[Mon Aug 13 03:22:25 2012] Detection parameters:
  Position = (435.8, 309.7) = 4 31 8.73 -61 26 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.9 +/- 17.0
  Background counts = 99.9
  Rate = 0.008 +/- 0.002

[Mon Aug 13 03:22:25 2012] Off-axis axis estimate = 10.00'
[Mon Aug 13 03:24:30 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 03:24:30 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Mon Aug 13 03:24:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.895
[Mon Aug 13 03:24:30 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.43"
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src26.ximg exists
[Mon Aug 13 05:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src26.csv
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Aug 13 05:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src26.csv
[Mon Aug 13 05:14:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 05:14:26 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Aug 13 05:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Aug 13 05:14:26 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Aug 13 05:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Aug 13 05:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 07:57:00 2012] Source 28 is offset by -2.330418 and 0.040071 pixels which is larger than
2 X fitted extent = 1.519913 x 1.519913, not incorporating fit results
[Mon Aug 13 07:57:00 2012] Spatial fit model total counts = 2458.360000, observed total counts = 2453.000000
[Mon Aug 13 07:57:00 2012] Offset between fit and detection position for source 28 = 7.027233 pixels
[Mon Aug 13 07:57:00 2012] Warning, changing simple spatial fit ID from 26 to 18
[Mon Aug 13 07:57:00 2012] 2332.810014 total counts/ 2332.810000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 7.027233 pixels
  Position = (441.3, 305.3) = 4 31 5.38 -61 26 51.5
  Extent = 22.5 (2.8-42.2)", rotation angle = 0
  Source counts = 0.0 +/- 48.3
  Background counts = 2332.8
  Rate = 2e-09 +/- 0.005
  Deleting source due to low Poisson probability