[Sun Jul 15 10:22:29 2012] Detection parameters:
  Position = (196.2, 312.2) = 4 31 22.57 -61 27 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.7 +/- 22.7
  Background counts = 144.7
  Rate = 0.01 +/- 0.001

[Sun Jul 15 10:22:30 2012] Off-axis axis estimate = 7.48'
[Sun Jul 15 14:55:47 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 14:55:47 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Jul 15 14:55:47 2012] source mask rpix=2.3, npix_max = 32, mask sum = 31, frac = 0.963
[Sun Jul 15 14:55:47 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.17"
[Sun Jul 15 16:53:10 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jul 15 16:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src13.csv
[Sun Jul 15 16:53:10 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jul 15 16:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src13.csv
[Sun Jul 15 16:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:53:11 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jul 15 16:53:11 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jul 15 16:53:11 2012] Fit fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Jul 15 16:53:41 2012] Warning, spatial fit 13 centroid is now closest to src. 4
[Sun Jul 15 16:53:41 2012] Spatial fit model total counts = 2616.170000, observed total counts = 2146.000000
[Sun Jul 15 16:53:41 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 16:53:41 2012] Source 17 is offset by 2.539115 and 6.463448 pixels which is larger than
2 X fitted extent = 3.602602 x 3.602602, not incorporating fit results
[Sun Jul 15 16:53:41 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:53:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:53:41 2012] Assessing source extent using major
[Sun Jul 15 16:53:41 2012] Source does appear to be extended
[Sun Jul 15 16:53:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:53:41 2012] Source is confused with source 9
[Sun Jul 15 16:53:41 2012] Source is confused with source 16
[Sun Jul 15 21:15:04 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 21:15:04 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Jul 15 21:15:04 2012] source mask rpix=2.3, npix_max = 32, mask sum = 31, frac = 0.963
[Sun Jul 15 21:15:04 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.17"
[Sun Jul 15 23:15:45 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jul 15 23:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src12.csv
[Sun Jul 15 23:15:45 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jul 15 23:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src12.csv
[Sun Jul 15 23:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:15:46 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jul 15 23:15:46 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jul 15 23:15:46 2012] Fit fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jul 15 23:16:09 2012] Warning, spatial fit 12 centroid is now closest to src. 4
[Sun Jul 15 23:16:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:16:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:16:09 2012] Assessing source extent using major
[Sun Jul 15 23:16:09 2012] Source does appear to be extended
[Sun Jul 15 23:16:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 03:19:18 2012] XMMSAS src. selection expression = ellipse(17023.583969, 27113.657745, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 03:19:18 2012] Writing source region out to fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src17_src.reg
[Mon Jul 16 03:19:18 2012] Extracting stamp from image fullrun_mos2_xmm0105260901_pi300-10000_cl_sm2.00.img.gz, (159, 275) - (234, 350)
[Mon Jul 16 03:19:18 2012] XMMSAS bgd. selection expression = annulus(17023.583969, 27113.657745, 1087.500000, 2175.000000, X, Y) && !ellipse(18327.062500, 27981.950000, 1544.240044, 1544.240044, 0.000000, X, Y) && !ellipse(17982.144000, 27233.641000, 1500.216043, 1500.216043, 0.000000, X, Y) && !ellipse(17372.310000, 27718.082000, 563.464816, 563.464816, 0.000000, X, Y) && !ellipse(16586.084000, 28787.562000, 857.792025, 857.792025, 0.000000, X, Y) && !ellipse(19128.290600, 27258.298400, 593.016017, 593.016017, 0.000000, X, Y) && !ellipse(17539.720337, 27112.176239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17268.205093, 28746.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17256.607925, 29261.223328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18893.851654, 26660.040680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16896.131943, 27512.437836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17717.078949, 29256.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15307.534988, 29039.833710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16408.535812, 27510.066895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15995.411926, 30070.226685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15935.118866, 28656.264282, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 03:19:18 2012] Writing fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src17.gif
[Mon Jul 16 03:22:27 2012] Mean detx,y = (-6755.25, -5738.80) 
[Mon Jul 16 03:22:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 03:22:46 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 03:22:46 2012] Setting source spectrum file to fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jul 16 03:22:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jul 16 03:51:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 03:51:03 2012] rmf not generated due to insufficient counts
[Mon Jul 16 03:53:11 2012] Updating aperture counts using extracted products
[Mon Jul 16 03:53:11 2012] Error reading totcts from fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jul 16 03:53:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 03:53:11 2012] Using photon index=1.80, rate=0.0121, arf fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src17.arf
[Mon Jul 16 03:53:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 03:53:11 2012] Updating source flux to 2.7e-13
[Mon Jul 16 03:56:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting