[Mon Jul  2 19:05:43 2012] Detection parameters:
  Position = (376.8, 329.1) = 20 12 32.77 -56 51 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.2 +/- 30.7
  Background counts = 447.6
  Rate = 0.02 +/- 0.003

[Mon Jul  2 19:05:44 2012] Off-axis axis estimate = 6.10'
[Mon Jul  2 19:08:01 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 19:08:01 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Mon Jul  2 19:08:01 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.045
[Mon Jul  2 19:08:01 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.48"
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src28.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src28.csv
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src28.csv
[Mon Jul  2 21:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Jul  2 21:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:01 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.077688 pixels away
[Tue Jul  3 00:08:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:01 2012] Assessing source extent using major
[Tue Jul  3 00:08:01 2012] Source does appear to be extended
[Tue Jul  3 00:08:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:01 2012] Source is confused with source 24
[Tue Jul  3 00:08:20 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 00:08:20 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Tue Jul  3 00:08:20 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.045
[Tue Jul  3 00:08:20 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 9.48"
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src24.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src24.csv
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src24.csv
[Tue Jul  3 02:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Jul  3 02:22:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Jul  3 02:22:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue Jul  3 02:22:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:09:57 2012] Warning, spatial fit 24 centroid is now closest to src. 14
[Tue Jul  3 04:09:57 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:09:57 2012] Assessing source extent using major
[Tue Jul  3 04:09:57 2012] Source does appear to be extended
[Tue Jul  3 04:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:10:13 2012] XMMSAS src. selection expression = ellipse(32732.769714, 28586.665344, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  3 04:10:13 2012] Writing source region out to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src29_src.reg
[Tue Jul  3 04:10:13 2012] Extracting stamp from image fullrun_pn_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (339, 292) - (414, 367)
[Tue Jul  3 04:10:13 2012] XMMSAS bgd. selection expression = annulus(32732.769714, 28586.665344, 1087.500000, 2175.000000, X, Y) && !ellipse(32239.353760, 25946.273224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31481.122528, 28008.800873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33942.167419, 30676.454834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.016479, 30294.396118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32912.778046, 30760.327209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32025.584076, 31115.179840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31373.840759, 30659.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.487122, 30636.900208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31640.429596, 29961.195251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33572.053680, 29880.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32367.458000, 30422.850000, 1359.392039, 1359.392039, 0.000000, X, Y) && !ellipse(33009.344116, 29681.947235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.638000, 29870.018000, 1000.728029, 1000.728029, 0.000000, X, Y) && !ellipse(33701.109344, 29357.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.000732, 29344.917816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33131.520599, 29022.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31168.691600, 29285.742000, 1441.040041, 1441.040041, 0.000000, X, Y) && !ellipse(29786.643005, 28577.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31036.195374, 28669.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.547668, 28233.193329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.645508, 27759.849396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.000000, 27160.457947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.557037, 27289.792389, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 04:10:13 2012] Writing fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src29.gif
[Tue Jul  3 04:19:17 2012] Mean detx,y = (3802.47, -4060.87) 
[Tue Jul  3 04:19:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:19:29 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:19:30 2012] Setting source spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul  3 04:19:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jul  3 04:37:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  3 04:37:36 2012] rmf not generated due to insufficient counts
[Tue Jul  3 07:16:17 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:17 2012] Error reading totcts from fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul  3 07:16:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:17 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src29.arf
[Tue Jul  3 07:16:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:17 2012] Updating source flux to 5.8e-14
[Tue Jul  3 07:18:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting