[Sun Aug 12 10:23:18 2012] Detection parameters:
  Position = (350.9, 195.2) = 13 33 43.43 -31 39 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.0 +/- 15.5
  Background counts = 68.8
  Rate = 0.003 +/- 0.0007

[Sun Aug 12 10:23:18 2012] Off-axis axis estimate = 8.39'
[Sun Aug 12 13:22:14 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 13:22:14 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Aug 12 13:22:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Sun Aug 12 13:22:14 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.62"
[Sun Aug 12 14:50:22 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src25.ximg exists
[Sun Aug 12 14:50:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src25.csv
[Sun Aug 12 14:50:22 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Aug 12 14:50:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src25.csv
[Sun Aug 12 14:50:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 14:50:22 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Aug 12 14:50:22 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Aug 12 14:50:22 2012] Fit fullrun_mos1_xmm0105261501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Aug 12 16:45:08 2012] Warning, spatial fit 25 centroid is now closest to src. 28
[Sun Aug 12 16:45:08 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:45:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:45:08 2012] Assessing source extent using major
[Sun Aug 12 16:45:08 2012] Source does appear to be extended
[Sun Aug 12 16:45:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:45:08 2012] Source is confused with source 28
[Sun Aug 12 18:28:24 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 18:28:24 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Aug 12 18:28:24 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Sun Aug 12 18:28:24 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.62"
[Sun Aug 12 19:45:48 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_src21.ximg exists
[Sun Aug 12 19:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_src21.csv
[Sun Aug 12 19:45:48 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Aug 12 19:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_src21.csv
[Sun Aug 12 19:45:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 19:45:48 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Aug 12 19:45:48 2012] fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Aug 12 19:45:48 2012] Fit fullrun_mos1_xmm0105261501_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Aug 12 21:23:15 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 13.085338 pixels away
[Sun Aug 12 21:23:15 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 21:23:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 21:23:16 2012] Assessing source extent using major
[Sun Aug 12 21:23:16 2012] Source does appear to be extended
[Sun Aug 12 21:23:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:03:25 2012] XMMSAS src. selection expression = ellipse(30478.333893, 16937.668549, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 22:03:25 2012] Writing source region out to fullrun_mos1_xmm0105261501_pi300-10000_pass1_cl_src26_src.reg
[Sun Aug 12 22:03:25 2012] Extracting stamp from image fullrun_mos1_xmm0105261501_pi300-10000_cl_sm2.00.img.gz, (313, 158) - (388, 233)
[Sun Aug 12 22:03:25 2012] XMMSAS bgd. selection expression = annulus(30478.333893, 16937.668549, 1087.500000, 2175.000000, X, Y) && !ellipse(32323.260000, 15777.474000, 1886.440054, 1886.440054, 0.000000, X, Y) && !ellipse(31433.249695, 16483.515167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31858.122000, 16150.208000, 3397.976098, 3397.976098, 0.000000, X, Y) && !ellipse(33002.345459, 15610.096817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31109.958000, 16872.166000, 1757.064051, 1757.064051, 0.000000, X, Y) && !ellipse(32565.274536, 15105.313354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33033.865967, 15195.620193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33147.049866, 16650.572266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32117.846344, 17439.876633, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 22:03:25 2012] Writing fullrun_mos1_xmm0105261501_pi300-10000_pass1_cl_src26.gif
[Sun Aug 12 22:18:56 2012] Mean detx,y = (-11530.32, -921.25) 
[Sun Aug 12 22:18:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:19:07 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:19:07 2012] Setting source spectrum file to fullrun_mos1_xmm0105261501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Aug 12 22:19:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105261501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Aug 12 22:39:34 2012] Not generating rmf since there are only 63 counts
[Sun Aug 12 22:39:34 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:25:33 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:25:33 2012] Error reading totcts from fullrun_mos1_xmm0105261501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Aug 12 23:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:25:34 2012] Using photon index=1.80, rate=0.00283, arf fullrun_mos1_xmm0105261501_pi300-10000_pass1_cl_src26.arf
[Sun Aug 12 23:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:25:34 2012] Updating source flux to 5.5e-14
[Sun Aug 12 23:25:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting