[Sun Jun  2 08:34:36 2013] Detection parameters:
  Position = (236.1, 364.0) = 20 12 37.30 -56 50 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.4 +/- 24.6
  Background counts = 161.9
  Rate = 0.01 +/- 0.002

[Sun Jun  2 08:34:39 2013] Off-axis axis estimate = 6.56'
[Sun Jun  2 08:35:40 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:35:40 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sun Jun  2 08:35:40 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.206
[Sun Jun  2 08:35:40 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.71"
[Sun Jun  2 08:35:41 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun  2 08:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src7.csv
[Sun Jun  2 08:35:41 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun  2 08:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src7.csv
[Sun Jun  2 08:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun  2 08:35:42 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun  2 08:35:42 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Jun  2 08:36:38 2013] Warning, spatial fit 7 centroid is now closest to src. 21
[Sun Jun  2 08:36:38 2013] Source 20 is offset by 1.148420 and -2.999331 pixels which is larger than
2 X fitted extent = 1.129743 x 1.129743, not incorporating fit results
[Sun Jun  2 08:36:38 2013] Source 20 is offset by 7.114397 and 5.966669 pixels which is larger than
2 X fitted extent = 1.127618 x 1.127618, not incorporating fit results
[Sun Jun  2 08:36:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:36:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:36:38 2013] Assessing source extent using major
[Sun Jun  2 08:36:38 2013] Source does appear to be extended
[Sun Jun  2 08:36:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:36:38 2013] Source is confused with source 21
[Sun Jun  2 08:37:05 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:37:05 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sun Jun  2 08:37:05 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.206
[Sun Jun  2 08:37:05 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.71"
[Sun Jun  2 08:37:06 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun  2 08:37:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src7.csv
[Sun Jun  2 08:37:06 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun  2 08:37:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src7.csv
[Sun Jun  2 08:37:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun  2 08:37:07 2013] fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun  2 08:37:07 2013] Fit fullrun_mos2_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jun  2 08:37:50 2013] Spatial fit model total counts = 2630.690000, observed total counts = 2592.000000
[Sun Jun  2 08:37:50 2013] Offset between fit and detection position for source 20 = 0.151095 pixels
[Sun Jun  2 08:37:50 2013] 2456.003200 total counts/ 2401.210000 bgd. counts: snr = 1.118180
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.151095 pixels
  Position = (236.2, 363.9) = 20 12 37.25 -56 50 49.5
  Extent = 5.0 (2.4-11.8)", rotation angle = 0
  Source counts = 54.8 +/- 49.6
  Background counts = 2401.2
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability