[Sun Jul 15 10:21:23 2012] Detection parameters:
  Position = (184.3, 358.2) = 4 31 29.68 -61 24 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.1 +/- 29.7
  Background counts = 375.2
  Rate = 0.01 +/- 0.003

[Sun Jul 15 10:21:24 2012] Off-axis axis estimate = 9.34'
[Sun Jul 15 10:26:45 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 10:26:45 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Sun Jul 15 10:26:45 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Sun Jul 15 10:26:45 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.10"
[Sun Jul 15 12:15:01 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jul 15 12:15:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src23.csv
[Sun Jul 15 12:15:01 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jul 15 12:15:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src23.csv
[Sun Jul 15 12:15:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:15:02 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jul 15 12:15:02 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jul 15 12:15:02 2012] Fit fullrun_pn_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jul 15 16:53:23 2012] Spatial fit model total counts = 4695.800000, observed total counts = 3241.000000
[Sun Jul 15 16:53:23 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 16:53:23 2012] Warning, spatial fit 23 centroid is now closest to src. 23
[Sun Jul 15 16:53:23 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:53:23 2012] Assessing source extent using major
[Sun Jul 15 16:53:23 2012] Source does appear to be extended
[Sun Jul 15 16:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:53:23 2012] Source is confused with source 28
[Sun Jul 15 16:53:53 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 16:53:53 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Sun Jul 15 16:53:53 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Sun Jul 15 16:53:53 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 11.10"
[Sun Jul 15 18:14:31 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jul 15 18:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src23.csv
[Sun Jul 15 18:14:31 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jul 15 18:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src23.csv
[Sun Jul 15 18:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 18:14:32 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jul 15 18:14:32 2012] fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jul 15 18:14:32 2012] Fit fullrun_pn_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Jul 15 23:15:54 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.198012 pixels away
[Sun Jul 15 23:15:54 2012] Spatial fit model total counts = 16906.600000, observed total counts = 15839.000000
[Sun Jul 15 23:15:54 2012] Offset between fit and detection position for source 29 = 9.532628 pixels
[Sun Jul 15 23:15:54 2012] Warning, changing simple spatial fit ID from 23 to 24
[Sun Jul 15 23:15:54 2012] 16847.870000 total counts/ 14953.900000 bgd. counts: snr = 15.488019
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 9.532628 pixels
  Position = (175.8, 362.4) = 4 31 34.85 -61 24 13.5
  Extent = 42.5 (42.4-84.9)", rotation angle = 0
  Source counts = 1894.0 +/- 129.8
  Background counts = 14953.9
  Rate = 0.09 +/- 0.006
[Sun Jul 15 23:15:54 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:15:54 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 23:15:54 2012] Source does appear to be extended
[Sun Jul 15 23:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:16:20 2012] Counts = 1893.970000, rescaling region sizes by 2.000000
[Sun Jul 15 23:16:20 2012] XMMSAS src. selection expression = ellipse(15243.756000, 31482.398000, 5096.184147, 5096.184147, 0.000000, X, Y)
[Sun Jul 15 23:16:20 2012] Writing source region out to fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src29_src.reg
[Sun Jul 15 23:16:20 2012] Extracting stamp from image fullrun_pn_xmm0105260901_pi300-10000_cl_sm2.00.img.gz, (0, 70) - (469, 595)
[Sun Jul 15 23:16:20 2012] XMMSAS bgd. selection expression = annulus(15243.756000, 31482.398000, 16987.280489, 33974.560978, X, Y) && !ellipse(25711.313751, 22241.301971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37018.093201, 17961.698746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11776.951370, 27253.434418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17394.998672, 31185.275269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17375.809448, 29968.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16599.867844, 29692.880646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17698.440643, 29262.821655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18607.829330, 29176.328766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18794.829681, 28503.422211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17189.418000, 28776.790000, 1605.088046, 1605.088046, 0.000000, X, Y) && !ellipse(15947.410324, 28509.151764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16612.412000, 28815.364400, 832.936024, 832.936024, 0.000000, X, Y) && !ellipse(18992.289520, 28144.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18219.269775, 27707.723206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19127.613708, 27719.854034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18556.864716, 26923.799255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41151.374080, 20637.932200, 830.024024, 830.024024, 0.000000, X, Y) && !ellipse(19131.240479, 16503.247345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32866.399331, 14599.827745, 498.437002, 253.712047, 320.249439, X, Y) && !ellipse(39964.043120, 33541.548400, 1020.552029, 389.462411, 59.124856, X, Y) && !ellipse(17181.574142, 30576.269958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.168243, 28770.749146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30417.576202, 11273.934830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31840.589600, 39891.660614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16956.205963, 31994.538818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16556.833801, 31088.879120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18001.869339, 30813.507446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16183.906000, 30362.668000, 1698.728049, 1698.728049, 0.000000, X, Y) && !ellipse(15737.300598, 29840.741882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17839.799713, 25649.520599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31278.081818, 20238.925339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21349.131149, 11521.489761, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 23:16:20 2012] Writing fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src29.gif
[Sun Jul 15 23:47:12 2012] Mean detx,y = (6553.27, 8914.92) 
[Sun Jul 15 23:47:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 23:59:12 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 23:59:12 2012] Setting source spectrum file to fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jul 15 23:59:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jul 16 03:53:09 2012] Updating aperture counts using extracted products
[Mon Jul 16 03:53:09 2012] Error reading totcts from fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 16 03:53:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 03:53:10 2012] Using photon index=1.80, rate=0.0919, arf fullrun_pn_xmm0105260901_pi300-10000_pass1_cl_src29.arf
[Mon Jul 16 03:53:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 03:53:10 2012] Updating source flux to 7.4e-13
[Mon Jul 16 03:57:56 2012] Flag p found in src. 29 procflags, skipping spectral fitting
[Mon Jul 16 03:57:56 2012] Flag c found in src. 29 procflags, skipping spectral fitting