[Mon Jul  2 19:05:44 2012] Detection parameters:
  Position = (345.1, 302.8) = 20 12 49.54 -56 53 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.4 +/- 23.3
  Background counts = 284.1
  Rate = 0.03 +/- 0.003

[Mon Jul  2 19:05:44 2012] Off-axis axis estimate = 3.40'
[Mon Jul  2 19:08:01 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 19:08:01 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Mon Jul  2 19:08:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.069
[Mon Jul  2 19:08:01 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.13"
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src45.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src45.csv
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src45.csv
[Mon Jul  2 21:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Mon Jul  2 21:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:01 2012] Source 47 is offset by 0.584170 and -0.942056 pixels which is larger than
2 X fitted extent = 0.934382 x 0.934382, not incorporating fit results
[Tue Jul  3 00:08:01 2012] Spatial fit model total counts = 3484.850000, observed total counts = 3475.000000
[Tue Jul  3 00:08:01 2012] Offset between fit and detection position for source 47 = 1.162864 pixels
[Tue Jul  3 00:08:01 2012] Warning, changing simple spatial fit ID from 45 to 48
[Tue Jul  3 00:08:01 2012] 3365.194300 total counts/ 3331.960000 bgd. counts: snr = 0.575754
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 1.162864 pixels
  Position = (344.6, 303.8) = 20 12 49.83 -56 53 28.3
  Extent = 2.6 (2.0-12.0)", rotation angle = 63 (10-90) degrees
  Source counts = 33.2 +/- 58.0
  Background counts = 3332.0
  Rate = 0.003 +/- 0.004
  Deleting source due to low Poisson probability