[Sun Jun  2 08:34:25 2013] Detection parameters:
  Position = (272.9, 368.0) = 20 12 17.78 -56 50 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 240.5 +/- 27.9
  Background counts = 333.9
  Rate = 0.01 +/- 0.001

[Sun Jun  2 08:34:30 2013] Off-axis axis estimate = 5.37'
[Sun Jun  2 08:35:32 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:35:32 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Sun Jun  2 08:35:32 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.780
[Sun Jun  2 08:35:32 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 9.11"
[Sun Jun  2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun  2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src23.csv
[Sun Jun  2 08:35:34 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun  2 08:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src23.csv
[Sun Jun  2 08:35:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:35:35 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun  2 08:35:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun  2 08:35:35 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun  2 08:35:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun  2 08:35:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:36:07 2013] Source 24 is offset by 0.850346 and -2.915230 pixels which is larger than
2 X fitted extent = 1.082694 x 1.082694, not incorporating fit results
[Sun Jun  2 08:36:07 2013] Warning, spatial fit 23 centroid is now closest to src. 28
[Sun Jun  2 08:36:07 2013] Spatial fit model total counts = 3864.100000, observed total counts = 3858.000000
[Sun Jun  2 08:36:07 2013] Offset between fit and detection position for source 24 = 4.316966 pixels
[Sun Jun  2 08:36:07 2013] Warning, changing simple spatial fit ID from 23 to 27
[Sun Jun  2 08:36:07 2013] 3772.381000 total counts/ 3617.580000 bgd. counts: snr = 2.573740
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 4.316966 pixels
  Position = (275.6, 371.3) = 20 12 16.36 -56 50 17.2
  Extent = 15.8 (13.9-16.7)", rotation angle = 0
  Source counts = 154.8 +/- 61.4
  Background counts = 3617.6
  Rate = 0.008 +/- 0.003
[Sun Jun  2 08:36:07 2013] Spatial fit model total counts = 4614.460000, observed total counts = 3826.000000
[Sun Jun  2 08:36:07 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 08:36:07 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:36:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:36:07 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:36:07 2013] Source does appear to be extended
[Sun Jun  2 08:36:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:36:07 2013] Source is confused with source 19
[Sun Jun  2 08:36:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:36:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 08:36:58 2013] Initial guess for spatial extent in simple fitting = 15.79"
[Sun Jun  2 08:36:58 2013] source mask rpix=3.6, npix_max = 68, mask sum = 48, frac = 0.704
[Sun Jun  2 08:36:58 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 15.79"
[Sun Jun  2 08:36:59 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun  2 08:36:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src21.csv
[Sun Jun  2 08:36:59 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun  2 08:36:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src21.csv
[Sun Jun  2 08:36:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:01 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun  2 08:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun  2 08:37:01 2013] fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun  2 08:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun  2 08:37:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:31 2013] Spatial fit model total counts = 4403.110000, observed total counts = 3593.000000
[Sun Jun  2 08:37:31 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 08:37:31 2013] Warning, spatial fit 21 centroid is now closest to src. 27
[Sun Jun  2 08:37:31 2013] Spatial fit model total counts = 3855.650000, observed total counts = 3858.000000
[Sun Jun  2 08:37:31 2013] Offset between fit and detection position for source 24 = 0.962348 pixels
[Sun Jun  2 08:37:31 2013] Warning, changing simple spatial fit ID from 21 to 24
[Sun Jun  2 08:37:31 2013] 3764.732000 total counts/ 3617.270000 bgd. counts: snr = 2.451826
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.962348 pixels
  Position = (274.8, 371.9) = 20 12 16.78 -56 50 14.9
  Extent = 17.7 (17.6-35.4)", rotation angle = 0
  Source counts = 147.5 +/- 61.4
  Background counts = 3617.3
  Rate = 0.008 +/- 0.003
[Sun Jun  2 08:37:31 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:37:31 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:37:31 2013] Source does appear to be extended
[Sun Jun  2 08:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:38:10 2013] XMMSAS src. selection expression = ellipse(23858.964000, 32303.078000, 1060.770031, 1060.770031, 0.000000, X, Y)
[Sun Jun  2 08:38:10 2013] Not overwriting source region fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24_src.reg
[Sun Jun  2 08:38:10 2013] Extracting stamp from image fullrun_pn_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (214, 311) - (336, 433)
[Sun Jun  2 08:38:10 2013] XMMSAS bgd. selection expression = annulus(23858.964000, 32303.078000, 1767.950051, 3535.900102, X, Y) && !ellipse(22389.078247, 32731.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22413.546997, 35119.380859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23456.694733, 33849.655579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21742.313110, 33683.174622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.627258, 33720.552124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23549.020721, 33362.221405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20544.523193, 33347.000122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19944.647202, 33362.895782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23071.327850, 33099.118622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21719.001953, 33017.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23117.212067, 32406.394928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20331.735870, 32485.867920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24364.127991, 32300.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.637207, 32141.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.883240, 31973.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22783.334167, 31622.492218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24508.126160, 31528.538696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23719.465637, 31446.256683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.460754, 31521.797577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.301056, 30906.542328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20608.338150, 31320.363159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.882294, 30912.086029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.050308, 30839.768341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26506.986206, 30626.797821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.336914, 30848.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.918076, 30534.891327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21341.796631, 30239.468872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.486649, 30412.680328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24362.524353, 30236.643921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22658.310559, 29849.292000, 356.630410, 356.630410, 0.000000, X, Y) && !ellipse(26128.514435, 29631.623810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.684052, 29602.798157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.538788, 29448.041809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24292.965240, 29097.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23252.696200, 28491.546120, 949.184027, 949.184027, 0.000000, X, Y)
[Sun Jun  2 08:38:10 2013] Writing fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24.gif
[Sun Jun  2 08:44:56 2013] Mean detx,y = (-5915.84, -3154.49) 
[Sun Jun  2 08:45:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 08:45:32 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 08:45:32 2013] Setting source spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun  2 08:45:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jun  2 10:39:19 2013] Updating aperture counts using extracted products
[Sun Jun  2 10:39:19 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 7058.00
[Sun Jun  2 10:39:19 2013] Total counts from fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24_bgd.pi.gz = 12269.00
[Sun Jun  2 10:39:19 2013] Got source and background scale factors 3017908.000000, 9919131.000000
[Sun Jun  2 10:39:19 2013] User source parameters:
  Position = (274.8, 371.9) = 20 12 16.78 -56 50 14.9
  Extent = 17.7 (17.6-35.4)", rotation angle = 0
  Source aperture counts = 3325.1 +/- 85.0
  Background aperture counts = 3732.9
  Rate = 0.2 +/- 0.004

[Sun Jun  2 10:39:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 10:39:34 2013] Using photon index=1.80, rate=0.00772, arf fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24.arf
[Sun Jun  2 10:39:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 10:39:34 2013] Updating source flux to 4.2e-14
[Sun Jun  2 10:40:03 2013] Flag b found in src. 24 procflags, skipping spectral fitting
[Sun Jun  2 10:40:03 2013] Flag p found in src. 24 procflags, skipping spectral fitting
[Sun Jun  2 10:40:03 2013] Flag c found in src. 24 procflags, skipping spectral fitting
[Sun Jun  2 10:40:15 2013] xmm0105260601/analysis//spectral/fullrun_pn_xmm0105260601_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete