[Sun Aug 12 10:23:17 2012] Detection parameters:
  Position = (364.9, 180.1) = 13 33 38.66 -31 40 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.3 +/- 23.4
  Background counts = 82.3
  Rate = 0.009 +/- 0.001

[Sun Aug 12 10:23:18 2012] Off-axis axis estimate = 9.84'
[Sun Aug 12 13:22:14 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 13:22:14 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Sun Aug 12 13:22:14 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.931
[Sun Aug 12 13:22:14 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.35"
[Sun Aug 12 14:50:21 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Aug 12 14:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src4.csv
[Sun Aug 12 14:50:21 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Aug 12 14:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src4.csv
[Sun Aug 12 14:50:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 14:50:22 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Aug 12 14:50:22 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Aug 12 14:50:22 2012] Fit fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Aug 12 16:45:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.070471 pixels away
[Sun Aug 12 16:45:08 2012] Spatial fit model total counts = 1344.040000, observed total counts = 1340.000000
[Sun Aug 12 16:45:08 2012] Offset between fit and detection position for source 7 = 0.215613 pixels
[Sun Aug 12 16:45:08 2012] Warning, changing simple spatial fit ID from 4 to 11
[Sun Aug 12 16:45:08 2012] 1355.670000 total counts/ 1355.670000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.215613 pixels
  Position = (365.0, 180.0) = 13 33 38.61 -31 40 39.9
  Extent = 2.7 (2.7-40.9)", rotation angle = 0
  Source counts = 0.0 +/- 36.8
  Background counts = 1355.7
  Rate = 2e-18 +/- 0.002
  Deleting source due to low Poisson probability