[Fri Jul  6 00:00:21 2012] Detection parameters:
  Position = (404.4, 214.9) = 20 11 27.63 -56 44 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1291.8 +/- 45.3
  Background counts = 64.5
  Rate = 0.2 +/- 0.007

[Fri Jul  6 00:00:22 2012] Off-axis axis estimate = 9.78'
[Fri Jul  6 00:02:12 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 00:02:12 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Fri Jul  6 00:02:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Fri Jul  6 00:02:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.32"
[Fri Jul  6 01:28:33 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul  6 01:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src2.csv
[Fri Jul  6 01:28:33 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul  6 01:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src2.csv
[Fri Jul  6 01:28:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:34 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul  6 01:28:34 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul  6 01:28:34 2012] Fit fullrun_pn_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul  6 03:29:18 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.106590 pixels away
[Fri Jul  6 03:29:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 03:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 03:29:18 2012] Assessing source extent using major
[Fri Jul  6 03:29:18 2012] Source does appear to be extended
[Fri Jul  6 03:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:29:36 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:29:36 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Fri Jul  6 03:29:36 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Fri Jul  6 03:29:36 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.32"
[Fri Jul  6 06:17:08 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul  6 06:17:08 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul  6 06:17:08 2012] Fit fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jul  6 06:17:09 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul  6 06:17:09 2012] fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul  6 06:17:09 2012] Fit fullrun_pn_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul  6 08:03:21 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.271225 pixels away
[Fri Jul  6 08:03:21 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:03:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:03:21 2012] Assessing source extent using major
[Fri Jul  6 08:03:21 2012] Source does appear to be extended
[Fri Jul  6 08:03:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 08:03:34 2012] Counts = 1291.813110, rescaling region sizes by 2.000000
[Fri Jul  6 08:03:34 2012] XMMSAS src. selection expression = ellipse(35130.529327, 18648.708817, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul  6 08:03:34 2012] Writing source region out to fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul  6 08:03:34 2012] Extracting stamp from image fullrun_pn_xmm0105260401_pi300-10000_cl_sm2.00.img.gz, (329, 140) - (479, 290)
[Fri Jul  6 08:03:34 2012] XMMSAS bgd. selection expression = annulus(35130.529327, 18648.708817, 4350.000000, 8700.000000, X, Y) && !ellipse(28532.139200, 25472.703600, 400.280012, 400.280012, 0.000000, X, Y) && !ellipse(26266.079468, 11773.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.799744, 11190.793915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.010620, 11175.989471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41941.939929, 26623.734536, 629.705975, 326.433699, 249.158110, X, Y) && !ellipse(27137.714966, 19819.835602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33933.581400, 15898.818200, 433.759212, 222.847206, 149.802816, X, Y) && !ellipse(27434.130402, 13343.328384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.026001, 12794.657288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26891.139740, 12880.336411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.980560, 12395.522751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.585693, 11853.991028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27117.061493, 11603.787704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28650.173645, 11595.610214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27541.770599, 11433.648117, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 08:03:34 2012] Writing fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2.gif
[Fri Jul  6 08:04:09 2012] Mean detx,y = (10399.47, 3558.09) 
[Fri Jul  6 08:04:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:06:00 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:06:00 2012] Setting source spectrum file to fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 08:06:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul  6 08:15:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 08:15:26 2012] rmf not generated due to insufficient counts
[Fri Jul  6 09:08:38 2012] Updating aperture counts using extracted products
[Fri Jul  6 09:08:38 2012] Error reading totcts from fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 09:08:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 09:08:39 2012] Using photon index=1.80, rate=0.199, arf fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 09:08:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 09:08:39 2012] Updating source flux to 8.1e-13
[Fri Jul  6 09:10:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul  6 09:10:14 2012] xmm0105260401/analysis//spectral/fullrun_pn_xmm0105260401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete