[Fri Jul  6 00:00:41 2012] Detection parameters:
  Position = (320.5, 142.7) = 20 12 11.94 -56 49 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 13.8
  Background counts = 46.9
  Rate = 0.004 +/- 0.0008

[Fri Jul  6 00:00:42 2012] Off-axis axis estimate = 11.40'
[Fri Jul  6 01:28:34 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:28:34 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Fri Jul  6 01:28:34 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.948
[Fri Jul  6 01:28:34 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.13"
[Fri Jul  6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jul  6 03:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src28.csv
[Fri Jul  6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jul  6 03:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src28.csv
[Fri Jul  6 03:15:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:15:23 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jul  6 03:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jul  6 03:15:23 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jul  6 03:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jul  6 03:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:29:25 2012] Warning, spatial fit 28 centroid is now closest to src. 24
[Fri Jul  6 03:29:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 03:29:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 03:29:26 2012] Assessing source extent using major
[Fri Jul  6 03:29:26 2012] Source does appear to be extended
[Fri Jul  6 03:29:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:29:26 2012] Source is confused with source 17
[Fri Jul  6 06:17:09 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 06:17:09 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Fri Jul  6 06:17:09 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.948
[Fri Jul  6 06:17:09 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.13"
[Fri Jul  6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jul  6 07:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src23.csv
[Fri Jul  6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jul  6 07:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src23.csv
[Fri Jul  6 07:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 07:54:27 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jul  6 07:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jul  6 07:54:27 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jul  6 07:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jul  6 07:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 08:03:25 2012] Spatial fit model total counts = 674.193000, observed total counts = 587.000000
[Fri Jul  6 08:03:25 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 08:03:25 2012] Spatial fit model total counts = 3798.300000, observed total counts = 3319.000000
[Fri Jul  6 08:03:25 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 08:03:25 2012] Source 19 is offset by -3.614935 and -4.160730 pixels which is larger than
2 X fitted extent = 1.485628 x 1.485628, not incorporating fit results
[Fri Jul  6 08:03:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:03:25 2012] Assessing source extent using major
[Fri Jul  6 08:03:25 2012] Source does appear to be extended
[Fri Jul  6 08:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 08:23:57 2012] XMMSAS src. selection expression = ellipse(27835.002655, 12368.514465, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 08:23:57 2012] Writing source region out to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src19_src.reg
[Fri Jul  6 08:23:57 2012] Extracting stamp from image fullrun_mos1_xmm0105260401_pi300-10000_cl_sm2.00.img.gz, (283, 105) - (358, 180)
[Fri Jul  6 08:23:57 2012] XMMSAS bgd. selection expression = annulus(27835.002655, 12368.514465, 1087.500000, 2175.000000, X, Y) && !ellipse(25581.866723, 11810.490444, 581.925644, 396.045213, 0.000000, X, Y) && !ellipse(25908.715179, 11167.233185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.676000, 10767.856000, 2013.440058, 2013.440058, 0.000000, X, Y) && !ellipse(24821.666534, 10132.399673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24174.188000, 11005.920000, 1926.752055, 1926.752055, 0.000000, X, Y) && !ellipse(24958.097870, 11173.542862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.989380, 12037.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26745.274000, 11631.354000, 502.325614, 502.325614, 0.000000, X, Y) && !ellipse(25261.538513, 10730.885757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25762.312000, 12088.000000, 1261.352036, 1261.352036, 0.000000, X, Y) && !ellipse(26158.234833, 12762.430542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.124000, 12563.754000, 1941.496056, 1941.496056, 0.000000, X, Y) && !ellipse(26498.030792, 11093.817642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.794769, 11599.779938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29233.103912, 11590.123596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30237.209442, 11202.870316, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 08:23:57 2012] Writing fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src19.gif
[Fri Jul  6 08:28:52 2012] Mean detx,y = (-12404.91, 6798.20) 
[Fri Jul  6 08:28:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:29:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:29:05 2012] Setting source spectrum file to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul  6 08:29:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jul  6 08:50:10 2012] Not generating rmf since there are only 70 counts
[Fri Jul  6 08:50:10 2012] rmf not generated due to insufficient counts
[Fri Jul  6 09:08:39 2012] Updating aperture counts using extracted products
[Fri Jul  6 09:08:39 2012] Error reading totcts from fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul  6 09:08:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 09:08:40 2012] Using photon index=1.80, rate=0.00426, arf fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src19.arf
[Fri Jul  6 09:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 09:08:40 2012] Updating source flux to 1.3e-13
[Fri Jul  6 09:08:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting