[Mon Jul  2 19:05:43 2012] Detection parameters:
  Position = (347.6, 337.9) = 20 12 48.24 -56 51 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.0 +/- 30.6
  Background counts = 395.3
  Rate = 0.02 +/- 0.003

[Mon Jul  2 19:05:44 2012] Off-axis axis estimate = 4.57'
[Mon Jul  2 19:08:01 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 19:08:01 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Mon Jul  2 19:08:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Mon Jul  2 19:08:01 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.71"
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src20.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src20.csv
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src20.csv
[Mon Jul  2 21:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Jul  2 21:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:01 2012] Warning, spatial fit 20 centroid is now closest to src. 26
[Tue Jul  3 00:08:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:01 2012] Assessing source extent using major
[Tue Jul  3 00:08:01 2012] Source does appear to be extended
[Tue Jul  3 00:08:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:01 2012] Source is confused with source 19
[Tue Jul  3 00:08:20 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 00:08:20 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Tue Jul  3 00:08:20 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Tue Jul  3 00:08:20 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.71"
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src17.csv
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src17.csv
[Tue Jul  3 02:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jul  3 02:22:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jul  3 02:22:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jul  3 02:22:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:09:57 2012] Source 21 is offset by -4.251279 and -4.382669 pixels which is larger than
2 X fitted extent = 1.100037 x 1.100037, not incorporating fit results
[Tue Jul  3 04:09:57 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:09:57 2012] Assessing source extent using major
[Tue Jul  3 04:09:57 2012] Source does appear to be extended
[Tue Jul  3 04:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:10:13 2012] XMMSAS src. selection expression = ellipse(30196.000732, 29344.917816, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  3 04:10:13 2012] Writing source region out to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src21_src.reg
[Tue Jul  3 04:10:13 2012] Extracting stamp from image fullrun_pn_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (310, 300) - (385, 375)
[Tue Jul  3 04:10:13 2012] XMMSAS bgd. selection expression = annulus(30196.000732, 29344.917816, 1087.500000, 2175.000000, X, Y) && !ellipse(31481.122528, 28008.800873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.016479, 30294.396118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32912.778046, 30760.327209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32025.584076, 31115.179840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31373.840759, 30659.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.487122, 30636.900208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31640.429596, 29961.195251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32367.458000, 30422.850000, 1359.392039, 1359.392039, 0.000000, X, Y) && !ellipse(33009.344116, 29681.947235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.638000, 29870.018000, 1000.728029, 1000.728029, 0.000000, X, Y) && !ellipse(28282.157379, 29135.866119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33131.520599, 29022.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31168.691600, 29285.742000, 1441.040041, 1441.040041, 0.000000, X, Y) && !ellipse(29786.643005, 28577.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28180.546753, 28477.400269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32732.769714, 28586.665344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31036.195374, 28669.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.547668, 28233.193329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28825.381683, 28485.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.379425, 28069.847961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.645508, 27759.849396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29145.525116, 27942.061401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.879395, 27173.403870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.000000, 27160.457947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.141174, 26986.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.930267, 27516.468170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.557037, 27289.792389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29335.357056, 26402.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28199.836800, 26542.381800, 757.610422, 757.610422, 0.000000, X, Y)
[Tue Jul  3 04:10:13 2012] Writing fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src21.gif
[Tue Jul  3 04:17:01 2012] Mean detx,y = (1253.69, -3544.76) 
[Tue Jul  3 04:17:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:17:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:17:12 2012] Setting source spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jul  3 04:17:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jul  3 04:34:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  3 04:34:56 2012] rmf not generated due to insufficient counts
[Tue Jul  3 07:16:17 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:17 2012] Error reading totcts from fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jul  3 07:16:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:17 2012] Using photon index=1.80, rate=0.0163, arf fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src21.arf
[Tue Jul  3 07:16:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:17 2012] Updating source flux to 5.2e-14
[Tue Jul  3 07:18:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting