[Sun Jun 2 08:34:27 2013] Detection parameters: Position = (225.0, 355.1) = 20 12 43.23 -56 51 26.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 239.0 +/- 33.7 Background counts = 385.4 Rate = 0.02 +/- 0.003 [Sun Jun 2 08:34:30 2013] Off-axis axis estimate = 6.73' [Sun Jun 2 08:35:32 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:35:32 2013] Initial guess for spatial extent in simple fitting = 9.79" [Sun Jun 2 08:35:32 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.189 [Sun Jun 2 08:35:32 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.79" [Sun Jun 2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src38.ximg exists [Sun Jun 2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src38.csv [Sun Jun 2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src38_1.ximg exists [Sun Jun 2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src38.csv [Sun Jun 2 08:35:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src38_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src38.ximg exists [Sun Jun 2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists [Sun Jun 2 08:35:36 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly [Sun Jun 2 08:36:07 2013] Source 39 is offset by -0.214886 and -6.988405 pixels which is larger than 2 X fitted extent = 3.309352 x 3.309352, not incorporating fit results [Sun Jun 2 08:36:07 2013] Warning, spatial fit 38 centroid is now closest to src. 26 [Sun Jun 2 08:36:07 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:36:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:36:07 2013] Assessing source extent using major [Sun Jun 2 08:36:07 2013] Source does appear to be extended [Sun Jun 2 08:36:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:36:07 2013] Source is confused with source 36 [Sun Jun 2 08:36:58 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:36:58 2013] Initial guess for spatial extent in simple fitting = 9.79" [Sun Jun 2 08:36:58 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.189 [Sun Jun 2 08:36:58 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 9.79" [Sun Jun 2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src33.ximg exists [Sun Jun 2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src33_1.ximg exists [Sun Jun 2 08:37:00 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src33 appears to have run properly [Sun Jun 2 08:37:02 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src33.ximg exists [Sun Jun 2 08:37:02 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists [Sun Jun 2 08:37:02 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly [Sun Jun 2 08:37:31 2013] Source 39 is offset by -0.282314 and -6.895531 pixels which is larger than 2 X fitted extent = 3.714704 x 3.714704, not incorporating fit results [Sun Jun 2 08:37:31 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:37:31 2013] Assessing source extent using major [Sun Jun 2 08:37:31 2013] Source does appear to be extended [Sun Jun 2 08:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:38:11 2013] XMMSAS src. selection expression = ellipse(19522.336914, 30848.184784, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 2 08:38:11 2013] Not overwriting source region fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39_src.reg [Sun Jun 2 08:38:11 2013] Extracting stamp from image fullrun_pn_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (187, 318) - (262, 393) [Sun Jun 2 08:38:12 2013] XMMSAS bgd. selection expression = annulus(19522.336914, 30848.184784, 1087.500000, 2175.000000, X, Y) && !ellipse(22389.078247, 32731.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21742.313110, 33683.174622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.627258, 33720.552124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20544.523193, 33347.000122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19944.647202, 33362.895782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21719.001953, 33017.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19230.481491, 32781.699249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20331.735870, 32485.867920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.637207, 32141.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.883240, 31973.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.460754, 31521.797577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20608.338150, 31320.363159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.050308, 30839.768341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17888.208000, 30673.854000, 1625.216047, 1625.216047, 0.000000, X, Y) && !ellipse(21917.918076, 30534.891327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18797.418335, 30406.799438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21341.796631, 30239.468872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.486649, 30412.680328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17100.764000, 29977.414400, 1703.888049, 1703.888049, 0.000000, X, Y) && !ellipse(15666.434000, 29399.538000, 1718.840049, 1718.840049, 0.000000, X, Y) && !ellipse(17261.190506, 28974.562469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16497.260600, 28307.294000, 1684.952048, 1684.952048, 0.000000, X, Y) && !ellipse(16949.314000, 28696.260000, 1640.512047, 1640.512047, 0.000000, X, Y) && !ellipse(16174.294000, 28339.980000, 1716.560049, 1716.560049, 0.000000, X, Y) [Sun Jun 2 08:38:12 2013] Writing fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39.gif [Sun Jun 2 08:53:59 2013] Mean detx,y = (-9023.27, 112.24) [Sun Jun 2 08:54:02 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 08:54:22 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 08:54:23 2013] Setting source spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Sun Jun 2 08:54:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39_bgd.pi.gz [Sun Jun 2 09:28:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 2 09:28:12 2013] rmf not generated due to insufficient counts [Sun Jun 2 10:39:23 2013] Updating aperture counts using extracted products [Sun Jun 2 10:39:23 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 3568.00 [Sun Jun 2 10:39:23 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39_bgd.pi.gz = 3471.00 [Sun Jun 2 10:39:23 2013] Got source and background scale factors 1342400.000000, 1890514.000000 [Sun Jun 2 10:39:23 2013] User source parameters: Position = (225.0, 355.1) = 20 12 43.23 -56 51 26.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1103.3 +/- 60.7 Background aperture counts = 2464.7 Rate = 0.06 +/- 0.003 [Sun Jun 2 10:39:23 2013] Updating counts from extracted products [Sun Jun 2 10:39:23 2013] Set source signif. to 1103.34/49.65 = 22.22 [Sun Jun 2 10:39:34 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 10:39:34 2013] Using photon index=1.80, rate=0.0578, arf fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39.arf [Sun Jun 2 10:39:34 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 10:39:34 2013] Updating source flux to 3e-13 [Sun Jun 2 10:40:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 10:40:15 2013] xmm0105260601/analysis//spectral/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete