[Sun Jun  2 08:34:38 2013] Detection parameters:
  Position = (298.9, 242.9) = 20 12 4.01 -56 59 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.4 +/- 12.9
  Background counts = 25.6
  Rate = 0.004 +/- 0.0006

[Sun Jun  2 08:34:39 2013] Off-axis axis estimate = 4.02'
[Sun Jun  2 08:35:40 2013] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:35:40 2013] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Jun  2 08:35:40 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Sun Jun  2 08:35:40 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 8.44"
[Sun Jun  2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src35.ximg exists
[Sun Jun  2 08:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src35.csv
[Sun Jun  2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun Jun  2 08:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src35.csv
[Sun Jun  2 08:35:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:35:43 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun Jun  2 08:35:43 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun Jun  2 08:35:43 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sun Jun  2 08:36:38 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.837892 pixels away
[Sun Jun  2 08:36:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:36:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:36:38 2013] Assessing source extent using major
[Sun Jun  2 08:36:38 2013] Source does appear to be extended
[Sun Jun  2 08:36:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:37:05 2013] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:37:05 2013] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Jun  2 08:37:05 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Sun Jun  2 08:37:05 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 8.44"
[Sun Jun  2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun  2 08:37:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src30.csv
[Sun Jun  2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun  2 08:37:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src30.csv
[Sun Jun  2 08:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:09 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun  2 08:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jun  2 08:37:09 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun  2 08:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jun  2 08:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:50 2013] Source 39 is offset by -6.649656 and -4.702620 pixels which is larger than
2 X fitted extent = 0.970216 x 0.970216, not incorporating fit results
[Sun Jun  2 08:37:50 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:37:50 2013] Assessing source extent using major
[Sun Jun  2 08:37:50 2013] Source does appear to be extended
[Sun Jun  2 08:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:37:50 2013] Deleting source due to low Poisson probability 0.9