[Sun Jun 2 08:34:37 2013] Detection parameters: Position = (217.2, 355.9) = 20 12 47.34 -56 51 26.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 103.0 +/- 21.2 Background counts = 140.6 Rate = 0.008 +/- 0.002 [Sun Jun 2 08:34:39 2013] Off-axis axis estimate = 7.22' [Sun Jun 2 08:35:40 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 08:35:40 2013] Initial guess for spatial extent in simple fitting = 10.04" [Sun Jun 2 08:35:40 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142 [Sun Jun 2 08:35:40 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 10.04" [Sun Jun 2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src23.ximg exists [Sun Jun 2 08:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src23.csv [Sun Jun 2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src23_1.ximg exists [Sun Jun 2 08:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src23.csv [Sun Jun 2 08:35:42 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 08:35:43 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Sun Jun 2 08:35:43 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Sun Jun 2 08:35:43 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly [Sun Jun 2 08:36:38 2013] Spatial fit model total counts = 2397.010000, observed total counts = 2386.000000 [Sun Jun 2 08:36:38 2013] Offset between fit and detection position for source 23 = 2.821201 pixels [Sun Jun 2 08:36:38 2013] Warning, changing simple spatial fit ID from 23 to 15 [Sun Jun 2 08:36:38 2013] 2458.807000 total counts/ 2284.320000 bgd. counts: snr = 3.650771 Spatial fit parameters: Offset between fit and detection position for source 23 = 2.821201 pixels Position = (216.3, 353.3) = 20 12 47.82 -56 51 35.3 Extent = 19.9 (19.9-19.9)", rotation angle = 0 Source counts = 174.5 +/- 49.6 Background counts = 2284.3 Rate = 0.007 +/- 0.002 [Sun Jun 2 08:36:38 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:36:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:36:38 2013] Assessing source extent using major axis lower bound [Sun Jun 2 08:36:38 2013] Source does appear to be extended [Sun Jun 2 08:36:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 08:36:38 2013] Source is confused with source 26 [Sun Jun 2 08:36:38 2013] Source is confused with source 30 [Sun Jun 2 08:36:38 2013] Source is confused with source 28 [Sun Jun 2 08:37:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Jun 2 08:37:05 2013] Initial guess for spatial extent in simple fitting = 19.87" [Sun Jun 2 08:37:05 2013] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.974 [Sun Jun 2 08:37:05 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 19.87" [Sun Jun 2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src20.ximg exists [Sun Jun 2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src20_1.ximg exists [Sun Jun 2 08:37:07 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src20 appears to have run properly [Sun Jun 2 08:37:09 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Sun Jun 2 08:37:09 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Sun Jun 2 08:37:09 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly [Sun Jun 2 08:37:50 2013] Source 23 is offset by -4.636069 and -6.795218 pixels which is larger than 2 X fitted extent = 1.257894 x 1.257894, not incorporating fit results [Sun Jun 2 08:37:50 2013] Warning, spatial fit 20 centroid is now closest to src. 28 [Sun Jun 2 08:37:50 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 08:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 08:37:50 2013] Assessing source extent using major axis lower bound [Sun Jun 2 08:37:50 2013] Source does appear to be extended [Sun Jun 2 08:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 10:04:07 2013] XMMSAS src. selection expression = ellipse(18769.666000, 30685.812000, 1191.954034, 1191.954034, 0.000000, X, Y) [Sun Jun 2 10:04:07 2013] Not overwriting source region fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23_src.reg [Sun Jun 2 10:04:07 2013] Extracting stamp from image fullrun_mos2_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (148, 285) - (285, 422) [Sun Jun 2 10:04:07 2013] XMMSAS bgd. selection expression = annulus(18769.666000, 30685.812000, 1986.590057, 3973.180114, X, Y) && !ellipse(23157.096000, 33907.040000, 1566.968045, 1566.968045, 0.000000, X, Y) && !ellipse(22362.894000, 32784.546000, 281.180808, 281.180808, 0.000000, X, Y) && !ellipse(21310.907400, 31992.874200, 915.856026, 915.856026, 0.000000, X, Y) && !ellipse(20038.466000, 31300.592000, 1553.088045, 1553.088045, 0.000000, X, Y) && !ellipse(19661.090000, 31778.662000, 1307.432038, 1307.432038, 0.000000, X, Y) && !ellipse(21192.844177, 32570.489014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20405.244339, 32327.447632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.226166, 31889.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.853683, 33701.560699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20031.928635, 31945.091553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19268.187800, 31625.381400, 2063.152059, 2063.152059, 0.000000, X, Y) && !ellipse(20656.326477, 28102.414551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23501.508972, 31506.446198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20042.214000, 30320.776000, 875.496025, 875.496025, 0.000000, X, Y) && !ellipse(20167.398849, 32730.635071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21696.924000, 33188.630060, 1596.176046, 1596.176046, 0.000000, X, Y) && !ellipse(21976.186676, 32053.610565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18769.746000, 30360.796600, 1590.712046, 1590.712046, 0.000000, X, Y) && !ellipse(19109.931140, 30579.650000, 1565.696045, 1565.696045, 0.000000, X, Y) && !ellipse(21110.275421, 30749.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19694.443878, 32690.565369, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 2 10:04:07 2013] Writing fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23.gif [Sun Jun 2 10:06:16 2013] Mean detx,y = (9692.62, -825.29) [Sun Jun 2 10:06:19 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 10:06:52 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 10:06:53 2013] Setting source spectrum file to fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Sun Jun 2 10:06:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23_bgd.pi.gz [Sun Jun 2 10:39:47 2013] Updating aperture counts using extracted products [Sun Jun 2 10:39:47 2013] Total counts from fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 4569.00 [Sun Jun 2 10:39:47 2013] Total counts from fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23_bgd.pi.gz = 13385.00 [Sun Jun 2 10:39:47 2013] Got source and background scale factors 4460800.000000, 24188957.000000 [Sun Jun 2 10:39:47 2013] User source parameters: Position = (216.3, 353.3) = 20 12 47.82 -56 51 35.3 Extent = 19.9 (19.9-19.9)", rotation angle = 0 Source aperture counts = 2100.6 +/- 68.6 Background aperture counts = 2468.4 Rate = 0.09 +/- 0.003 [Sun Jun 2 10:39:49 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 10:39:49 2013] Using photon index=1.80, rate=0.00727, arf fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23.arf [Sun Jun 2 10:39:49 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 10:39:49 2013] Updating source flux to 1.3e-13 [Sun Jun 2 10:39:55 2013] Flag b found in src. 23 procflags, skipping spectral fitting [Sun Jun 2 10:39:55 2013] Flag c found in src. 23 procflags, skipping spectral fitting [Sun Jun 2 10:40:03 2013] xmm0105260601/analysis//spectral/fullrun_mos2_xmm0105260601_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete