[Fri Jul  6 00:00:41 2012] Detection parameters:
  Position = (271.7, 119.2) = 20 12 37.82 -56 51 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.4 +/- 17.5
  Background counts = 50.2
  Rate = 0.007 +/- 0.001

[Fri Jul  6 00:00:42 2012] Off-axis axis estimate = 13.14'
[Fri Jul  6 01:28:34 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:28:34 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Fri Jul  6 01:28:34 2012] source mask rpix=3.0, npix_max = 48, mask sum = 44, frac = 0.904
[Fri Jul  6 01:28:34 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.00"
[Fri Jul  6 03:15:21 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul  6 03:15:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src13.csv
[Fri Jul  6 03:15:21 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul  6 03:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src13.csv
[Fri Jul  6 03:15:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul  6 03:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jul  6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul  6 03:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jul  6 03:15:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:29:25 2012] Spatial fit model total counts = 1123.970000, observed total counts = 1124.000000
[Fri Jul  6 03:29:25 2012] Offset between fit and detection position for source 9 = 0.632629 pixels
[Fri Jul  6 03:29:25 2012] Warning, changing simple spatial fit ID from 13 to 12
[Fri Jul  6 03:29:25 2012] 1129.440000 total counts/ 1129.440000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.632629 pixels
  Position = (271.2, 118.8) = 20 12 38.09 -56 51 6.1
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 0.0 +/- 33.6
  Background counts = 1129.4
  Rate = 4e-22 +/- 0.002
  Deleting source due to low Poisson probability