[Sun Jul 15 10:21:57 2012] Detection parameters:
  Position = (179.6, 330.0) = 4 31 32.59 -61 26 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.1 +/- 19.6
  Background counts = 101.9
  Rate = 0.004 +/- 0.0008

[Sun Jul 15 10:21:58 2012] Off-axis axis estimate = 8.91'
[Sun Jul 15 12:15:02 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 12:15:02 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Sun Jul 15 12:15:02 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.971
[Sun Jul 15 12:15:02 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.88"
[Sun Jul 15 14:55:44 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jul 15 14:55:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_src38.csv
[Sun Jul 15 14:55:44 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jul 15 14:55:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_src38.csv
[Sun Jul 15 14:55:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 14:55:46 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jul 15 14:55:46 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jul 15 14:55:46 2012] Fit fullrun_mos1_xmm0105260901_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jul 15 16:53:32 2012] Source 15 is offset by 6.634519 and 0.981504 pixels which is larger than
2 X fitted extent = 1.248184 x 1.248184, not incorporating fit results
[Sun Jul 15 16:53:32 2012] Warning, spatial fit 38 centroid is now closest to src. 13
[Sun Jul 15 16:53:33 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:53:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:53:33 2012] Assessing source extent using major
[Sun Jul 15 16:53:33 2012] Source does appear to be extended
[Sun Jul 15 16:53:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:53:33 2012] Source is confused with source 17
[Sun Jul 15 18:14:32 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:14:32 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Sun Jul 15 18:14:32 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.971
[Sun Jul 15 18:14:32 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 10.88"
[Sun Jul 15 21:15:03 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass1_src36.ximg exists
[Sun Jul 15 21:15:03 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Jul 15 21:15:03 2012] Fit fullrun_mos1_xmm0105260901_pi300-10000_cl_pass1_src36 appears to have run properly
[Sun Jul 15 21:15:04 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Jul 15 21:15:04 2012] fullrun_mos1_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Jul 15 21:15:04 2012] Fit fullrun_mos1_xmm0105260901_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Sun Jul 15 23:16:03 2012] Warning, spatial fit 36 centroid is now closest to src. 13
[Sun Jul 15 23:16:03 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:16:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:16:03 2012] Assessing source extent using major
[Sun Jul 15 23:16:03 2012] Source does appear to be extended
[Sun Jul 15 23:16:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 01:08:50 2012] XMMSAS src. selection expression = ellipse(15580.967163, 28661.154846, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 01:08:50 2012] Writing source region out to fullrun_mos1_xmm0105260901_pi300-10000_pass1_cl_src15_src.reg
[Mon Jul 16 01:08:50 2012] Extracting stamp from image fullrun_mos1_xmm0105260901_pi300-10000_cl_sm2.00.img.gz, (142, 292) - (217, 367)
[Mon Jul 16 01:08:50 2012] XMMSAS bgd. selection expression = annulus(15580.967163, 28661.154846, 1087.500000, 2175.000000, X, Y) && !ellipse(18218.630000, 28039.326000, 1592.344046, 1592.344046, 0.000000, X, Y) && !ellipse(18362.680400, 26896.802000, 2990.624086, 2529.960073, 84.674250, X, Y) && !ellipse(18036.200000, 29112.914800, 1620.680047, 1620.680047, 0.000000, X, Y) && !ellipse(18293.210000, 27902.488000, 2121.744061, 2121.744061, 0.000000, X, Y) && !ellipse(17595.370000, 27969.536000, 1137.056033, 1137.056033, 0.000000, X, Y) && !ellipse(17461.962494, 28582.953613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17261.734000, 28968.426000, 3184.688092, 3184.688092, 0.000000, X, Y) && !ellipse(16090.445400, 27801.364000, 1679.608048, 1679.608048, 0.000000, X, Y) && !ellipse(17082.144623, 30832.018311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17329.378200, 30428.880000, 1650.384047, 1650.384047, 0.000000, X, Y) && !ellipse(17687.918762, 29260.841003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17295.203800, 29649.690000, 3300.768095, 3300.768095, 0.000000, X, Y) && !ellipse(16788.156000, 30154.260000, 3322.160096, 3322.160096, 0.000000, X, Y) && !ellipse(16029.870000, 31341.524000, 1742.552050, 1742.552050, 0.000000, X, Y) && !ellipse(16663.908478, 29715.607697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17688.001068, 26835.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18334.002800, 25872.684000, 1495.312043, 1495.312043, 0.000000, X, Y) && !ellipse(16825.952881, 31433.839111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16823.053589, 27211.131836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16690.822800, 26650.446000, 1474.208042, 1474.208042, 0.000000, X, Y) && !ellipse(16587.641434, 27947.044891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16250.362000, 27326.386000, 847.328024, 847.328024, 0.000000, X, Y) && !ellipse(15959.288000, 28735.936660, 1741.440050, 458.103213, 69.667000, X, Y) && !ellipse(15170.307144, 29259.818817, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 01:08:50 2012] Writing fullrun_mos1_xmm0105260901_pi300-10000_pass1_cl_src15.gif
[Mon Jul 16 02:01:09 2012] Mean detx,y = (-7479.53, 7377.55) 
[Mon Jul 16 02:01:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 02:01:22 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 02:01:23 2012] Setting source spectrum file to fullrun_mos1_xmm0105260901_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Jul 16 02:01:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105260901_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon Jul 16 03:18:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 03:18:59 2012] rmf not generated due to insufficient counts
[Mon Jul 16 03:53:10 2012] Updating aperture counts using extracted products
[Mon Jul 16 03:53:10 2012] Error reading totcts from fullrun_mos1_xmm0105260901_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Jul 16 03:53:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 03:53:11 2012] Using photon index=1.80, rate=0.00409, arf fullrun_mos1_xmm0105260901_pi300-10000_pass1_cl_src15.arf
[Mon Jul 16 03:53:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 03:53:11 2012] Updating source flux to 7.8e-14
[Mon Jul 16 03:53:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting