[Fri Jun 14 00:59:28 2013] Detection parameters:
  Position = (188.0, 159.3) = 20 12 17.74 -56 49 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.3 +/- 14.2
  Background counts = 53.7
  Rate = 0.003 +/- 0.0008

[Fri Jun 14 00:59:29 2013] Off-axis axis estimate = 12.88'
[Fri Jun 14 02:35:52 2013] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 02:35:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 02:35:52 2013] Initial guess for spatial extent in simple fitting = 12.87"
[Fri Jun 14 02:35:52 2013] source mask rpix=3.0, npix_max = 47, mask sum = 47, frac = 0.982
[Fri Jun 14 02:35:52 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 12.87"
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src15.csv
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src15.csv
[Fri Jun 14 03:03:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jun 14 03:03:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:03:29 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.277420 pixels away
[Fri Jun 14 03:03:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:03:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:03:29 2013] Assessing source extent using major
[Fri Jun 14 03:03:29 2013] Source does appear to be extended
[Fri Jun 14 03:03:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 04:58:34 2013] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 04:58:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 04:58:34 2013] Initial guess for spatial extent in simple fitting = 12.87"
[Fri Jun 14 04:58:34 2013] source mask rpix=3.0, npix_max = 47, mask sum = 47, frac = 0.982
[Fri Jun 14 04:58:34 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.87"
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jun 14 05:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src15.csv
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jun 14 05:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src15.csv
[Fri Jun 14 05:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jun 14 05:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jun 14 05:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jun 14 05:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:28:57 2013] Source 3 is offset by 0.355272 and 2.417321 pixels which is larger than
2 X fitted extent = 1.469554 x 1.920791, not incorporating fit results
[Fri Jun 14 05:28:57 2013] Warning, spatial fit 15 centroid is now closest to src. 8
[Fri Jun 14 05:28:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:28:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:28:57 2013] Assessing source extent using major
[Fri Jun 14 05:28:57 2013] Source does appear to be extended
[Fri Jun 14 05:28:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:28:57 2013] Source is confused with source 11
[Fri Jun 14 06:25:43 2013] XMMSAS src. selection expression = ellipse(16303.161682, 13809.686935, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 06:25:43 2013] Writing source region out to fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 14 06:25:43 2013] Extracting stamp from image fullrun_mos2_xmm0105260201_pi300-10000_cl_sm2.00.img.gz, (150, 122) - (225, 197)
[Fri Jun 14 06:25:43 2013] XMMSAS bgd. selection expression = annulus(16303.161682, 13809.686935, 1087.500000, 2175.000000, X, Y) && !ellipse(15959.196000, 14755.422000, 2023.256058, 906.680026, 227.243000, X, Y) && !ellipse(15496.286331, 15601.167953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16363.414917, 14534.451523, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 06:25:43 2013] Writing fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3.gif
[Fri Jun 14 06:29:17 2013] Mean detx,y = (5059.90, -16525.57) 
[Fri Jun 14 06:29:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 06:29:31 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 06:29:31 2013] Setting source spectrum file to fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 14 06:29:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 14 06:38:51 2013] Not generating rmf since there are only 61 counts
[Fri Jun 14 06:38:51 2013] rmf not generated due to insufficient counts
[Fri Jun 14 06:39:39 2013] Updating aperture counts using extracted products
[Fri Jun 14 06:39:39 2013] Total counts from fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 492.00
[Fri Jun 14 06:39:39 2013] Total counts from fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 982.00
[Fri Jun 14 06:39:39 2013] Got source and background scale factors 1146908.000000, 3058979.000000
[Fri Jun 14 06:39:39 2013] User source parameters:
  Position = (188.0, 159.3) = 20 12 17.74 -56 49 32.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 123.8 +/- 23.2
  Background aperture counts = 368.2
  Rate = 0.007 +/- 0.001

[Fri Jun 14 06:39:39 2013] Updating counts from extracted products
[Fri Jun 14 06:39:39 2013] Set source signif. to 123.82/19.19 = 6.45
[Fri Jun 14 06:39:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 06:39:39 2013] Using photon index=1.80, rate=0.00654, arf fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3.arf
[Fri Jun 14 06:39:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 06:39:39 2013] Updating source flux to 2.4e-13
[Fri Jun 14 06:39:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 06:39:47 2013] xmm0105260201/analysis//spectral/fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete