[Sun Jun 2 08:34:28 2013] Detection parameters: Position = (266.5, 340.8) = 20 12 21.20 -56 52 30.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 117.0 +/- 27.1 Background counts = 303.5 Rate = 0.009 +/- 0.002 [Sun Jun 2 08:34:30 2013] Off-axis axis estimate = 3.85' [Sun Jun 2 08:35:32 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:35:32 2013] Initial guess for spatial extent in simple fitting = 8.35" [Sun Jun 2 08:35:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067 [Sun Jun 2 08:35:32 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 8.35" [Sun Jun 2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src49.ximg exists [Sun Jun 2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src49.csv [Sun Jun 2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src49_1.ximg exists [Sun Jun 2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src49.csv [Sun Jun 2 08:35:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src49_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists [Sun Jun 2 08:35:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src49.csv [Sun Jun 2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists [Sun Jun 2 08:35:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src49.csv [Sun Jun 2 08:35:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:36:07 2013] Spatial fit model total counts = 4134.700000, observed total counts = 3536.000000 [Sun Jun 2 08:36:07 2013] Poor agreement between spatial fit and data for source 50 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 2 08:36:07 2013] Spatial fit model total counts = 3683.680000, observed total counts = 3313.000000 [Sun Jun 2 08:36:07 2013] Poor agreement between spatial fit and data for source 50 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 2 08:36:07 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:36:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:36:07 2013] Assessing source extent using major [Sun Jun 2 08:36:07 2013] Source does appear to be extended [Sun Jun 2 08:36:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:36:07 2013] Source is confused with source 47 [Sun Jun 2 08:36:58 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:36:58 2013] Initial guess for spatial extent in simple fitting = 8.35" [Sun Jun 2 08:36:58 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067 [Sun Jun 2 08:36:58 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.35" [Sun Jun 2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src42.ximg exists [Sun Jun 2 08:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src42.csv [Sun Jun 2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src42_1.ximg exists [Sun Jun 2 08:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src42.csv [Sun Jun 2 08:37:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src42_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:37:03 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src42.ximg exists [Sun Jun 2 08:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src42.csv [Sun Jun 2 08:37:03 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists [Sun Jun 2 08:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src42.csv [Sun Jun 2 08:37:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:37:31 2013] Warning, spatial fit 42 centroid is now closest to src. 51 [Sun Jun 2 08:37:31 2013] Source 50 is offset by 9.534299 and 1.800600 pixels which is larger than 2 X fitted extent = 1.365080 x 1.365080, not incorporating fit results [Sun Jun 2 08:37:31 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:37:31 2013] Assessing source extent using major [Sun Jun 2 08:37:31 2013] Source does appear to be extended [Sun Jun 2 08:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:38:12 2013] XMMSAS src. selection expression = ellipse(23136.684052, 29602.798157, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 2 08:38:12 2013] Not overwriting source region fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50_src.reg [Sun Jun 2 08:38:12 2013] Extracting stamp from image fullrun_pn_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (229, 303) - (304, 378) [Sun Jun 2 08:38:12 2013] XMMSAS bgd. selection expression = annulus(23136.684052, 29602.798157, 1087.500000, 2175.000000, X, Y) && !ellipse(20694.777400, 27990.427400, 387.997611, 387.997611, 0.000000, X, Y) && !ellipse(23117.212067, 32406.394928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20331.735870, 32485.867920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24364.127991, 32300.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.637207, 32141.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.964000, 32303.078000, 1414.360041, 1414.360041, 0.000000, X, Y) && !ellipse(21194.883240, 31973.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22783.334167, 31622.492218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24508.126160, 31528.538696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23719.465637, 31446.256683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.460754, 31521.797577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.301056, 30906.542328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20608.338150, 31320.363159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.882294, 30912.086029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.918076, 30534.891327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21341.796631, 30239.468872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.486649, 30412.680328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24362.524353, 30236.643921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22658.310559, 29849.292000, 356.630410, 356.630410, 0.000000, X, Y) && !ellipse(26128.514435, 29631.623810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.538788, 29448.041809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24292.965240, 29097.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23252.696200, 28491.546120, 949.184027, 949.184027, 0.000000, X, Y) [Sun Jun 2 08:38:12 2013] Writing fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50.gif [Sun Jun 2 09:01:03 2013] Mean detx,y = (-5274.48, -439.52) [Sun Jun 2 09:01:08 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 09:01:27 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 09:01:28 2013] Setting source spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50_src_b10.pi.gz [Sun Jun 2 09:01:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50_bgd.pi.gz [Sun Jun 2 09:36:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 2 09:36:10 2013] rmf not generated due to insufficient counts [Sun Jun 2 10:39:26 2013] Updating aperture counts using extracted products [Sun Jun 2 10:39:26 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 2359.00 [Sun Jun 2 10:39:26 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50_bgd.pi.gz = 3510.00 [Sun Jun 2 10:39:26 2013] Got source and background scale factors 1266316.000000, 2448851.000000 [Sun Jun 2 10:39:26 2013] User source parameters: Position = (266.5, 340.8) = 20 12 21.20 -56 52 30.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 544.0 +/- 49.6 Background aperture counts = 1815.0 Rate = 0.03 +/- 0.003 [Sun Jun 2 10:39:26 2013] Updating counts from extracted products [Sun Jun 2 10:39:26 2013] Set source signif. to 543.96/42.60 = 12.77 [Sun Jun 2 10:39:35 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 10:39:35 2013] Using photon index=1.80, rate=0.0285, arf fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50.arf [Sun Jun 2 10:39:35 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 10:39:35 2013] Updating source flux to 1.1e-13 [Sun Jun 2 10:40:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 10:40:15 2013] xmm0105260601/analysis//spectral/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete