[Sun Jul 15 10:21:24 2012] Detection parameters:
  Position = (181.4, 343.6) = 4 31 31.46 -61 25 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.7 +/- 29.9
  Background counts = 384.7
  Rate = 0.01 +/- 0.003

[Sun Jul 15 10:21:24 2012] Off-axis axis estimate = 9.09'
[Sun Jul 15 10:26:45 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 10:26:45 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Jul 15 10:26:45 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.930
[Sun Jul 15 10:26:45 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.97"
[Sun Jul 15 12:15:01 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jul 15 12:15:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src25.csv
[Sun Jul 15 12:15:01 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jul 15 12:15:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src25.csv
[Sun Jul 15 12:15:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:15:02 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jul 15 12:15:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jul 15 12:15:02 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jul 15 12:15:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jul 15 12:15:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:53:23 2012] Source 32 is offset by 0.093777 and -5.484806 pixels which is larger than
2 X fitted extent = 1.251053 x 1.251053, not incorporating fit results
[Sun Jul 15 16:53:23 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.246039 pixels away
[Sun Jul 15 16:53:23 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:53:23 2012] Assessing source extent using major
[Sun Jul 15 16:53:23 2012] Source does appear to be extended
[Sun Jul 15 16:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:53:23 2012] Source is confused with source 31
[Sun Jul 15 16:53:53 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 16:53:53 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Jul 15 16:53:53 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.930
[Sun Jul 15 16:53:53 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 10.97"
[Sun Jul 15 18:14:31 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jul 15 18:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src25.csv
[Sun Jul 15 18:14:31 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jul 15 18:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src25.csv
[Sun Jul 15 18:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 18:14:32 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jul 15 18:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jul 15 18:14:32 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jul 15 18:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jul 15 18:14:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:15:54 2012] Source 32 is offset by -2.128278 and 4.893470 pixels which is larger than
2 X fitted extent = 1.232212 x 1.232212, not incorporating fit results
[Sun Jul 15 23:15:54 2012] Source 32 is offset by 4.385800 and 0.880934 pixels which is larger than
2 X fitted extent = 2.900331 x 2.900331, not incorporating fit results
[Sun Jul 15 23:15:54 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:15:54 2012] Assessing source extent using major
[Sun Jul 15 23:15:54 2012] Source does appear to be extended
[Sun Jul 15 23:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:16:21 2012] XMMSAS src. selection expression = ellipse(15737.300598, 29840.741882, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 23:16:21 2012] Writing source region out to fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src32_src.reg
[Sun Jul 15 23:16:21 2012] Extracting stamp from image fullrun_pn_xmm0105260901_pi300-10000_cl_sm2.00.img.gz, (144, 306) - (219, 381)
[Sun Jul 15 23:16:21 2012] XMMSAS bgd. selection expression = annulus(15737.300598, 29840.741882, 1087.500000, 2175.000000, X, Y) && !ellipse(17394.998672, 31185.275269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17375.809448, 29968.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16599.867844, 29692.880646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17698.440643, 29262.821655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18607.829330, 29176.328766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17189.418000, 28776.790000, 1605.088046, 1605.088046, 0.000000, X, Y) && !ellipse(15947.410324, 28509.151764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16612.412000, 28815.364400, 832.936024, 832.936024, 0.000000, X, Y) && !ellipse(18219.269775, 27707.723206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18556.864716, 26923.799255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17181.574142, 30576.269958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16956.205963, 31994.538818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16556.833801, 31088.879120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15243.756000, 31482.398000, 3397.456098, 3397.456098, 0.000000, X, Y) && !ellipse(18001.869339, 30813.507446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16183.906000, 30362.668000, 1698.728049, 1698.728049, 0.000000, X, Y)
[Sun Jul 15 23:16:21 2012] Writing fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src32.gif
[Mon Jul 16 00:01:04 2012] Mean detx,y = (7068.06, 8616.98) 
[Mon Jul 16 00:01:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 00:01:22 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 00:01:23 2012] Setting source spectrum file to fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Jul 16 00:01:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Jul 16 01:08:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 01:08:03 2012] rmf not generated due to insufficient counts
[Mon Jul 16 03:53:09 2012] Updating aperture counts using extracted products
[Mon Jul 16 03:53:09 2012] Error reading totcts from fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Jul 16 03:53:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 03:53:10 2012] Using photon index=1.80, rate=0.0135, arf fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src32.arf
[Mon Jul 16 03:53:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 03:53:10 2012] Updating source flux to 6.6e-14
[Mon Jul 16 03:57:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting