[Mon Aug 13 03:23:15 2012] Detection parameters:
  Position = (140.3, 158.5) = 4 34 8.59 -61 37 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.3 +/- 7.3
  Background counts = 4.5
  Rate = 0.002 +/- 0.0005

[Mon Aug 13 03:23:15 2012] Off-axis axis estimate = 15.31'
[Mon Aug 13 06:35:03 2012] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 06:35:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 06:35:03 2012] Initial guess for spatial extent in simple fitting = 14.08"
[Mon Aug 13 06:35:03 2012] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.823
[Mon Aug 13 06:35:03 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 14.08"
[Mon Aug 13 07:56:51 2012] fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_src31.ximg exists
[Mon Aug 13 07:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_src31.csv
[Mon Aug 13 07:56:51 2012] fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Aug 13 07:56:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_src31.csv
[Mon Aug 13 07:56:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 07:56:52 2012] fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Aug 13 07:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Aug 13 07:56:52 2012] fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Aug 13 07:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Aug 13 07:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 07:57:10 2012] Spatial fit model total counts = 101.307000, observed total counts = 71.000000
[Mon Aug 13 07:57:10 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 13 07:57:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 07:57:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 07:57:10 2012] Assessing source extent using major
[Mon Aug 13 07:57:10 2012] Source does appear to be extended
[Mon Aug 13 07:57:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 07:57:10 2012] Deleting source due to low Poisson probability 0.9