[Fri Jun 14 00:59:29 2013] Detection parameters:
  Position = (180.4, 174.0) = 20 12 21.71 -56 48 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.9 +/- 16.5
  Background counts = 56.2
  Rate = 0.004 +/- 0.0009

[Fri Jun 14 00:59:29 2013] Off-axis axis estimate = 12.43'
[Fri Jun 14 02:35:52 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 02:35:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 02:35:52 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Fri Jun 14 02:35:52 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Fri Jun 14 02:35:52 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.65"
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src10.csv
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src10.csv
[Fri Jun 14 03:03:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 14 03:03:18 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 14 03:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 14 03:03:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:03:29 2013] Warning, spatial fit 10 centroid is now closest to src. 10
[Fri Jun 14 03:03:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:03:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:03:29 2013] Assessing source extent using major
[Fri Jun 14 03:03:29 2013] Source does appear to be extended
[Fri Jun 14 03:03:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 03:03:29 2013] Source is confused with source 10
[Fri Jun 14 04:58:34 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 04:58:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 04:58:34 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Fri Jun 14 04:58:34 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Fri Jun 14 04:58:34 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 12.65"
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jun 14 05:28:45 2013] Fit fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jun 14 05:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jun 14 05:28:45 2013] fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jun 14 05:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jun 14 05:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:28:57 2013] Spatial fit model total counts = 930.876000, observed total counts = 866.000000
[Fri Jun 14 05:28:57 2013] Offset between fit and detection position for source 11 = 5.267343 pixels
[Fri Jun 14 05:28:57 2013] 969.973000 total counts/ 690.517000 bgd. counts: snr = 10.634725
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 5.267343 pixels
  Position = (184.0, 170.2) = 20 12 19.82 -56 48 44.5
  Extent = 25.3 (24.7-50.6)" x 11.3 (8.4-15.2)", rotation angle = 227 (217-240) degrees
  Source counts = 279.5 +/- 31.1
  Background counts = 690.5
  Rate = 0.01 +/- 0.002
[Fri Jun 14 05:28:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:28:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:28:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 05:28:57 2013] Source does appear to be extended
[Fri Jun 14 05:28:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62
[Fri Jun 14 05:28:57 2013] Source is asymmetric
[Fri Jun 14 06:25:43 2013] XMMSAS src. selection expression = ellipse(15959.196000, 14755.422000, 1517.442044, 680.010020, 227.243000, X, Y)
[Fri Jun 14 06:25:43 2013] Writing source region out to fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11_src.reg
[Fri Jun 14 06:25:43 2013] Extracting stamp from image fullrun_mos2_xmm0105260201_pi300-10000_cl_sm2.00.img.gz, (97, 83) - (271, 257)
[Fri Jun 14 06:25:43 2013] XMMSAS bgd. selection expression = annulus(15959.196000, 14755.422000, 2529.070073, 5058.140146, X, Y) && !ellipse(15496.286331, 15601.167953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16363.414917, 14534.451523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16303.161682, 13809.686935, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 06:25:43 2013] Writing fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11.gif
[Fri Jun 14 06:27:40 2013] Mean detx,y = (5729.35, -15516.29) 
[Fri Jun 14 06:27:41 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 06:28:10 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 06:28:10 2013] Setting source spectrum file to fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 14 06:28:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jun 14 06:39:38 2013] Updating aperture counts using extracted products
[Fri Jun 14 06:39:38 2013] Total counts from fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 865.00
[Fri Jun 14 06:39:38 2013] Total counts from fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 7710.00
[Fri Jun 14 06:39:38 2013] Got source and background scale factors 2029746.000000, 29660375.000000
[Fri Jun 14 06:39:38 2013] User source parameters:
  Position = (184.0, 170.2) = 20 12 19.82 -56 48 44.5
  Extent = 25.3 (24.7-50.6)" x 11.3 (8.4-15.2)", rotation angle = 227 (217-240) degrees
  Source aperture counts = 337.4 +/- 30.4
  Background aperture counts = 527.6
  Rate = 0.02 +/- 0.002

[Fri Jun 14 06:39:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 06:39:39 2013] Using photon index=1.80, rate=0.0148, arf fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11.arf
[Fri Jun 14 06:39:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 06:39:39 2013] Updating source flux to 4.5e-13
[Fri Jun 14 06:39:45 2013] Flag c found in src. 11 procflags, skipping spectral fitting
[Fri Jun 14 06:39:47 2013] xmm0105260201/analysis//spectral/fullrun_mos2_xmm0105260201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete