[Mon Aug 13 03:22:25 2012] Detection parameters:
  Position = (430.0, 299.0) = 4 31 12.26 -61 27 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 399.8 +/- 30.5
  Background counts = 101.9
  Rate = 0.04 +/- 0.003

[Mon Aug 13 03:22:25 2012] Off-axis axis estimate = 9.54'
[Mon Aug 13 03:24:30 2012] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 03:24:30 2012] Initial guess for spatial extent in simple fitting = 11.20"
[Mon Aug 13 03:24:30 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Mon Aug 13 03:24:30 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.20"
[Mon Aug 13 05:14:24 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Aug 13 05:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src4.csv
[Mon Aug 13 05:14:24 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Aug 13 05:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src4.csv
[Mon Aug 13 05:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Aug 13 05:14:25 2012] Fit fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Aug 13 07:57:00 2012] Warning, spatial fit 4 centroid is now closest to src. 5
[Mon Aug 13 07:57:00 2012] Spatial fit model total counts = 2868.730000, observed total counts = 2632.000000
[Mon Aug 13 07:57:00 2012] Offset between fit and detection position for source 4 = 1.343021 pixels
[Mon Aug 13 07:57:00 2012] Warning, changing simple spatial fit ID from 4 to 5
[Mon Aug 13 07:57:00 2012] 2795.580000 total counts/ 2178.560000 bgd. counts: snr = 13.219483
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.343021 pixels
  Position = (428.7, 298.7) = 4 31 13.05 -61 27 20.7
  Extent = 22.0 (22.0-44.1)", rotation angle = 0
  Source counts = 617.0 +/- 52.9
  Background counts = 2178.6
  Rate = 0.07 +/- 0.006
[Mon Aug 13 07:57:00 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 07:57:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 07:57:00 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 07:57:00 2012] Source does appear to be extended
[Mon Aug 13 07:57:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 07:57:00 2012] Source is confused with source 5
[Mon Aug 13 07:57:00 2012] Source is confused with source 14
[Mon Aug 13 07:57:00 2012] Source is confused with source 18
[Mon Aug 13 07:57:00 2012] Source is confused with source 20
[Mon Aug 13 07:57:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 07:57:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 07:57:19 2012] Initial guess for spatial extent in simple fitting = 22.03"
[Mon Aug 13 07:57:19 2012] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.977
[Mon Aug 13 07:57:19 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 22.03"
[Mon Aug 13 09:28:20 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Aug 13 09:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src4.csv
[Mon Aug 13 09:28:20 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Aug 13 09:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src4.csv
[Mon Aug 13 09:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 09:28:20 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Aug 13 09:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Aug 13 09:28:20 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Aug 13 09:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Aug 13 09:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 12:51:26 2012] Warning, spatial fit 4 centroid is now closest to src. 14
[Mon Aug 13 12:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 12:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 12:51:26 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 12:51:26 2012] Source does appear to be extended
[Mon Aug 13 12:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 12:51:57 2012] XMMSAS src. selection expression = ellipse(37245.328000, 25939.046000, 1321.656038, 1321.656038, 0.000000, X, Y)
[Mon Aug 13 12:51:57 2012] Writing source region out to fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src4_src.reg
[Mon Aug 13 12:51:57 2012] Extracting stamp from image fullrun_pn_xmm0105261101_pi300-10000_cl_sm2.00.img.gz, (353, 223) - (505, 375)
[Mon Aug 13 12:51:57 2012] XMMSAS bgd. selection expression = annulus(37245.328000, 25939.046000, 2202.760063, 4405.520127, X, Y) && !ellipse(37090.166000, 26097.395800, 1411.168041, 1411.168041, 0.000000, X, Y) && !ellipse(36289.967346, 29068.619537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35984.466400, 28048.382050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36683.118774, 27467.602356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36161.947144, 27293.283752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.789720, 27073.274000, 1399.408040, 1399.408040, 0.000000, X, Y) && !ellipse(37189.812531, 26806.112427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35883.976196, 26251.795410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34861.152710, 25964.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37481.085175, 25524.821838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36447.997345, 24562.987030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37309.132202, 24834.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32574.318000, 31130.670000, 1576.480045, 611.084818, -0.000000, X, Y) && !ellipse(35632.757324, 28555.144836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34578.835480, 27721.731140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34472.870605, 27105.695312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35307.917145, 25184.885162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35054.944000, 24526.468000, 1123.696032, 1123.696032, 0.000000, X, Y)
[Mon Aug 13 12:51:57 2012] Writing fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src4.gif
[Mon Aug 13 12:56:45 2012] Mean detx,y = (-11635.46, -2367.32) 
[Mon Aug 13 12:56:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 12:59:00 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 12:59:01 2012] Setting source spectrum file to fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Aug 13 12:59:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Aug 13 15:55:53 2012] Updating aperture counts using extracted products
[Mon Aug 13 15:55:53 2012] Error reading totcts from fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Aug 13 15:55:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 15:55:55 2012] Using photon index=1.80, rate=0.0668, arf fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src4.arf
[Mon Aug 13 15:55:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 15:55:55 2012] Updating source flux to 3.5e-13
[Mon Aug 13 16:00:55 2012] Flag c found in src. 4 procflags, skipping spectral fitting