[Thu May 24 13:33:46 2012] Detection parameters:
  Position = (364.7, 292.3) = 13 31 29.76 -31 50 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 19.3
  Background counts = 137.5
  Rate = 0.007 +/- 0.001

[Thu May 24 13:33:46 2012] Off-axis axis estimate = 4.82'
[Thu May 24 13:36:42 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:36:42 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Thu May 24 13:36:42 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.936
[Thu May 24 13:36:42 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.84"
[Thu May 24 14:17:42 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 24 14:17:42 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 24 14:17:42 2012] Fit fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu May 24 14:17:42 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 24 14:17:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 24 14:17:42 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 24 14:17:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 24 14:17:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:35:28 2012] Spatial fit model total counts = 726.465000, observed total counts = 886.000000
[Thu May 24 15:35:28 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 15:35:28 2012] Warning, spatial fit 15 centroid is now closest to src. 14
[Thu May 24 15:35:29 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:35:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:35:29 2012] Assessing source extent using major
[Thu May 24 15:35:29 2012] Source does appear to be extended
[Thu May 24 15:35:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:35:54 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Thu May 24 15:35:54 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Thu May 24 15:35:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.936
[Thu May 24 15:35:54 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 8.84"
[Thu May 24 16:10:37 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_src14.ximg exists
[Thu May 24 16:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_src14.csv
[Thu May 24 16:10:37 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu May 24 16:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_src14.csv
[Thu May 24 16:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 16:10:37 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu May 24 16:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu May 24 16:10:37 2012] fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu May 24 16:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu May 24 16:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:13:07 2012] Spatial fit model total counts = 1019.740000, observed total counts = 760.000000
[Thu May 24 17:13:07 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 17:13:07 2012] Source 15 is offset by 5.913253 and 0.002671 pixels which is larger than
2 X fitted extent = 1.031894 x 1.031894, not incorporating fit results
[Thu May 24 17:13:07 2012] Vigneting correction estimate = 1.000000
[Thu May 24 17:13:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 17:13:07 2012] Assessing source extent using major
[Thu May 24 17:13:07 2012] Source does appear to be extended
[Thu May 24 17:13:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:13:31 2012] XMMSAS src. selection expression = ellipse(31676.753052, 25377.932343, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 17:13:31 2012] Writing source region out to fullrun_pn_xmm0105261401_pi300-10000_pass1_cl_src15_src.reg
[Thu May 24 17:13:31 2012] Extracting stamp from image fullrun_pn_xmm0105261401_pi300-10000_cl_sm2.00.img.gz, (327, 255) - (402, 330)
[Thu May 24 17:13:31 2012] XMMSAS bgd. selection expression = annulus(31676.753052, 25377.932343, 1087.500000, 2175.000000, X, Y) && !ellipse(32178.957153, 26212.418671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32529.715729, 25293.319214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31882.889526, 24569.013947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31031.750854, 23523.585541, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 17:13:31 2012] Writing fullrun_pn_xmm0105261401_pi300-10000_pass1_cl_src15.gif
[Thu May 24 17:23:10 2012] Mean detx,y = (4083.46, 4272.93) 
[Thu May 24 17:23:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 17:23:32 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 17:23:32 2012] Setting source spectrum file to fullrun_pn_xmm0105261401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 24 17:23:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu May 24 17:36:37 2012] Not generating rmf since there are only 94 counts
[Thu May 24 17:36:37 2012] rmf not generated due to insufficient counts
[Thu May 24 18:00:15 2012] Updating aperture counts using extracted products
[Thu May 24 18:00:15 2012] Error reading totcts from fullrun_pn_xmm0105261401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 24 18:00:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 18:00:16 2012] Using photon index=1.80, rate=0.00673, arf fullrun_pn_xmm0105261401_pi300-10000_pass1_cl_src15.arf
[Thu May 24 18:00:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 18:00:16 2012] Updating source flux to 2.2e-14
[Thu May 24 18:00:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting