Spectral fit parameter nH value = 3.66266e+14
[Sun Aug 12 23:27:40 2012] Spectral fit parameter PhoIndex value = 2.09134
[Sun Aug 12 23:27:40 2012] Failed to get F(0.3-8.0) from xmm0105261501/analysis//spectral/fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 23:27:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:27:40 2012] Using Nh = 3.7e+14, photon index=2.09, rate=0.0888, arf fullrun_mos2_xmm0105261501_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 23:27:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:27:40 2012] Updating source flux to 1.6e-12