[Mon Aug 13 03:22:25 2012] Detection parameters:
  Position = (429.4, 286.0) = 4 31 12.57 -61 28 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.6 +/- 24.2
  Background counts = 90.0
  Rate = 0.02 +/- 0.002

[Mon Aug 13 03:22:25 2012] Off-axis axis estimate = 9.54'
[Mon Aug 13 03:24:30 2012] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 03:24:30 2012] Initial guess for spatial extent in simple fitting = 11.20"
[Mon Aug 13 03:24:30 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Mon Aug 13 03:24:30 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.20"
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src20.ximg exists
[Mon Aug 13 05:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src20.csv
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Aug 13 05:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src20.csv
[Mon Aug 13 05:14:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Aug 13 05:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Aug 13 05:14:25 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Aug 13 05:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Aug 13 05:14:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 07:57:00 2012] Warning, spatial fit 20 centroid is now closest to src. 18
[Mon Aug 13 07:57:00 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 07:57:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 07:57:00 2012] Assessing source extent using major
[Mon Aug 13 07:57:00 2012] Source does appear to be extended
[Mon Aug 13 07:57:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 07:57:00 2012] Source is confused with source 4
[Mon Aug 13 07:57:19 2012] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 07:57:19 2012] Initial guess for spatial extent in simple fitting = 11.20"
[Mon Aug 13 07:57:19 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Mon Aug 13 07:57:19 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.20"
[Mon Aug 13 09:28:20 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Aug 13 09:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src18.csv
[Mon Aug 13 09:28:20 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Aug 13 09:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src18.csv
[Mon Aug 13 09:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 09:28:21 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Aug 13 09:28:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Aug 13 09:28:21 2012] fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Aug 13 09:28:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Aug 13 09:28:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 12:51:26 2012] Source 20 is offset by 6.253772 and -4.569162 pixels which is larger than
2 X fitted extent = 1.247490 x 1.247490, not incorporating fit results
[Mon Aug 13 12:51:26 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.590832 pixels away
[Mon Aug 13 12:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 12:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 12:51:26 2012] Assessing source extent using major
[Mon Aug 13 12:51:26 2012] Source does appear to be extended
[Mon Aug 13 12:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 12:51:57 2012] XMMSAS src. selection expression = ellipse(37309.132202, 24834.970886, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 12:51:57 2012] Writing source region out to fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src20_src.reg
[Mon Aug 13 12:51:57 2012] Extracting stamp from image fullrun_pn_xmm0105261101_pi300-10000_cl_sm2.00.img.gz, (392, 249) - (467, 324)
[Mon Aug 13 12:51:57 2012] XMMSAS bgd. selection expression = annulus(37309.132202, 24834.970886, 1087.500000, 2175.000000, X, Y) && !ellipse(37245.328000, 25939.046000, 1762.208051, 1762.208051, 0.000000, X, Y) && !ellipse(37090.166000, 26097.395800, 1411.168041, 1411.168041, 0.000000, X, Y) && !ellipse(36683.118774, 27467.602356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36161.947144, 27293.283752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.789720, 27073.274000, 1399.408040, 1399.408040, 0.000000, X, Y) && !ellipse(37189.812531, 26806.112427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35883.976196, 26251.795410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34861.152710, 25964.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37481.085175, 25524.821838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36447.997345, 24562.987030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34578.835480, 27721.731140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34472.870605, 27105.695312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35307.917145, 25184.885162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35054.944000, 24526.468000, 1123.696032, 1123.696032, 0.000000, X, Y)
[Mon Aug 13 12:51:57 2012] Writing fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src20.gif
[Mon Aug 13 13:08:18 2012] Mean detx,y = (-11431.62, -3380.10) 
[Mon Aug 13 13:08:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 13:08:57 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 13:08:57 2012] Setting source spectrum file to fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Aug 13 13:08:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Aug 13 13:36:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 13:36:32 2012] rmf not generated due to insufficient counts
[Mon Aug 13 15:55:54 2012] Updating aperture counts using extracted products
[Mon Aug 13 15:55:54 2012] Error reading totcts from fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Aug 13 15:55:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 15:55:55 2012] Using photon index=1.80, rate=0.0216, arf fullrun_pn_xmm0105261101_pi300-10000_pass1_cl_src20.arf
[Mon Aug 13 15:55:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 15:55:55 2012] Updating source flux to 1.3e-13
[Mon Aug 13 16:00:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting