[Fri Jun 14 00:59:08 2013] Detection parameters:
  Position = (183.0, 169.7) = 20 12 20.35 -56 48 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.5 +/- 15.0
  Background counts = 31.6
  Rate = 0.005 +/- 0.0008

[Fri Jun 14 00:59:08 2013] Off-axis axis estimate = 12.54'
[Fri Jun 14 01:45:40 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:45:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 01:45:40 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Fri Jun 14 01:45:40 2013] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.770
[Fri Jun 14 01:45:40 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.70"
[Fri Jun 14 02:35:52 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun 14 02:35:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_src7.csv
[Fri Jun 14 02:35:52 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun 14 02:35:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_src7.csv
[Fri Jun 14 02:35:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:35:52 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun 14 02:35:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 14 02:35:52 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun 14 02:35:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 14 02:35:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:03:26 2013] Spatial fit model total counts = 674.520000, observed total counts = 507.000000
[Fri Jun 14 03:03:26 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 03:03:26 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:03:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:03:26 2013] Assessing source extent using major
[Fri Jun 14 03:03:26 2013] Source does appear to be extended
[Fri Jun 14 03:03:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 03:03:26 2013] Source is confused with source 5
[Fri Jun 14 03:03:26 2013] Source is confused with source 10
[Fri Jun 14 03:40:29 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 03:40:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 03:40:29 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Fri Jun 14 03:40:29 2013] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.770
[Fri Jun 14 03:40:29 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 12.70"
[Fri Jun 14 04:58:33 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 14 04:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_src7.csv
[Fri Jun 14 04:58:33 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 14 04:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_src7.csv
[Fri Jun 14 04:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 04:58:33 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 14 04:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun 14 04:58:33 2013] fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 14 04:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun 14 04:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:28:54 2013] Warning, spatial fit 7 centroid is now closest to src. 6
[Fri Jun 14 05:28:54 2013] Source 2 is offset by 6.712205 and -5.994752 pixels which is larger than
2 X fitted extent = 1.465949 x 1.465949, not incorporating fit results
[Fri Jun 14 05:28:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:28:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:28:54 2013] Assessing source extent using major
[Fri Jun 14 05:28:54 2013] Source does appear to be extended
[Fri Jun 14 05:28:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 06:02:52 2013] XMMSAS src. selection expression = ellipse(15871.161865, 14718.256546, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 06:02:52 2013] Writing source region out to fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 14 06:02:52 2013] Extracting stamp from image fullrun_mos1_xmm0105260201_pi300-10000_cl_sm2.00.img.gz, (145, 132) - (220, 207)
[Fri Jun 14 06:02:52 2013] XMMSAS bgd. selection expression = annulus(15871.161865, 14718.256546, 1087.500000, 2175.000000, X, Y) && !ellipse(16944.709686, 14838.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15830.366000, 15222.122000, 1971.152057, 1971.152057, 0.000000, X, Y) && !ellipse(16335.664551, 14139.562378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16472.449005, 14858.073044, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 06:02:52 2013] Writing fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2.gif
[Fri Jun 14 06:03:56 2013] Mean detx,y = (-15537.11, -6029.76) 
[Fri Jun 14 06:03:57 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 06:04:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 06:04:11 2013] Setting source spectrum file to fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 14 06:04:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 14 06:20:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 06:20:17 2013] rmf not generated due to insufficient counts
[Fri Jun 14 06:39:36 2013] Updating aperture counts using extracted products
[Fri Jun 14 06:39:36 2013] Total counts from fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 332.00
[Fri Jun 14 06:39:36 2013] Total counts from fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 272.00
[Fri Jun 14 06:39:36 2013] Got source and background scale factors 930302.000000, 898318.000000
[Fri Jun 14 06:39:36 2013] User source parameters:
  Position = (183.0, 169.7) = 20 12 20.35 -56 48 46.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.3 +/- 19.2
  Background aperture counts = 281.7
  Rate = 0.003 +/- 0.001

[Fri Jun 14 06:39:36 2013] Updating counts from extracted products
[Fri Jun 14 06:39:36 2013] Set source signif. to 50.32/16.78 = 3.00
[Fri Jun 14 06:39:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 06:39:37 2013] Using photon index=1.80, rate=0.00266, arf fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2.arf
[Fri Jun 14 06:39:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 06:39:37 2013] Updating source flux to 1e-13
[Fri Jun 14 06:39:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 06:39:45 2013] xmm0105260201/analysis//spectral/fullrun_mos1_xmm0105260201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete