[Fri Jul  6 00:00:41 2012] Detection parameters:
  Position = (404.5, 214.9) = 20 11 27.54 -56 44 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 556.9 +/- 29.3
  Background counts = 31.5
  Rate = 0.06 +/- 0.003

[Fri Jul  6 00:00:42 2012] Off-axis axis estimate = 9.79'
[Fri Jul  6 01:28:34 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:28:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  6 01:28:34 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Fri Jul  6 01:28:34 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.090
[Fri Jul  6 01:28:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.32"
[Fri Jul  6 03:15:21 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul  6 03:15:21 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul  6 03:15:21 2012] Fit fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jul  6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul  6 03:15:22 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul  6 03:15:22 2012] Fit fullrun_mos1_xmm0105260401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul  6 03:29:25 2012] Spatial fit model total counts = 1217.130000, observed total counts = 1170.000000
[Fri Jul  6 03:29:25 2012] Offset between fit and detection position for source 1 = 0.251267 pixels
[Fri Jul  6 03:29:25 2012] 1221.695000 total counts/ 809.252000 bgd. counts: snr = 14.498466
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.251267 pixels
  Position = (404.5, 214.7) = 20 11 27.58 -56 44 8.5
  Extent = 7.0" x 4.8", rotation angle = 136
  Source counts = 412.4 +/- 35.0
  Background counts = 809.3
  Rate = 0.02 +/- 0.002
[Fri Jul  6 03:29:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 03:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 03:29:25 2012] Assessing source extent using major
[Fri Jul  6 03:29:25 2012] Source does appear to be extended
[Fri Jul  6 03:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.48
[Fri Jul  6 06:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 06:17:09 2012] Initial guess for spatial extent in simple fitting = 5.88"
[Fri Jul  6 06:17:09 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.874
[Fri Jul  6 06:17:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.88"
[Fri Jul  6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul  6 07:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src1.csv
[Fri Jul  6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul  6 07:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src1.csv
[Fri Jul  6 07:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul  6 07:54:26 2012] fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul  6 07:54:26 2012] Fit fullrun_mos1_xmm0105260401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul  6 08:03:25 2012] Spatial fit model total counts = 886.951000, observed total counts = 876.000000
[Fri Jul  6 08:03:25 2012] Offset between fit and detection position for source 1 = 0.121715 pixels
[Fri Jul  6 08:03:25 2012] 890.501000 total counts/ 509.193000 bgd. counts: snr = 16.897977
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.121715 pixels
  Position = (404.5, 214.8) = 20 11 27.57 -56 44 8.0
  Extent = 5.8 (5.1-6.4)", rotation angle = 0
  Source counts = 381.3 +/- 29.8
  Background counts = 509.2
  Rate = 0.02 +/- 0.002
[Fri Jul  6 08:03:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:03:25 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 08:03:25 2012] Source does appear to be extended
[Fri Jul  6 08:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 08:23:56 2012] XMMSAS src. selection expression = ellipse(35140.487200, 18638.203400, 347.018410, 347.018410, 0.000000, X, Y)
[Fri Jul  6 08:23:56 2012] Writing source region out to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul  6 08:23:56 2012] Extracting stamp from image fullrun_mos1_xmm0105260401_pi300-10000_cl_sm2.00.img.gz, (385, 195) - (424, 235)
[Fri Jul  6 08:23:56 2012] XMMSAS bgd. selection expression = annulus(35140.487200, 18638.203400, 578.364017, 1156.728033, X, Y)
[Fri Jul  6 08:23:56 2012] Writing fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1.gif
[Fri Jul  6 08:23:59 2012] Mean detx,y = (-3440.93, 10202.53) 
[Fri Jul  6 08:24:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:24:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:24:06 2012] Setting source spectrum file to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul  6 08:24:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul  6 09:08:39 2012] Updating aperture counts using extracted products
[Fri Jul  6 09:08:39 2012] Error reading totcts from fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul  6 09:08:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 09:08:40 2012] Using photon index=1.80, rate=0.023, arf fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1.arf
[Fri Jul  6 09:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 09:08:40 2012] Updating source flux to 4.5e-13
[Fri Jul  6 09:09:45 2012] Reading fit data from xmm0105260401/analysis//spectral/fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul  6 09:09:45 2012] Spectral fit parameter nH value = 8.75464e+19
[Fri Jul  6 09:09:45 2012] Spectral fit parameter PhoIndex value = 2.25472
[Fri Jul  6 09:09:45 2012] Failed to get F(0.3-8.0) from xmm0105260401/analysis//spectral/fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 09:09:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 09:09:45 2012] Using Nh = 8.8e+19, photon index=2.25, rate=0.023, arf fullrun_mos1_xmm0105260401_pi300-10000_pass1_cl_src1.arf
[Fri Jul  6 09:09:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 09:09:45 2012] Updating source flux to 3.8e-13