[Sat May 4 00:54:14 2013] Detection parameters: Position = (386.4, 211.0) = 20 12 31.50 -56 50 13.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 158.6 +/- 28.7 Background counts = 334.7 Rate = 0.02 +/- 0.004 [Sat May 4 00:54:15 2013] Off-axis axis estimate = 8.99' [Sat May 4 00:57:09 2013] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting [Sat May 4 00:57:09 2013] Initial guess for spatial extent in simple fitting = 10.92" [Sat May 4 00:57:09 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992 [Sat May 4 00:57:09 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.92" [Sat May 4 04:51:06 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_src28.ximg exists [Sat May 4 04:51:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_src28.csv [Sat May 4 04:51:06 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_src28_1.ximg exists [Sat May 4 04:51:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_src28.csv [Sat May 4 04:51:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 04:51:08 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Sat May 4 04:51:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src28.csv [Sat May 4 04:51:08 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Sat May 4 04:51:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src28.csv [Sat May 4 04:51:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 11:23:34 2013] Warning, spatial fit 28 centroid is now closest to src. 25 [Sat May 4 11:23:35 2013] Vigneting correction estimate = 1.000000 [Sat May 4 11:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 11:23:35 2013] Assessing source extent using major [Sat May 4 11:23:35 2013] Source does appear to be extended [Sat May 4 11:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 11:23:35 2013] Source is confused with source 34 [Sat May 4 11:23:35 2013] Source is confused with source 40 [Sat May 4 11:24:10 2013] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting [Sat May 4 11:24:10 2013] Initial guess for spatial extent in simple fitting = 10.92" [Sat May 4 11:24:10 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992 [Sat May 4 11:24:10 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.92" [Sat May 4 13:50:29 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_src20.ximg exists [Sat May 4 13:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_src20.csv [Sat May 4 13:50:29 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_src20_1.ximg exists [Sat May 4 13:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_src20.csv [Sat May 4 13:50:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 13:50:30 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Sat May 4 13:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src20.csv [Sat May 4 13:50:30 2013] fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Sat May 4 13:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src20.csv [Sat May 4 13:50:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 18:04:03 2013] Warning, spatial fit 20 centroid is now closest to src. 25 [Sat May 4 18:04:03 2013] Source 29 is offset by 6.032455 and -5.264375 pixels which is larger than 2 X fitted extent = 2.795871 x 1.289724, not incorporating fit results [Sat May 4 18:04:03 2013] Vigneting correction estimate = 1.000000 [Sat May 4 18:04:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 18:04:03 2013] Assessing source extent using major [Sat May 4 18:04:03 2013] Source does appear to be extended [Sat May 4 18:04:03 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 18:04:26 2013] XMMSAS src. selection expression = ellipse(33565.997559, 18304.683395, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 18:04:26 2013] Writing source region out to fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29_src.reg [Sat May 4 18:04:26 2013] Extracting stamp from image fullrun_pn_xmm0105260301_pi300-10000_cl_sm2.00.img.gz, (349, 173) - (424, 248) [Sat May 4 18:04:26 2013] XMMSAS bgd. selection expression = annulus(33565.997559, 18304.683395, 1087.500000, 2175.000000, X, Y) && !ellipse(34514.126800, 18798.908000, 526.615215, 349.755210, 328.827100, X, Y) && !ellipse(31765.165527, 17683.506104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31393.158752, 19995.570663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.759460, 19359.061905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31681.694061, 19179.374832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33987.496735, 18808.497772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30750.453156, 18481.586670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31528.623657, 18416.100372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34358.290161, 18130.651535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33699.218964, 17797.116135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.752000, 18127.154000, 1619.768047, 289.880808, 313.818000, X, Y) && !ellipse(30890.179382, 17713.205261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33129.295685, 17957.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32641.744690, 17013.270508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.954865, 16857.967224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31378.959656, 16923.101730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30913.479919, 16205.590683, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 18:04:26 2013] Writing fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29.gif [Sat May 4 18:10:16 2013] Mean detx,y = (9288.43, 4602.46) [Sat May 4 18:10:18 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 18:10:28 2013] Binned source spectrum to 10 counts/bin [Sat May 4 18:10:29 2013] Setting source spectrum file to fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Sat May 4 18:10:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29_bgd.pi.gz [Sat May 4 18:25:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 4 18:25:23 2013] rmf not generated due to insufficient counts [Sat May 4 19:51:44 2013] Updating aperture counts using extracted products [Sat May 4 19:51:44 2013] Total counts from fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 3110.00 [Sat May 4 19:51:45 2013] Total counts from fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 8065.00 [Sat May 4 19:51:45 2013] Got source and background scale factors 1331664.000000, 4841014.000000 [Sat May 4 19:51:45 2013] User source parameters: Position = (386.4, 211.0) = 20 12 31.50 -56 50 13.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 891.5 +/- 56.8 Background aperture counts = 2218.5 Rate = 0.07 +/- 0.004 [Sat May 4 19:51:45 2013] Updating counts from extracted products [Sat May 4 19:51:45 2013] Set source signif. to 891.48/47.10 = 18.93 [Sat May 4 19:51:48 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 19:51:48 2013] Using photon index=1.80, rate=0.068, arf fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29.arf [Sat May 4 19:51:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 19:51:48 2013] Updating source flux to 3.2e-13 [Sat May 4 19:52:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 19:52:07 2013] xmm0105260301/analysis//spectral/fullrun_pn_xmm0105260301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete