[Thu May 24 13:34:19 2012] Detection parameters:
  Position = (361.5, 285.9) = 13 31 30.85 -31 50 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 14.5
  Background counts = 50.7
  Rate = 0.004 +/- 0.0008

[Thu May 24 13:34:19 2012] Off-axis axis estimate = 4.66'
[Thu May 24 14:17:43 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Thu May 24 14:17:43 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Thu May 24 14:17:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Thu May 24 14:17:43 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.76"
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 24 14:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src15.csv
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 24 14:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src15.csv
[Thu May 24 14:54:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 24 14:54:28 2012] Fit fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu May 24 15:35:35 2012] Source 21 is offset by -5.904790 and 3.589874 pixels which is larger than
2 X fitted extent = 1.006625 x 1.006625, not incorporating fit results
[Thu May 24 15:35:35 2012] Spatial fit model total counts = 536.994000, observed total counts = 537.000000
[Thu May 24 15:35:35 2012] Offset between fit and detection position for source 21 = 1.374332 pixels
[Thu May 24 15:35:35 2012] Warning, changing simple spatial fit ID from 15 to 21
[Thu May 24 15:35:35 2012] 536.629700 total counts/ 485.405000 bgd. counts: snr = 2.325023
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.374332 pixels
  Position = (360.1, 286.2) = 13 31 31.31 -31 50 32.1
  Extent = 8.4 (2.3-14.5)", rotation angle = 0
  Source counts = 51.2 +/- 23.2
  Background counts = 485.4
  Rate = 0.003 +/- 0.001
[Thu May 24 15:35:35 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:35:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:35:35 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:35:35 2012] Source does appear to be extended
[Thu May 24 15:35:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:35:35 2012] Source is confused with source 20
[Thu May 24 16:10:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 16:10:37 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Thu May 24 16:10:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Thu May 24 16:10:37 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.44"
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src13.ximg exists
[Thu May 24 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src13.csv
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu May 24 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src13.csv
[Thu May 24 16:39:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May 24 16:39:11 2012] Fit fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu May 24 17:13:12 2012] Spatial fit model total counts = 590.882000, observed total counts = 585.000000
[Thu May 24 17:13:12 2012] Offset between fit and detection position for source 21 = 0.645188 pixels
[Thu May 24 17:13:12 2012] 602.531400 total counts/ 546.405000 bgd. counts: snr = 2.401098
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.645188 pixels
  Position = (360.8, 286.3) = 13 31 31.09 -31 50 31.9
  Extent = 9.3 (2.7-16.9)", rotation angle = 0
  Source counts = 56.1 +/- 24.5
  Background counts = 546.4
  Rate = 0.003 +/- 0.001
[Thu May 24 17:13:12 2012] Vigneting correction estimate = 1.000000
[Thu May 24 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 17:13:12 2012] Assessing source extent using major axis lower bound
[Thu May 24 17:13:12 2012] Source does appear to be extended
[Thu May 24 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:40:33 2012] XMMSAS src. selection expression = ellipse(31337.808000, 24857.450000, 559.044016, 559.044016, 0.000000, X, Y)
[Thu May 24 17:40:33 2012] Writing source region out to fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src21_src.reg
[Thu May 24 17:40:33 2012] Extracting stamp from image fullrun_mos1_xmm0105261401_pi300-10000_cl_sm2.00.img.gz, (329, 254) - (393, 318)
[Thu May 24 17:40:33 2012] XMMSAS bgd. selection expression = annulus(31337.808000, 24857.450000, 931.740027, 1863.480054, X, Y) && !ellipse(32247.058340, 26387.348860, 347.993610, 347.993610, 0.000000, X, Y) && !ellipse(30850.061890, 25053.750610, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 17:40:33 2012] Writing fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src21.gif
[Thu May 24 17:43:15 2012] Mean detx,y = (-4527.51, 3210.03) 
[Thu May 24 17:43:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 17:43:31 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 17:43:31 2012] Setting source spectrum file to fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu May 24 17:43:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu May 24 17:50:12 2012] Not generating rmf since there are only 56 counts
[Thu May 24 17:50:12 2012] rmf not generated due to insufficient counts
[Thu May 24 18:00:17 2012] Updating aperture counts using extracted products
[Thu May 24 18:00:17 2012] Error reading totcts from fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu May 24 18:00:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 18:00:18 2012] Using photon index=1.80, rate=0.00276, arf fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src21.arf
[Thu May 24 18:00:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 18:00:18 2012] Updating source flux to 3.5e-14
[Thu May 24 18:00:22 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Thu May 24 18:00:22 2012] Flag c found in src. 21 procflags, skipping spectral fitting
[Thu May 24 18:00:22 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting