[Sun Jun  2 08:34:33 2013] Detection parameters:
  Position = (238.6, 322.8) = 20 12 36.01 -56 53 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 407.2 +/- 26.2
  Background counts = 106.7
  Rate = 0.02 +/- 0.001

[Sun Jun  2 08:34:34 2013] Off-axis axis estimate = 4.68'
[Sun Jun  2 08:35:37 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:35:37 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sun Jun  2 08:35:37 2013] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.553
[Sun Jun  2 08:35:37 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.77"
[Sun Jun  2 08:35:38 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun  2 08:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_src4.csv
[Sun Jun  2 08:35:38 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun  2 08:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_src4.csv
[Sun Jun  2 08:35:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:35:39 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun  2 08:35:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun  2 08:35:39 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun  2 08:35:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun  2 08:35:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:36:22 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 15.902163 pixels away
[Sun Jun  2 08:36:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:36:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:36:23 2013] Assessing source extent using major
[Sun Jun  2 08:36:23 2013] Source does appear to be extended
[Sun Jun  2 08:36:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:37:03 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:37:03 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sun Jun  2 08:37:03 2013] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.553
[Sun Jun  2 08:37:03 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.77"
[Sun Jun  2 08:37:03 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  2 08:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 08:37:04 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  2 08:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 08:37:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:04 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  2 08:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  2 08:37:04 2013] fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  2 08:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  2 08:37:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:37:40 2013] Spatial fit model total counts = 1667.900000, observed total counts = 1229.000000
[Sun Jun  2 08:37:40 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 08:37:40 2013] Spatial fit model total counts = 1576.740000, observed total counts = 1174.000000
[Sun Jun  2 08:37:40 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 08:37:40 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:37:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:37:40 2013] Assessing source extent using major
[Sun Jun  2 08:37:40 2013] Source does appear to be extended
[Sun Jun  2 08:37:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 10:03:51 2013] XMMSAS src. selection expression = ellipse(20711.547104, 28034.867950, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 10:03:51 2013] Not overwriting source region fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.reg
[Sun Jun  2 10:03:51 2013] Extracting stamp from image fullrun_mos1_xmm0105260601_pi300-10000_cl_sm2.00.img.gz, (201, 285) - (276, 360)
[Sun Jun  2 10:03:51 2013] XMMSAS bgd. selection expression = annulus(20711.547104, 28034.867950, 1087.500000, 2175.000000, X, Y) && !ellipse(20441.893036, 30820.240601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18725.155075, 30133.501343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17774.921417, 29432.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18961.938553, 31059.734863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23090.810455, 30800.229645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20556.433655, 30285.615936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19211.967972, 30051.386597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21923.886581, 29222.945770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18200.228000, 30898.479400, 1605.208046, 1605.208046, 0.000000, X, Y)
[Sun Jun  2 10:03:51 2013] Writing fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38.gif
[Sun Jun  2 10:03:52 2013] ../../xmm0105260601/products/events/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0105260601/products/events/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Sun Jun  2 10:03:52 2013] Mean detx,y = (-2028.47, -7021.40) 
[Sun Jun  2 10:03:52 2013] ../../xmm0105260601/products/images/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.img and ../../xmm0105260601/products/images/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Sun Jun  2 10:03:52 2013] ../../xmm0105260601/products/spectra/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.pi and ../../xmm0105260601/products/spectra/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Sun Jun  2 10:03:52 2013] Setting source spectrum file to fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.pi.gz
[Sun Jun  2 10:03:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sun Jun  2 10:03:52 2013] ../../xmm0105260601/products/lightcurves/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0105260601/products/lightcurves/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Sun Jun  2 10:04:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 10:04:01 2013] rmf not generated due to insufficient counts
[Sun Jun  2 10:39:36 2013] Updating aperture counts using extracted products
[Sun Jun  2 10:39:36 2013] Total counts from fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_src.pi.gz = 889.00
[Sun Jun  2 10:39:36 2013] Total counts from fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_bgd.pi.gz = 4096.00
[Sun Jun  2 10:39:36 2013] Got source and background scale factors 1001420.000000, 7687474.000000
[Sun Jun  2 10:39:36 2013] User source parameters:
  Position = (238.6, 322.8) = 20 12 36.01 -56 53 51.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 355.4 +/- 30.8
  Background aperture counts = 533.6
  Rate = 0.01 +/- 0.001

[Sun Jun  2 10:39:36 2013] Updating counts from extracted products
[Sun Jun  2 10:39:36 2013] Set source signif. to 355.43/23.10 = 15.39
[Sun Jun  2 10:39:43 2013] No arf file for this source, not re-computing flux
[Sun Jun  2 10:39:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 10:39:55 2013] xmm0105260601/analysis//spectral/fullrun_mos1_xmm0105260601_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete