[Fri Jul  6 00:00:21 2012] Detection parameters:
  Position = (328.5, 293.2) = 20 12 7.79 -56 38 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 734.0 +/- 34.5
  Background counts = 56.7
  Rate = 0.07 +/- 0.003

[Fri Jul  6 00:00:22 2012] Off-axis axis estimate = 2.21'
[Fri Jul  6 00:02:12 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 00:02:12 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Jul  6 00:02:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.004
[Fri Jul  6 00:02:12 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.53"
[Fri Jul  6 01:28:33 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul  6 01:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src3.csv
[Fri Jul  6 01:28:33 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul  6 01:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src3.csv
[Fri Jul  6 01:28:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:34 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul  6 01:28:34 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul  6 01:28:34 2012] Fit fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul  6 03:29:18 2012] Spatial fit model total counts = 1177.000000, observed total counts = 1177.000000
[Fri Jul  6 03:29:18 2012] Offset between fit and detection position for source 3 = 0.111320 pixels
[Fri Jul  6 03:29:18 2012] 1174.703000 total counts/ 686.463000 bgd. counts: snr = 18.634802
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.111320 pixels
  Position = (328.5, 293.3) = 20 12 7.77 -56 38 27.0
  Extent = 5.0 (4.6-5.5)", rotation angle = 0
  Source counts = 488.2 +/- 34.3
  Background counts = 686.5
  Rate = 0.04 +/- 0.003
[Fri Jul  6 03:29:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 03:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 03:29:18 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 03:29:18 2012] Source does appear to be extended
[Fri Jul  6 03:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:29:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:29:36 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Fri Jul  6 03:29:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.816
[Fri Jul  6 03:29:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.05"
[Fri Jul  6 06:17:08 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul  6 06:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src3.csv
[Fri Jul  6 06:17:08 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul  6 06:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src3.csv
[Fri Jul  6 06:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 06:17:09 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul  6 06:17:09 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul  6 06:17:09 2012] Fit fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul  6 08:03:21 2012] Spatial fit model total counts = 1176.620000, observed total counts = 1177.000000
[Fri Jul  6 08:03:21 2012] Offset between fit and detection position for source 3 = 0.000621 pixels
[Fri Jul  6 08:03:21 2012] 1174.362000 total counts/ 688.608000 bgd. counts: snr = 18.511020
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000621 pixels
  Position = (328.5, 293.3) = 20 12 7.77 -56 38 27.0
  Extent = 5.0 (4.6-5.4)", rotation angle = 0
  Source counts = 485.8 +/- 34.3
  Background counts = 688.6
  Rate = 0.04 +/- 0.003
[Fri Jul  6 08:03:21 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:03:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:03:21 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 08:03:21 2012] Source does appear to be extended
[Fri Jul  6 08:03:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 08:03:34 2012] XMMSAS src. selection expression = ellipse(28532.139200, 25472.703600, 300.210009, 300.210009, 0.000000, X, Y)
[Fri Jul  6 08:03:34 2012] Writing source region out to fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul  6 08:03:34 2012] Extracting stamp from image fullrun_pn_xmm0105260401_pi300-10000_cl_sm2.00.img.gz, (311, 276) - (346, 311)
[Fri Jul  6 08:03:34 2012] XMMSAS bgd. selection expression = annulus(28532.139200, 25472.703600, 500.350014, 1000.700029, X, Y)
[Fri Jul  6 08:03:34 2012] Writing fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3.gif
[Fri Jul  6 08:06:06 2012] Mean detx,y = (1458.58, 639.36) 
[Fri Jul  6 08:06:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:06:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:06:20 2012] Setting source spectrum file to fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul  6 08:06:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul  6 09:08:38 2012] Updating aperture counts using extracted products
[Fri Jul  6 09:08:38 2012] Error reading totcts from fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul  6 09:08:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 09:08:39 2012] Using photon index=1.80, rate=0.0382, arf fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3.arf
[Fri Jul  6 09:08:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 09:08:39 2012] Updating source flux to 1.2e-13
[Fri Jul  6 09:10:14 2012] Reading fit data from xmm0105260401/analysis//spectral/fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3_pl.csv
[Fri Jul  6 09:10:14 2012] Spectral fit parameter nH value = 6.7716e+21
[Fri Jul  6 09:10:14 2012] Spectral fit parameter PhoIndex value = 6.20187
[Fri Jul  6 09:10:14 2012] Failed to get F(0.3-8.0) from xmm0105260401/analysis//spectral/fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 09:10:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 09:10:14 2012] Using Nh = 6.8e+21, photon index=6.20, rate=0.0382, arf fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src3.arf
[Fri Jul  6 09:10:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 09:10:14 2012] Updating source flux to 7.3e-14