[Thu May 24 13:34:18 2012] Detection parameters:
  Position = (259.8, 412.1) = 13 32 5.53 -31 41 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 12.5
  Background counts = 31.3
  Rate = 0.004 +/- 0.0009

[Thu May 24 13:34:19 2012] Off-axis axis estimate = 8.71'
[Thu May 24 14:17:43 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Thu May 24 14:17:43 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Thu May 24 14:17:43 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Thu May 24 14:17:43 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.78"
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 24 14:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src11.csv
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 24 14:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src11.csv
[Thu May 24 14:54:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 24 14:54:28 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 24 14:54:28 2012] Fit fullrun_mos1_xmm0105261401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 24 15:35:35 2012] Warning, spatial fit 11 centroid is now closest to src. 8
[Thu May 24 15:35:35 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:35:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:35:35 2012] Assessing source extent using major
[Thu May 24 15:35:35 2012] Source does appear to be extended
[Thu May 24 15:35:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 16:10:37 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Thu May 24 16:10:37 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Thu May 24 16:10:37 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Thu May 24 16:10:37 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.78"
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 24 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src10.csv
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 24 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src10.csv
[Thu May 24 16:39:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 24 16:39:11 2012] fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 24 16:39:11 2012] Fit fullrun_mos1_xmm0105261401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 24 17:13:12 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.443403 pixels away
[Thu May 24 17:13:12 2012] Vigneting correction estimate = 1.000000
[Thu May 24 17:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 17:13:12 2012] Assessing source extent using major
[Thu May 24 17:13:12 2012] Source does appear to be extended
[Thu May 24 17:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:40:33 2012] XMMSAS src. selection expression = ellipse(22554.653839, 35807.463562, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 17:40:33 2012] Writing source region out to fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src10_src.reg
[Thu May 24 17:40:33 2012] Extracting stamp from image fullrun_mos1_xmm0105261401_pi300-10000_cl_sm2.00.img.gz, (222, 375) - (297, 450)
[Thu May 24 17:40:33 2012] XMMSAS bgd. selection expression = annulus(22554.653839, 35807.463562, 1087.500000, 2175.000000, X, Y)
[Thu May 24 17:40:33 2012] Writing fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src10.gif
[Thu May 24 17:42:56 2012] Mean detx,y = (8980.11, -485.69) 
[Thu May 24 17:42:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 17:43:09 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 17:43:10 2012] Setting source spectrum file to fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 24 17:43:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 24 17:50:07 2012] Not generating rmf since there are only 62 counts
[Thu May 24 17:50:07 2012] rmf not generated due to insufficient counts
[Thu May 24 18:00:17 2012] Updating aperture counts using extracted products
[Thu May 24 18:00:17 2012] Error reading totcts from fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 24 18:00:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 18:00:18 2012] Using photon index=1.80, rate=0.00435, arf fullrun_mos1_xmm0105261401_pi300-10000_pass1_cl_src10.arf
[Thu May 24 18:00:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 18:00:18 2012] Updating source flux to 6.7e-14
[Thu May 24 18:00:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting