[Sat May  4 00:54:47 2013] Detection parameters:
  Position = (342.7, 202.9) = 20 12 54.66 -56 50 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.9 +/- 17.2
  Background counts = 65.1
  Rate = 0.01 +/- 0.002

[Sat May  4 00:54:48 2013] Off-axis axis estimate = 7.64'
[Sat May  4 04:51:09 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sat May  4 04:51:09 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Sat May  4 04:51:09 2013] source mask rpix=2.4, npix_max = 32, mask sum = 35, frac = 1.073
[Sat May  4 04:51:09 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 10.25"
[Sat May  4 08:38:28 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_src23.ximg exists
[Sat May  4 08:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_src23.csv
[Sat May  4 08:38:28 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat May  4 08:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_src23.csv
[Sat May  4 08:38:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 08:38:30 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat May  4 08:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat May  4 08:38:30 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat May  4 08:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat May  4 08:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 11:23:47 2013] Spatial fit model total counts = 1209.300000, observed total counts = 1054.000000
[Sat May  4 11:23:47 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 11:23:47 2013] Spatial fit model total counts = 1256.980000, observed total counts = 1100.000000
[Sat May  4 11:23:47 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 11:23:47 2013] Vigneting correction estimate = 1.000000
[Sat May  4 11:23:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 11:23:47 2013] Assessing source extent using major
[Sat May  4 11:23:47 2013] Source does appear to be extended
[Sat May  4 11:23:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 11:23:47 2013] Source is confused with source 23
[Sat May  4 11:23:47 2013] Source is confused with source 41
[Sat May  4 13:50:31 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sat May  4 13:50:31 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Sat May  4 13:50:31 2013] source mask rpix=2.4, npix_max = 32, mask sum = 35, frac = 1.073
[Sat May  4 13:50:31 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 10.25"
[Sat May  4 16:13:09 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_src22.ximg exists
[Sat May  4 16:13:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_src22.csv
[Sat May  4 16:13:09 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat May  4 16:13:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_src22.csv
[Sat May  4 16:13:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 16:13:10 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat May  4 16:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat May  4 16:13:10 2013] fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat May  4 16:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat May  4 16:13:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 18:04:10 2013] Spatial fit model total counts = 1195.610000, observed total counts = 1054.000000
[Sat May  4 18:04:10 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 18:04:10 2013] Spatial fit model total counts = 5078.790000, observed total counts = 4676.000000
[Sat May  4 18:04:10 2013] Offset between fit and detection position for source 30 = 2.160298 pixels
[Sat May  4 18:04:10 2013] Warning, changing simple spatial fit ID from 22 to 39
[Sat May  4 18:04:10 2013] 4986.187000 total counts/ 4471.800000 bgd. counts: snr = 7.692169
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.160298 pixels
  Position = (341.3, 201.2) = 20 12 55.37 -56 51 0.2
  Extent = 42.5 (42.5-85.0)" x 15.8 (12.4-20.2)", rotation angle = 298 (288-306) degrees
  Source counts = 514.4 +/- 70.6
  Background counts = 4471.8
  Rate = 0.03 +/- 0.004
[Sat May  4 18:04:10 2013] Vigneting correction estimate = 1.000000
[Sat May  4 18:04:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 18:04:10 2013] Assessing source extent using major axis lower bound
[Sat May  4 18:04:10 2013] Source does appear to be extended
[Sat May  4 18:04:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.10
[Sat May  4 18:04:10 2013] Source is asymmetric
[Sat May  4 18:30:32 2013] XMMSAS src. selection expression = ellipse(29647.964000, 17452.426000, 2550.216073, 945.762027, 297.507800, X, Y)
[Sat May  4 18:30:32 2013] Writing source region out to fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30_src.reg
[Sat May  4 18:30:32 2013] Extracting stamp from image fullrun_mos1_xmm0105260301_pi300-10000_cl_sm2.00.img.gz, (195, 55) - (488, 348)
[Sat May  4 18:30:32 2013] XMMSAS bgd. selection expression = annulus(29647.964000, 17452.426000, 4250.360122, 8500.720245, X, Y) && !ellipse(34545.852000, 18795.736000, 496.071214, 221.024806, 302.442700, X, Y) && !ellipse(32855.476800, 18150.386000, 962.192028, 218.232806, 136.017000, X, Y) && !ellipse(32876.579376, 14017.685913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29535.588745, 16859.399612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31112.630000, 17965.916000, 1666.856048, 375.167211, 125.677500, X, Y) && !ellipse(31107.193512, 17008.614914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33151.558105, 18489.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.314000, 16766.966000, 1723.816050, 1723.816050, 0.000000, X, Y) && !ellipse(33548.522156, 18216.995743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33209.068695, 16943.347656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30629.938000, 16653.902000, 1715.872049, 1090.536031, 310.635500, X, Y) && !ellipse(35186.640717, 18171.075684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.314000, 19307.147000, 2720.240078, 958.760028, 117.189100, X, Y) && !ellipse(33718.287384, 17157.696136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32651.209869, 17525.319458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34172.554932, 18505.516449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34508.445343, 18157.395645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32048.547424, 16228.020370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.738098, 16509.707031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32797.087800, 20213.958000, 1644.984047, 746.284821, 111.243500, X, Y) && !ellipse(30707.798000, 19189.632000, 1033.552030, 609.265618, 90.000000, X, Y) && !ellipse(27323.936000, 16812.908000, 1630.768047, 1630.768047, 0.000000, X, Y) && !ellipse(28580.043701, 18286.415466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29705.494690, 18312.122787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28150.752014, 17157.912521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32184.301727, 19582.118881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30254.194000, 18361.918000, 1663.576048, 741.448021, 97.697350, X, Y) && !ellipse(31563.638184, 19152.109009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29048.108000, 16964.736000, 1700.144049, 1700.144049, 0.000000, X, Y) && !ellipse(30865.806213, 15120.485519, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30247.181732, 16837.459778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30677.224800, 19450.387800, 1526.600044, 1526.600044, 0.000000, X, Y) && !ellipse(29526.675812, 14826.466248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.161957, 16724.245346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29852.668274, 16308.451828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.533142, 14769.170715, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 18:30:32 2013] Writing fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30.gif
[Sat May  4 18:34:10 2013] Mean detx,y = (-7208.83, 6144.96) 
[Sat May  4 18:34:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 18:35:20 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 18:35:21 2013] Setting source spectrum file to fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May  4 18:35:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat May  4 19:51:50 2013] Updating aperture counts using extracted products
[Sat May  4 19:51:50 2013] Total counts from fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 3778.00
[Sat May  4 19:51:50 2013] Total counts from fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 32339.00
[Sat May  4 19:51:50 2013] Got source and background scale factors 6518526.000000, 141155698.000000
[Sat May  4 19:51:50 2013] User source parameters:
  Position = (341.3, 201.2) = 20 12 55.37 -56 51 0.2
  Extent = 42.5 (42.5-85.0)" x 15.8 (12.4-20.2)", rotation angle = 298 (288-306) degrees
  Source aperture counts = 2284.6 +/- 62.5
  Background aperture counts = 1493.4
  Rate = 0.1 +/- 0.004

[Sat May  4 19:51:52 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 19:51:52 2013] Using photon index=1.80, rate=0.0303, arf fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30.arf
[Sat May  4 19:51:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 19:51:52 2013] Updating source flux to 4.4e-13
[Sat May  4 19:51:57 2013] Flag p found in src. 30 procflags, skipping spectral fitting
[Sat May  4 19:51:57 2013] Flag c found in src. 30 procflags, skipping spectral fitting
[Sat May  4 19:52:02 2013] xmm0105260301/analysis//spectral/fullrun_mos1_xmm0105260301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete