[Sun Jun 2 08:34:37 2013] Detection parameters: Position = (243.2, 354.0) = 20 12 33.55 -56 51 31.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 109.4 +/- 21.9 Background counts = 167.0 Rate = 0.007 +/- 0.001 [Sun Jun 2 08:34:39 2013] Off-axis axis estimate = 5.68' [Sun Jun 2 08:35:40 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:35:40 2013] Initial guess for spatial extent in simple fitting = 9.27" [Sun Jun 2 08:35:40 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084 [Sun Jun 2 08:35:40 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 9.27" [Sun Jun 2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src29.ximg exists [Sun Jun 2 08:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src29.csv [Sun Jun 2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src29_1.ximg exists [Sun Jun 2 08:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src29.csv [Sun Jun 2 08:35:42 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:35:43 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sun Jun 2 08:35:43 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sun Jun 2 08:35:43 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Sun Jun 2 08:36:38 2013] Source 24 is offset by -3.230053 and -4.919642 pixels which is larger than 2 X fitted extent = 1.065343 x 1.065343, not incorporating fit results [Sun Jun 2 08:36:38 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:36:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:36:38 2013] Assessing source extent using major [Sun Jun 2 08:36:38 2013] Source does appear to be extended [Sun Jun 2 08:36:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:37:05 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:37:05 2013] Initial guess for spatial extent in simple fitting = 9.27" [Sun Jun 2 08:37:05 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084 [Sun Jun 2 08:37:05 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 9.27" [Sun Jun 2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src26.ximg exists [Sun Jun 2 08:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src26.csv [Sun Jun 2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src26_1.ximg exists [Sun Jun 2 08:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src26.csv [Sun Jun 2 08:37:07 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src26_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:37:09 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Sun Jun 2 08:37:09 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Sun Jun 2 08:37:09 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly [Sun Jun 2 08:37:50 2013] Source 24 is offset by -0.946237 and -9.852470 pixels which is larger than 2 X fitted extent = 1.143816 x 1.143816, not incorporating fit results [Sun Jun 2 08:37:50 2013] Source 24 is offset by 3.662154 and 4.454818 pixels which is larger than 2 X fitted extent = 2.307232 x 2.307232, not incorporating fit results [Sun Jun 2 08:37:50 2013] Warning, spatial fit 26 centroid is now closest to src. 13 [Sun Jun 2 08:37:50 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:37:50 2013] Assessing source extent using major [Sun Jun 2 08:37:50 2013] Source does appear to be extended [Sun Jun 2 08:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 10:04:07 2013] XMMSAS src. selection expression = ellipse(21110.275421, 30749.237152, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 2 10:04:07 2013] Not overwriting source region fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24_src.reg [Sun Jun 2 10:04:07 2013] Extracting stamp from image fullrun_mos2_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (206, 316) - (281, 391) [Sun Jun 2 10:04:07 2013] XMMSAS bgd. selection expression = annulus(21110.275421, 30749.237152, 1087.500000, 2175.000000, X, Y) && !ellipse(23157.096000, 33907.040000, 1566.968045, 1566.968045, 0.000000, X, Y) && !ellipse(22362.894000, 32784.546000, 281.180808, 281.180808, 0.000000, X, Y) && !ellipse(21310.907400, 31992.874200, 915.856026, 915.856026, 0.000000, X, Y) && !ellipse(20038.466000, 31300.592000, 1553.088045, 1553.088045, 0.000000, X, Y) && !ellipse(19661.090000, 31778.662000, 1307.432038, 1307.432038, 0.000000, X, Y) && !ellipse(21192.844177, 32570.489014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20405.244339, 32327.447632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.226166, 31889.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.853683, 33701.560699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20031.928635, 31945.091553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19268.187800, 31625.381400, 2063.152059, 2063.152059, 0.000000, X, Y) && !ellipse(20656.326477, 28102.414551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23501.508972, 31506.446198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20042.214000, 30320.776000, 875.496025, 875.496025, 0.000000, X, Y) && !ellipse(20167.398849, 32730.635071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18769.666000, 30685.812000, 1589.272046, 1589.272046, 0.000000, X, Y) && !ellipse(21696.924000, 33188.630060, 1596.176046, 1596.176046, 0.000000, X, Y) && !ellipse(21976.186676, 32053.610565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18769.746000, 30360.796600, 1590.712046, 1590.712046, 0.000000, X, Y) && !ellipse(19109.931140, 30579.650000, 1565.696045, 1565.696045, 0.000000, X, Y) && !ellipse(23783.499634, 30749.985870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19694.443878, 32690.565369, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 2 10:04:07 2013] Writing fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24.gif [Sun Jun 2 10:10:26 2013] Mean detx,y = (7727.05, 328.49) [Sun Jun 2 10:10:28 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 10:10:49 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 10:10:49 2013] Setting source spectrum file to fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Sun Jun 2 10:10:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24_bgd.pi.gz [Sun Jun 2 10:37:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 2 10:37:53 2013] rmf not generated due to insufficient counts [Sun Jun 2 10:39:48 2013] Updating aperture counts using extracted products [Sun Jun 2 10:39:48 2013] Total counts from fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1758.00 [Sun Jun 2 10:39:48 2013] Total counts from fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24_bgd.pi.gz = 2950.00 [Sun Jun 2 10:39:48 2013] Got source and background scale factors 1340800.000000, 3127718.000000 [Sun Jun 2 10:39:48 2013] User source parameters: Position = (243.2, 354.0) = 20 12 33.55 -56 51 31.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 493.4 +/- 42.9 Background aperture counts = 1264.6 Rate = 0.02 +/- 0.002 [Sun Jun 2 10:39:48 2013] Updating counts from extracted products [Sun Jun 2 10:39:48 2013] Set source signif. to 493.38/35.56 = 13.87 [Sun Jun 2 10:39:50 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 10:39:50 2013] Using photon index=1.80, rate=0.0206, arf fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24.arf [Sun Jun 2 10:39:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 10:39:50 2013] Updating source flux to 3.4e-13 [Sun Jun 2 10:39:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 10:40:03 2013] xmm0105260601/analysis//spectral/fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete