[Mon Aug 20 20:37:28 2012] Detection parameters:
  Position = (183.7, 444.0) = 20 12 7.59 -56 38 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.5 +/- 10.3
  Background counts = 7.5
  Rate = 0.005 +/- 0.0008

[Mon Aug 20 20:37:28 2012] Off-axis axis estimate = 13.44'
[Mon Aug 20 21:26:44 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 21:26:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 21:26:44 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Aug 20 21:26:44 2012] source mask rpix=3.0, npix_max = 49, mask sum = 53, frac = 1.068
[Mon Aug 20 21:26:44 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.15"
[Mon Aug 20 22:26:23 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_src13.ximg exists
[Mon Aug 20 22:26:23 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Aug 20 22:26:23 2012] Fit fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_src13 appears to have run properly
[Mon Aug 20 22:26:23 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Aug 20 22:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Aug 20 22:26:23 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Aug 20 22:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Aug 20 22:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 22:42:37 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.855639 pixels away
[Mon Aug 20 22:42:37 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 22:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 22:42:37 2012] Assessing source extent using major
[Mon Aug 20 22:42:37 2012] Source does appear to be extended
[Mon Aug 20 22:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 23:29:49 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 23:29:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 23:29:49 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Aug 20 23:29:49 2012] source mask rpix=3.0, npix_max = 49, mask sum = 53, frac = 1.068
[Mon Aug 20 23:29:49 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.15"
[Tue Aug 21 00:10:07 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_src12.ximg exists
[Tue Aug 21 00:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_src12.csv
[Tue Aug 21 00:10:07 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Aug 21 00:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_src12.csv
[Tue Aug 21 00:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 00:10:07 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Aug 21 00:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Aug 21 00:10:07 2012] fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Aug 21 00:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Aug 21 00:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260501_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 00:26:54 2012] Spatial fit model total counts = 159.700000, observed total counts = 142.000000
[Tue Aug 21 00:26:54 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 21 00:26:54 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 00:26:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 00:26:54 2012] Assessing source extent using major
[Tue Aug 21 00:26:54 2012] Source does appear to be extended
[Tue Aug 21 00:26:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:58:12 2012] XMMSAS src. selection expression = ellipse(15932.528885, 38581.379761, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 00:58:12 2012] Writing source region out to fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14_src.reg
[Tue Aug 21 00:58:12 2012] Extracting stamp from image fullrun_mos1_xmm0105260501_pi300-10000_cl_sm2.00.img.gz, (146, 407) - (221, 482)
[Tue Aug 21 00:58:12 2012] XMMSAS bgd. selection expression = annulus(15932.528885, 38581.379761, 1087.500000, 2175.000000, X, Y)
[Tue Aug 21 00:58:12 2012] Writing fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14.gif
[Tue Aug 21 01:01:15 2012] Mean detx,y = (6776.89, -15240.72) 
[Tue Aug 21 01:01:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 01:01:32 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 01:01:32 2012] Setting source spectrum file to fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Aug 21 01:01:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Aug 21 01:03:35 2012] Not generating rmf since there are only 61 counts
[Tue Aug 21 01:03:35 2012] rmf not generated due to insufficient counts
[Tue Aug 21 01:08:59 2012] Updating aperture counts using extracted products
[Tue Aug 21 01:08:59 2012] Error reading totcts from fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Aug 21 01:09:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 01:09:00 2012] Using photon index=1.80, rate=0.00469, arf fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14.arf
[Tue Aug 21 01:09:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 01:09:00 2012] Updating source flux to 1.7e-13
[Tue Aug 21 01:09:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 21 01:09:03 2012] xmm0105260501/analysis//spectral/fullrun_mos1_xmm0105260501_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete