[Sun Jul 15 10:22:29 2012] Detection parameters:
  Position = (200.3, 349.4) = 4 31 20.00 -61 25 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.9 +/- 20.6
  Background counts = 141.9
  Rate = 0.009 +/- 0.001

[Sun Jul 15 10:22:30 2012] Off-axis axis estimate = 8.02'
[Sun Jul 15 14:55:47 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 14:55:47 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sun Jul 15 14:55:47 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.773
[Sun Jul 15 14:55:47 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.44"
[Sun Jul 15 16:53:10 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jul 15 16:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src18.csv
[Sun Jul 15 16:53:10 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jul 15 16:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src18.csv
[Sun Jul 15 16:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:53:11 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jul 15 16:53:11 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jul 15 16:53:11 2012] Fit fullrun_mos2_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Jul 15 16:53:41 2012] Warning, spatial fit 18 centroid is now closest to src. 26
[Sun Jul 15 16:53:41 2012] Source 11 is offset by -2.227878 and 4.822974 pixels which is larger than
2 X fitted extent = 2.847163 x 2.847163, not incorporating fit results
[Sun Jul 15 16:53:41 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:53:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:53:41 2012] Assessing source extent using major
[Sun Jul 15 16:53:41 2012] Source does appear to be extended
[Sun Jul 15 16:53:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:53:41 2012] Source is confused with source 23
[Sun Jul 15 16:53:41 2012] Source is confused with source 32
[Sun Jul 15 21:15:04 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 21:15:04 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sun Jul 15 21:15:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.773
[Sun Jul 15 21:15:04 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.44"
[Sun Jul 15 23:15:46 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src16.ximg exists
[Sun Jul 15 23:15:46 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Jul 15 23:15:46 2012] Fit fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_src16 appears to have run properly
[Sun Jul 15 23:15:46 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Jul 15 23:15:46 2012] fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Jul 15 23:15:46 2012] Fit fullrun_mos2_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Jul 15 23:16:09 2012] Source 11 is offset by -2.430919 and 5.103525 pixels which is larger than
2 X fitted extent = 2.683609 x 2.683609, not incorporating fit results
[Sun Jul 15 23:16:09 2012] Warning, spatial fit 16 centroid is now closest to src. 26
[Sun Jul 15 23:16:09 2012] Source 11 is offset by -2.320733 and 5.157342 pixels which is larger than
2 X fitted extent = 2.922262 x 2.922262, not incorporating fit results
[Sun Jul 15 23:16:09 2012] Source 11 is offset by 6.303908 and 4.122663 pixels which is larger than
2 X fitted extent = 4.446736 x 4.446736, not incorporating fit results
[Sun Jul 15 23:16:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:16:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:16:09 2012] Assessing source extent using major
[Sun Jul 15 23:16:09 2012] Source does appear to be extended
[Sun Jul 15 23:16:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 03:19:18 2012] XMMSAS src. selection expression = ellipse(17380.700012, 30350.536713, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 03:19:18 2012] Writing source region out to fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src11_src.reg
[Mon Jul 16 03:19:18 2012] Extracting stamp from image fullrun_mos2_xmm0105260901_pi300-10000_cl_sm2.00.img.gz, (163, 312) - (238, 387)
[Mon Jul 16 03:19:18 2012] XMMSAS bgd. selection expression = annulus(17380.700012, 30350.536713, 1087.500000, 2175.000000, X, Y) && !ellipse(18327.062500, 27981.950000, 1544.240044, 1544.240044, 0.000000, X, Y) && !ellipse(17982.144000, 27233.641000, 1500.216043, 1500.216043, 0.000000, X, Y) && !ellipse(17372.310000, 27718.082000, 563.464816, 563.464816, 0.000000, X, Y) && !ellipse(16586.084000, 28787.562000, 857.792025, 857.792025, 0.000000, X, Y) && !ellipse(17495.831375, 31455.392639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17268.205093, 28746.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17256.607925, 29261.223328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16896.131943, 27512.437836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17717.078949, 29256.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17348.372375, 30755.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16265.383270, 31793.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15307.534988, 29039.833710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16408.535812, 27510.066895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15995.411926, 30070.226685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15935.118866, 28656.264282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16873.221695, 30735.056641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15827.592834, 30479.735748, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 03:19:18 2012] Writing fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src11.gif
[Mon Jul 16 03:23:41 2012] Mean detx,y = (-5411.84, -8635.53) 
[Mon Jul 16 03:23:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 03:23:52 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 03:23:52 2012] Setting source spectrum file to fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 16 03:23:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Jul 16 03:51:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 03:51:39 2012] rmf not generated due to insufficient counts
[Mon Jul 16 03:53:11 2012] Updating aperture counts using extracted products
[Mon Jul 16 03:53:11 2012] Error reading totcts from fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 16 03:53:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 03:53:12 2012] Using photon index=1.80, rate=0.00882, arf fullrun_mos2_xmm0105260901_pi300-10000_pass1_cl_src11.arf
[Mon Jul 16 03:53:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 03:53:12 2012] Updating source flux to 1.4e-13
[Mon Jul 16 03:56:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting