[Sun Jun 2 08:34:27 2013] Detection parameters: Position = (216.6, 350.1) = 20 12 47.65 -56 51 53.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 134.9 +/- 29.8 Background counts = 365.4 Rate = 0.007 +/- 0.001 [Sun Jun 2 08:34:30 2013] Off-axis axis estimate = 7.01' [Sun Jun 2 08:35:32 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:35:32 2013] Initial guess for spatial extent in simple fitting = 9.94" [Sun Jun 2 08:35:32 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.968 [Sun Jun 2 08:35:32 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 9.94" [Sun Jun 2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src41.ximg exists [Sun Jun 2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src41.csv [Sun Jun 2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src41_1.ximg exists [Sun Jun 2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src41.csv [Sun Jun 2 08:35:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Sun Jun 2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Sun Jun 2 08:35:36 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly [Sun Jun 2 08:36:07 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 11.395781 pixels away [Sun Jun 2 08:36:07 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:36:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:36:07 2013] Assessing source extent using major [Sun Jun 2 08:36:07 2013] Source does appear to be extended [Sun Jun 2 08:36:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:36:07 2013] Source is confused with source 37 [Sun Jun 2 08:36:58 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:36:58 2013] Initial guess for spatial extent in simple fitting = 9.94" [Sun Jun 2 08:36:58 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.968 [Sun Jun 2 08:36:58 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 9.94" [Sun Jun 2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src35.ximg exists [Sun Jun 2 08:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src35.csv [Sun Jun 2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src35_1.ximg exists [Sun Jun 2 08:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src35.csv [Sun Jun 2 08:37:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:37:02 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Sun Jun 2 08:37:02 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Sun Jun 2 08:37:02 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Sun Jun 2 08:37:31 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 11.386251 pixels away [Sun Jun 2 08:37:31 2013] Source 42 is offset by 0.534992 and -7.273708 pixels which is larger than 2 X fitted extent = 2.448189 x 2.448189, not incorporating fit results [Sun Jun 2 08:37:31 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 10.540123 pixels away [Sun Jun 2 08:37:31 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:37:31 2013] Assessing source extent using major [Sun Jun 2 08:37:31 2013] Source does appear to be extended [Sun Jun 2 08:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:38:12 2013] XMMSAS src. selection expression = ellipse(18797.418335, 30406.799438, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 2 08:38:12 2013] Not overwriting source region fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42_src.reg [Sun Jun 2 08:38:12 2013] Extracting stamp from image fullrun_pn_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (179, 313) - (254, 388) [Sun Jun 2 08:38:12 2013] XMMSAS bgd. selection expression = annulus(18797.418335, 30406.799438, 1087.500000, 2175.000000, X, Y) && !ellipse(20694.777400, 27990.427400, 387.997611, 387.997611, 0.000000, X, Y) && !ellipse(20544.523193, 33347.000122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19944.647202, 33362.895782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21719.001953, 33017.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19230.481491, 32781.699249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20331.735870, 32485.867920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.883240, 31973.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20608.338150, 31320.363159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.050308, 30839.768341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17888.208000, 30673.854000, 1625.216047, 1625.216047, 0.000000, X, Y) && !ellipse(19522.336914, 30848.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21341.796631, 30239.468872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.486649, 30412.680328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17100.764000, 29977.414400, 1703.888049, 1703.888049, 0.000000, X, Y) && !ellipse(15666.434000, 29399.538000, 1718.840049, 1718.840049, 0.000000, X, Y) && !ellipse(17261.190506, 28974.562469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15739.704400, 29342.297800, 1352.168039, 1352.168039, 0.000000, X, Y) && !ellipse(16497.260600, 28307.294000, 1684.952048, 1684.952048, 0.000000, X, Y) && !ellipse(16949.314000, 28696.260000, 1640.512047, 1640.512047, 0.000000, X, Y) && !ellipse(16174.294000, 28339.980000, 1716.560049, 1716.560049, 0.000000, X, Y) [Sun Jun 2 08:38:12 2013] Writing fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42.gif [Sun Jun 2 08:55:22 2013] Mean detx,y = (-9448.40, 854.59) [Sun Jun 2 08:55:26 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 08:55:53 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 08:55:54 2013] Setting source spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42_src_b10.pi.gz [Sun Jun 2 08:55:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42_bgd.pi.gz [Sun Jun 2 09:28:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 2 09:28:43 2013] rmf not generated due to insufficient counts [Sun Jun 2 10:39:23 2013] Updating aperture counts using extracted products [Sun Jun 2 10:39:23 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 3036.00 [Sun Jun 2 10:39:24 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42_bgd.pi.gz = 4045.00 [Sun Jun 2 10:39:24 2013] Got source and background scale factors 1347200.000000, 2236462.000000 [Sun Jun 2 10:39:24 2013] User source parameters: Position = (216.6, 350.1) = 20 12 47.65 -56 51 53.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 599.4 +/- 56.1 Background aperture counts = 2436.6 Rate = 0.03 +/- 0.003 [Sun Jun 2 10:39:24 2013] Updating counts from extracted products [Sun Jun 2 10:39:24 2013] Set source signif. to 599.37/49.36 = 12.14 [Sun Jun 2 10:39:35 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 10:39:35 2013] Using photon index=1.80, rate=0.0314, arf fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42.arf [Sun Jun 2 10:39:35 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 10:39:35 2013] Updating source flux to 1.7e-13 [Sun Jun 2 10:40:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 10:40:15 2013] xmm0105260601/analysis//spectral/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete