[Mon Aug 13 03:22:49 2012] Detection parameters:
  Position = (411.2, 314.7) = 4 31 23.68 -61 26 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.7 +/- 16.1
  Background counts = 66.3
  Rate = 0.006 +/- 0.001

[Mon Aug 13 03:22:50 2012] Off-axis axis estimate = 8.26'
[Mon Aug 13 05:14:26 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 05:14:26 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Mon Aug 13 05:14:26 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.050
[Mon Aug 13 05:14:26 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.56"
[Mon Aug 13 06:35:02 2012] fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Aug 13 06:35:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_src17.csv
[Mon Aug 13 06:35:02 2012] fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Aug 13 06:35:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_src17.csv
[Mon Aug 13 06:35:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 06:35:03 2012] fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Aug 13 06:35:03 2012] fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Aug 13 06:35:03 2012] Fit fullrun_mos1_xmm0105261101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Aug 13 07:57:05 2012] Spatial fit model total counts = 1079.330000, observed total counts = 1024.000000
[Mon Aug 13 07:57:05 2012] Offset between fit and detection position for source 10 = 0.543696 pixels
[Mon Aug 13 07:57:05 2012] 1024.638500 total counts/ 999.809000 bgd. counts: snr = 0.785253
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.543696 pixels
  Position = (410.8, 314.4) = 4 31 23.94 -61 26 12.8
  Extent = 3.7 (2.6-6.3)", rotation angle = 0
  Source counts = 24.8 +/- 32.0
  Background counts = 999.8
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability