[Sun Jun  2 08:34:23 2013] Detection parameters:
  Position = (238.4, 322.2) = 20 12 36.11 -56 53 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1287.7 +/- 49.7
  Background counts = 287.0
  Rate = 0.1 +/- 0.004

[Sun Jun  2 08:34:30 2013] Off-axis axis estimate = 4.68'
[Sun Jun  2 08:35:32 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:35:32 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sun Jun  2 08:35:32 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Sun Jun  2 08:35:32 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.77"
[Sun Jun  2 08:35:33 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  2 08:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src3.csv
[Sun Jun  2 08:35:33 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  2 08:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src3.csv
[Sun Jun  2 08:35:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:35:35 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  2 08:35:35 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  2 08:35:35 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun  2 08:36:07 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.704859 pixels away
[Sun Jun  2 08:36:07 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:36:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:36:07 2013] Assessing source extent using major
[Sun Jun  2 08:36:07 2013] Source does appear to be extended
[Sun Jun  2 08:36:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:36:58 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:36:58 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sun Jun  2 08:36:58 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Sun Jun  2 08:36:58 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.77"
[Sun Jun  2 08:36:59 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  2 08:36:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 08:36:59 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  2 08:36:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 08:36:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  2 08:37:00 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  2 08:37:00 2013] Fit fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun  2 08:37:31 2013] Spatial fit model total counts = 3672.970000, observed total counts = 3583.000000
[Sun Jun  2 08:37:31 2013] Offset between fit and detection position for source 3 = 0.109329 pixels
[Sun Jun  2 08:37:31 2013] 3692.372000 total counts/ 2894.810000 bgd. counts: snr = 14.823625
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.109329 pixels
  Position = (238.4, 322.3) = 20 12 36.11 -56 53 50.3
  Extent = 4.8 (4.5-5.2)", rotation angle = 0
  Source counts = 797.6 +/- 60.8
  Background counts = 2894.8
  Rate = 0.04 +/- 0.003
[Sun Jun  2 08:37:31 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:37:31 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:37:31 2013] Source does appear to be extended
[Sun Jun  2 08:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:38:09 2013] XMMSAS src. selection expression = ellipse(20694.777400, 27990.427400, 290.998208, 290.998208, 0.000000, X, Y)
[Sun Jun  2 08:38:09 2013] Not overwriting source region fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  2 08:38:09 2013] Extracting stamp from image fullrun_pn_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (222, 306) - (255, 339)
[Sun Jun  2 08:38:09 2013] XMMSAS bgd. selection expression = annulus(20694.777400, 27990.427400, 484.997014, 969.994028, X, Y)
[Sun Jun  2 08:38:09 2013] Writing fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3.gif
[Sun Jun  2 08:38:14 2013] ../../xmm0105260601/products/events/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0105260601/products/events/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Jun  2 08:38:14 2013] Mean detx,y = (-6643.62, 2103.43) 
[Sun Jun  2 08:38:14 2013] ../../xmm0105260601/products/images/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.img and ../../xmm0105260601/products/images/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Jun  2 08:38:14 2013] ../../xmm0105260601/products/spectra/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0105260601/products/spectra/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Jun  2 08:38:14 2013] Setting source spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Jun  2 08:38:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  2 08:38:14 2013] ../../xmm0105260601/products/lightcurves/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0105260601/products/lightcurves/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Jun  2 10:39:13 2013] Updating aperture counts using extracted products
[Sun Jun  2 10:39:13 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_src.pi.gz = 1206.00
[Sun Jun  2 10:39:13 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 2964.00
[Sun Jun  2 10:39:13 2013] Got source and background scale factors 265600.000000, 2189460.000000
[Sun Jun  2 10:39:13 2013] User source parameters:
  Position = (238.4, 322.3) = 20 12 36.11 -56 53 50.3
  Extent = 4.8 (4.5-5.2)", rotation angle = 0
  Source aperture counts = 846.4 +/- 35.7
  Background aperture counts = 359.6
  Rate = 0.04 +/- 0.002

[Sun Jun  2 10:39:33 2013] No arf file for this source, not re-computing flux
[Sun Jun  2 10:40:03 2013] Source 3 has no response, skipping
[Sun Jun  2 10:40:15 2013] xmm0105260601/analysis//spectral/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete