[Sun Jun  2 08:34:27 2013] Detection parameters:
  Position = (213.2, 356.1) = 20 12 49.44 -56 51 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.7 +/- 29.4
  Background counts = 340.7
  Rate = 0.007 +/- 0.001

[Sun Jun  2 08:34:30 2013] Off-axis axis estimate = 7.46'
[Sun Jun  2 08:35:32 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:35:32 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sun Jun  2 08:35:32 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Sun Jun  2 08:35:32 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 10.16"
[Sun Jun  2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src36.ximg exists
[Sun Jun  2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src36.csv
[Sun Jun  2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Jun  2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src36.csv
[Sun Jun  2 08:35:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Jun  2 08:35:36 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Jun  2 08:35:36 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Jun  2 08:36:07 2013] Warning, spatial fit 36 centroid is now closest to src. 31
[Sun Jun  2 08:36:07 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:36:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:36:07 2013] Assessing source extent using major
[Sun Jun  2 08:36:07 2013] Source does appear to be extended
[Sun Jun  2 08:36:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:36:07 2013] Source is confused with source 42
[Sun Jun  2 08:36:58 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:36:58 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sun Jun  2 08:36:58 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Sun Jun  2 08:36:58 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 10.16"
[Sun Jun  2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src31.ximg exists
[Sun Jun  2 08:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src31.csv
[Sun Jun  2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src31_1.ximg exists
[Sun Jun  2 08:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src31.csv
[Sun Jun  2 08:37:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:02 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sun Jun  2 08:37:02 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Jun  2 08:37:02 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sun Jun  2 08:37:31 2013] Spatial fit model total counts = 4050.710000, observed total counts = 4044.000000
[Sun Jun  2 08:37:31 2013] Offset between fit and detection position for source 37 = 7.661315 pixels
[Sun Jun  2 08:37:31 2013] 4128.694000 total counts/ 3789.810000 bgd. counts: snr = 5.504810
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 7.661315 pixels
  Position = (206.2, 353.1) = 20 12 53.20 -56 51 35.8
  Extent = 20.3 (20.3-40.6)", rotation angle = 0
  Source counts = 338.9 +/- 64.3
  Background counts = 3789.8
  Rate = 0.02 +/- 0.003
[Sun Jun  2 08:37:31 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:37:31 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:37:31 2013] Source does appear to be extended
[Sun Jun  2 08:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:38:11 2013] XMMSAS src. selection expression = ellipse(17888.208000, 30673.854000, 1218.912035, 1218.912035, 0.000000, X, Y)
[Sun Jun  2 08:38:11 2013] Not overwriting source region fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37_src.reg
[Sun Jun  2 08:38:11 2013] Extracting stamp from image fullrun_pn_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (136, 283) - (276, 423)
[Sun Jun  2 08:38:11 2013] XMMSAS bgd. selection expression = annulus(17888.208000, 30673.854000, 2031.520058, 4063.040117, X, Y) && !ellipse(22389.078247, 32731.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20694.777400, 27990.427400, 387.997611, 387.997611, 0.000000, X, Y) && !ellipse(22413.546997, 35119.380859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21742.313110, 33683.174622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.627258, 33720.552124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20544.523193, 33347.000122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19944.647202, 33362.895782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21719.001953, 33017.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19230.481491, 32781.699249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20331.735870, 32485.867920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.637207, 32141.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.883240, 31973.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22783.334167, 31622.492218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.460754, 31521.797577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20608.338150, 31320.363159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.050308, 30839.768341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.336914, 30848.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.918076, 30534.891327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18797.418335, 30406.799438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21341.796631, 30239.468872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.486649, 30412.680328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17100.764000, 29977.414400, 1703.888049, 1703.888049, 0.000000, X, Y) && !ellipse(15666.434000, 29399.538000, 1718.840049, 1718.840049, 0.000000, X, Y) && !ellipse(17261.190506, 28974.562469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15739.704400, 29342.297800, 1352.168039, 1352.168039, 0.000000, X, Y) && !ellipse(16497.260600, 28307.294000, 1684.952048, 1684.952048, 0.000000, X, Y) && !ellipse(16949.314000, 28696.260000, 1640.512047, 1640.512047, 0.000000, X, Y) && !ellipse(16174.294000, 28339.980000, 1716.560049, 1716.560049, 0.000000, X, Y)
[Sun Jun  2 08:38:11 2013] Writing fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37.gif
[Sun Jun  2 08:51:49 2013] Mean detx,y = (-10286.57, 1035.87) 
[Sun Jun  2 08:51:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 08:52:56 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 08:52:57 2013] Setting source spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jun  2 08:52:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jun  2 10:39:22 2013] Updating aperture counts using extracted products
[Sun Jun  2 10:39:22 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 8481.00
[Sun Jun  2 10:39:22 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37_bgd.pi.gz = 15664.00
[Sun Jun  2 10:39:22 2013] Got source and background scale factors 4673600.000000, 16166224.000000
[Sun Jun  2 10:39:22 2013] User source parameters:
  Position = (206.2, 353.1) = 20 12 53.20 -56 51 35.8
  Extent = 20.3 (20.3-40.6)", rotation angle = 0
  Source aperture counts = 3952.6 +/- 93.1
  Background aperture counts = 4528.4
  Rate = 0.2 +/- 0.005

[Sun Jun  2 10:39:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 10:39:34 2013] Using photon index=1.80, rate=0.0178, arf fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37.arf
[Sun Jun  2 10:39:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 10:39:34 2013] Updating source flux to 9.4e-14
[Sun Jun  2 10:40:03 2013] Flag c found in src. 37 procflags, skipping spectral fitting
[Sun Jun  2 10:40:15 2013] xmm0105260601/analysis//spectral/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete