[Thu May 24 13:34:45 2012] Detection parameters:
  Position = (256.0, 305.2) = 13 32 6.84 -31 49 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.6 +/- 17.1
  Background counts = 37.3
  Rate = 0.008 +/- 0.0009

[Thu May 24 13:34:45 2012] Off-axis axis estimate = 3.11'
[Thu May 24 14:54:28 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu May 24 14:54:28 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Thu May 24 14:54:28 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Thu May 24 14:54:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.99"
[Thu May 24 15:35:18 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 15:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_src1.csv
[Thu May 24 15:35:18 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 15:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_src1.csv
[Thu May 24 15:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:35:18 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 15:35:18 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 15:35:19 2012] Fit fullrun_mos2_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 15:35:41 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.949592 pixels away
[Thu May 24 15:35:41 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:35:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:35:41 2012] Assessing source extent using major
[Thu May 24 15:35:41 2012] Source does appear to be extended
[Thu May 24 15:35:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 16:39:11 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu May 24 16:39:11 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Thu May 24 16:39:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Thu May 24 16:39:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.99"
[Thu May 24 17:12:59 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 17:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_src1.csv
[Thu May 24 17:12:59 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 17:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_src1.csv
[Thu May 24 17:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:12:59 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 17:12:59 2012] fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 17:12:59 2012] Fit fullrun_mos2_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 17:13:18 2012] Spatial fit model total counts = 342.000000, observed total counts = 342.000000
[Thu May 24 17:13:18 2012] Offset between fit and detection position for source 15 = 0.193602 pixels
[Thu May 24 17:13:18 2012] 343.266700 total counts/ 266.122000 bgd. counts: snr = 4.728961
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.193602 pixels
  Position = (255.9, 305.3) = 13 32 6.89 -31 49 9.1
  Extent = 3.6 (2.8-4.9)", rotation angle = 0
  Source counts = 77.1 +/- 18.5
  Background counts = 266.1
  Rate = 0.004 +/- 0.0009
[Thu May 24 17:13:18 2012] Vigneting correction estimate = 1.000000
[Thu May 24 17:13:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 17:13:18 2012] Assessing source extent using major axis lower bound
[Thu May 24 17:13:18 2012] Source does appear to be extended
[Thu May 24 17:13:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:50:48 2012] XMMSAS src. selection expression = ellipse(22213.723660, 26515.456200, 214.294206, 214.294206, 0.000000, X, Y)
[Thu May 24 17:50:48 2012] Writing source region out to fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15_src.reg
[Thu May 24 17:50:48 2012] Extracting stamp from image fullrun_mos2_xmm0105261401_pi300-10000_cl_sm2.00.img.gz, (244, 293) - (268, 318)
[Thu May 24 17:50:48 2012] XMMSAS bgd. selection expression = annulus(22213.723660, 26515.456200, 357.157010, 714.314021, X, Y)
[Thu May 24 17:50:48 2012] Writing fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15.gif
[Thu May 24 17:50:52 2012] Mean detx,y = (4367.94, 384.89) 
[Thu May 24 17:50:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 17:51:03 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 17:51:03 2012] Setting source spectrum file to fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 24 17:51:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu May 24 17:57:43 2012] Not generating rmf since there are only 77 counts
[Thu May 24 17:57:43 2012] rmf not generated due to insufficient counts
[Thu May 24 18:00:18 2012] Updating aperture counts using extracted products
[Thu May 24 18:00:18 2012] Error reading totcts from fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 24 18:00:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 18:00:19 2012] Using photon index=1.80, rate=0.00376, arf fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15.arf
[Thu May 24 18:00:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 18:00:20 2012] Updating source flux to 7.2e-14
[Thu May 24 18:00:43 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 24 18:00:44 2012] xmm0105261401/analysis//spectral/fullrun_mos2_xmm0105261401_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete