[Fri Jul 6 00:00:41 2012] Detection parameters: Position = (296.1, 142.7) = 20 12 24.88 -56 49 20.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 73.3 +/- 16.3 Background counts = 69.0 Rate = 0.004 +/- 0.001 [Fri Jul 6 00:00:42 2012] Off-axis axis estimate = 11.29' [Fri Jul 6 01:28:34 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting [Fri Jul 6 01:28:34 2012] Initial guess for spatial extent in simple fitting = 12.07" [Fri Jul 6 01:28:34 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979 [Fri Jul 6 01:28:34 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.07" [Fri Jul 6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src26.ximg exists [Fri Jul 6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src26_1.ximg exists [Fri Jul 6 03:15:22 2012] Fit fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src26 appears to have run properly [Fri Jul 6 03:15:23 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists [Fri Jul 6 03:15:23 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists [Fri Jul 6 03:15:23 2012] Fit fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly [Fri Jul 6 03:29:25 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.043890 pixels away [Fri Jul 6 03:29:26 2012] Vigneting correction estimate = 1.000000 [Fri Jul 6 03:29:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 6 03:29:26 2012] Assessing source extent using major [Fri Jul 6 03:29:26 2012] Source does appear to be extended [Fri Jul 6 03:29:26 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 6 03:29:26 2012] Source is confused with source 2 [Fri Jul 6 06:17:09 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting [Fri Jul 6 06:17:09 2012] Initial guess for spatial extent in simple fitting = 12.07" [Fri Jul 6 06:17:09 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979 [Fri Jul 6 06:17:09 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.07" [Fri Jul 6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src21.ximg exists [Fri Jul 6 07:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src21.csv [Fri Jul 6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src21_1.ximg exists [Fri Jul 6 07:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src21.csv [Fri Jul 6 07:54:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src21_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 6 07:54:27 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Fri Jul 6 07:54:27 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Fri Jul 6 07:54:27 2012] Fit fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly [Fri Jul 6 08:03:25 2012] Source 18 is offset by 3.304092 and 1.370666 pixels which is larger than 2 X fitted extent = 1.445251 x 1.445251, not incorporating fit results [Fri Jul 6 08:03:25 2012] Source 18 is offset by 1.819955 and 6.263287 pixels which is larger than 2 X fitted extent = 2.934745 x 2.934745, not incorporating fit results [Fri Jul 6 08:03:25 2012] Source 18 is offset by 0.673495 and 6.599402 pixels which is larger than 2 X fitted extent = 1.629168 x 1.629168, not incorporating fit results [Fri Jul 6 08:03:25 2012] Source 18 is offset by 0.961748 and -3.161058 pixels which is larger than 2 X fitted extent = 1.424648 x 1.424648, not incorporating fit results [Fri Jul 6 08:03:25 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.741786 pixels away [Fri Jul 6 08:03:25 2012] Spatial fit model total counts = 1078.650000, observed total counts = 1070.000000 [Fri Jul 6 08:03:25 2012] Offset between fit and detection position for source 18 = 3.293369 pixels [Fri Jul 6 08:03:25 2012] Warning, changing simple spatial fit ID from 21 to 24 [Fri Jul 6 08:03:25 2012] 1094.169100 total counts/ 1008.420000 bgd. counts: snr = 2.700280 Spatial fit parameters: Offset between fit and detection position for source 18 = 3.293369 pixels Position = (296.7, 139.5) = 20 12 24.56 -56 49 36.3 Extent = 15.8 (4.2-23.8)", rotation angle = 0 Source counts = 85.7 +/- 33.1 Background counts = 1008.4 Rate = 0.005 +/- 0.002 [Fri Jul 6 08:03:25 2012] Vigneting correction estimate = 1.000000 [Fri Jul 6 08:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 6 08:03:25 2012] Assessing source extent using major axis lower bound [Fri Jul 6 08:03:25 2012] Source does appear to be extended [Fri Jul 6 08:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 6 08:23:56 2012] XMMSAS src. selection expression = ellipse(25762.312000, 12088.000000, 946.014027, 946.014027, 0.000000, X, Y) [Fri Jul 6 08:23:56 2012] Writing source region out to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src18_src.reg [Fri Jul 6 08:23:56 2012] Extracting stamp from image fullrun_mos1_xmm0105260401_pi300-10000_cl_sm2.00.img.gz, (242, 85) - (351, 194) [Fri Jul 6 08:23:57 2012] XMMSAS bgd. selection expression = annulus(25762.312000, 12088.000000, 1576.690045, 3153.380091, X, Y) && !ellipse(25581.866723, 11810.490444, 581.925644, 396.045213, 0.000000, X, Y) && !ellipse(25908.715179, 11167.233185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.676000, 10767.856000, 2013.440058, 2013.440058, 0.000000, X, Y) && !ellipse(24821.666534, 10132.399673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24174.188000, 11005.920000, 1926.752055, 1926.752055, 0.000000, X, Y) && !ellipse(22567.180267, 11256.614746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24958.097870, 11173.542862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22935.852325, 10440.763405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.989380, 12037.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26745.274000, 11631.354000, 502.325614, 502.325614, 0.000000, X, Y) && !ellipse(23572.716858, 11511.180283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22662.599365, 12039.135513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25261.538513, 10730.885757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23366.837921, 10990.963135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.002655, 12368.514465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.234833, 12762.430542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.124000, 12563.754000, 1941.496056, 1941.496056, 0.000000, X, Y) && !ellipse(26498.030792, 11093.817642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.794769, 11599.779938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29233.103912, 11590.123596, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jul 6 08:23:57 2012] Writing fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src18.gif [Fri Jul 6 08:28:22 2012] Mean detx,y = (-13710.22, 5073.39) [Fri Jul 6 08:28:23 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jul 6 08:28:36 2012] Binned source spectrum to 10 counts/bin [Fri Jul 6 08:28:36 2012] Setting source spectrum file to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Fri Jul 6 08:28:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src18_bgd.pi.gz [Fri Jul 6 08:50:01 2012] Not generating rmf since there are only 85 counts [Fri Jul 6 08:50:01 2012] rmf not generated due to insufficient counts [Fri Jul 6 09:08:39 2012] Updating aperture counts using extracted products [Fri Jul 6 09:08:39 2012] Error reading totcts from fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Fri Jul 6 09:08:40 2012] Calculating source flux in energy range 0.30-8.00 [Fri Jul 6 09:08:40 2012] Using photon index=1.80, rate=0.00516, arf fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src18.arf [Fri Jul 6 09:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jul 6 09:08:40 2012] Updating source flux to 1.1e-13 [Fri Jul 6 09:08:41 2012] Flag b found in src. 18 procflags, skipping spectral fitting [Fri Jul 6 09:08:41 2012] Flag c found in src. 18 procflags, skipping spectral fitting [Fri Jul 6 09:08:41 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting